
<<PanelWriteups.tioga>>
    <<Rick Beach, May 7, 1987 1:42:17 pm PDT>>
Panel #1
Where do User Interfaces Come From?
Chair:    Christopher F. Herot, Javelin Software Corporation
Panelists:    Stuart Card, Xerox Corporation
    Bruce Tognazzini, Apple Computer, Inc.
    Kent Norman, University of Maryland
    Andrew Lippman, Massachusetts Institute of Technology
Introduction
    Everyone who builds a graphics system has to build a user interface.  In most cases, the design of such interfaces is based 
    primarily on intuition.  Proponents of this approach claim that attempts to codify principles of user interface design stifle 
    innovation, human factors research is too narrow to prescribe solutions, and rigorous testing is too time consuming.  Others 
    claim that the fields of Human Factors and Psychology have much to offer and need not be cumbersome or expensive.
    The issue of the relative importance of intuitive design and empirical studies has been subject to debate since the early days of 
    computer graphics.  The members of this panel were chosen for their reputations of holding strong viewpoints on this subject, 
    but as their statements below indicate, the discussion has now progressed to a more mature phase where there is an attempt to 
    combine both approaches.  There is a recognition that human factors and psychological research can be useful if it is directed 
    at discovering models of human cognition which apply to the application at hand.  Interface designers have recognized the value 
    of some form of evaluation of prototype designs short of acceptance or rejection in the marketplace.  Researchers in empirical 
    studies have begun to develop quick and inexpensive methods of doing these evaluations.  Finally, the whole concept of 
    interface design is evolving from the notion of grafted something onto a system to one of designing the entire system to fit a 
    model of how a person uses a computer.
Statement from Stuart Card
    If it can be said that many of the great breakthroughs of technology were the result of intuitive leaps, it can equally be said 
    that many were not.  The question of whether there can ever be anything better than intuitive design of human-computer 
    interfaces is really just a version of the relative effectiveness of traditional ``cut and try'' engineering methods vs. 
    science for advancing technology in this area.  Unfortunately, in the history of different technologies one finds nearly all 
    possible patterns: cases where science was of little or no importance in advancing the technology (e.g., the bicycle), cases 
    where science was very important (e.g., the atomic bomb), and all manner of complex interactions in between.  So we cannot 
    argue for or against the primacy of intuitive design on general grounds, but must understand better the conditions under which 
    cut-and-try methods or science is likely to be an important contributor to technology progress.  As a sort of intellectual 
    first-aid until the historian arrives, let me suggest that science is most likely to be effective (1) when technology gets 
    stuck, as it does from time to time, on problems that require more understanding than cut-and-try methods provide, and (2) when 
    science can identify the key constraints that underlie success for the technology, and (3) when science can provide tools for 
    thought for the designer, especially helping the designer reconceptualize the design space.
    It is important to distinguish in this discussion between the product development context, where the aim is making money, and the 
    research context, where the aim is advancing the state-of-the-art.  Methods that are too time-consuming for product 
    development, such as controlled experiments or theory building, can nonetheless be effective in the research context and, if 
    sucessful, lead to commercial products.  Few companies would have as a task in the development of a cryptographic product 
    figuring out a new method for factoring large numbers, but this task would make sense in an industrial research laboratory or a 
    university department.  Likewise, we have to distinguish between intuitive cut-and-try design (which usually means incremental 
    improvements over existing designs), informal empirical observations (e.g., rapid prototyping), evaluation experiments, and 
    theory building.  The various methods for gaining empirical and analytical information about human interface design vary in the 
    reliability of the information, the amount of insight it produces, and the generizability of the information.  For example, 
    informal observation of a rapid prototype may clearly demonstrate that users have difficulty with some part of the system 
    without giving the designer the faintest clue as to why.  Or comparison of two methods of doing some task may show that one is 
    faster without showing why or whether the difference will hold up in practice or after system revision.  Debate on cut-and-try 
    design vs. empirical or analytical methods must therefore be grounded in whether the context is product development vs. 
    research and just what sorts of methods are being discussed.
    Two examples that illustrate the interaction of science and technology for human-computer interface designs are research on the 
    mouse and the Rooms system.  In the case of the mouse, numerous input devices had been constructed, but there was no way of 
    deciding what was a good device other than empirically comparing every device to every other device for every program they were 
    used in.  Research showed that pointing speed with the mouse just depended on distance and target size (and not on what one was 
    pointing at or the direction of pointing, for example).  The research also showed that the speed of the mouse was limited by 
    the human, not by the mechanics of the mouse itself.  This research helped lead to the commercial introduction of the mouse, to 
    proprietary ideas of how to make other devices, to understanding the key constraints that determine pointing, and to tools for 
    ways to conceptualize designing for the mouse (it helps to make the targets large or nearby).
    In the case of the Rooms system, a window manager for switching among the use of many virtual workspaces, an analysis of window 
    user overhead showed that the real problem is severe space contention because of small screens.  This can be modeled in terms 
    of working set sorts of models and helps suggest the design of the Rooms system by analogy with operating system memory 
    preloading policies.
    In both of the above cases, empirical and analytical science was used to augment cut-and-try engineering methods.  In both cases, 
    the issues were of long-standing and the insight was of use in conceptual design.  At PARC, we have found the coupling between 
    science and design useful enough that we now try in research projects for the following quadruple (first suggested by John 
    Brown): (1) a crisp statement of a problem, (2) a theory analyzing the problem, (3) an artifact in which the theory is 
    embedded, and (4) an ``entailment'' of the theory, that is an application to a different problem showing that the theory has 
    generality.  Several projects in the cognitive sciences (with commercial or potentially commercial payoff) are now reasonable 
    examples of this paradigm.  Intuitions do not arise out of thin air, they come from experience, data, and knowledge of theory.  
    In the case of the mouse, of Rooms, and of the other cognitive science projects above, the intuitions of the designers are 
    greatly improved by the understanding made possible through the research.
    Nothing aids intuitive design like a good theory.
Statement from Bruce Tognazzini
    Many of the great breakthroughs of science and invention were the result of intuitive leaps.  The real power of western science 
    comes from the extraction of what is important in new discovery, and in the building upon that extraction.  A few decades ago, 
    the Tomograph X-ray machine was invented, letting doctors view longitudinal ``slices'' of the human body.  Like most intuitive 
    inventions, how it works seems remarkably obvious once you see it work.  Unfortunately, from the patient's point of view, it is 
    rather terrifying to see it work, tearing down the length of the patient's body while its X-ray source, appearing to weigh 
    several tons, careens around its axis over the patient's head.
    Ungainly as it was, this mechanical contraption had within it a very important concept, one that was translated into the quiet 
    sophistication of the next generation, the Computer Axial Tomograph, or CAT scan, a machine that has revolutionized diagnostic 
    medicine.  Western science performed that translation.
    Computer science is too new not to depend on the creative talent of intuitive minds: The visual interfaces used by Apple, Xerox, 
    and others when developed in the '50's and '60's, smashed every contemporary assumption of human interface design.  It is 
    unlikely that we have now reached such a doddering state of maturity that such leaps will no longer be an important factor in 
    further evolution.  On the other hand, we have reached a state of maturity where we need to look at what we have accomplished 
    and learn from it, if only to prepare for the next leap.
    Thus, I find myself (to my surprise) to be a moderate on the whole issue: I think that the tension between the intuitives and the 
    empirical codifiers (for want of a better term) is the very stuff from which the future will be made.  For without the 
    intuitives we can only evolve into entropy; without the empirical codifiers, we can only have a disconnected series of 
    fascinating starts.
Statement from Kent Norman
    In the history of various sciences, empirical research has served either to ``confirm the obvious'' or to ``dispel the myth.'' 
    Either result contributes to our scientific knowledge base.  In the same way in computer graphics and human/computer 
    interaction, empirical research should serve the function of bearing evidence that a particular design is either the right way 
    to do it or the wrong way.
    Critics of empirical research point out that more often than not system designers just don't have the time for iterative 
    human-factors testing or even for a search of the relevant literature.  The unfortunate result may be that down the road users 
    just don't have the time for such untested systems. The consequence is that corporate research funds are in the end spent to 
    analyze what went wrong rather than how to have designed it right in the first place. The point is that an empirical result 
    will occur whether it has been experimentally planned or not.  It is argued that the safest bet is to gather those data as 
    early as possible.
    Intuitive design is generally the result of intuitions based on anecdotal evidence, intuitions about the cognitive functions, and 
    shear creativity.  Results in the psychology of intuitive statistics indicate that while people are generally good at making 
    gross estimates, there are substantial and predictable errors.  Consequently, we rely on calculators for statistics rather than 
    on heads.  Results in the psychology of thinking and problem solving indicate that creativity is a function of divergent 
    thinking rather than rote application. Consequently, we rely on heads for new ideas rather than on calculators.
    Designers are good at generating innovative alternatives.  While they often make the right choices about software functionality, 
    graphic layout, etc., they are nevertheless subject to biases such as the ethnocentric fallacy.  Designers think that users 
    think like they do.  One of our studies on the layout of menus reveals several discrepancies between how programmers would 
    design menus versus how novice users would prefer them to be displayed.  Usually designers make the right choices; however, 
    discrepancies also exist between how programmers layout menus and performance data.
    At present there is an uneasy relationship between system design and empirical research.  Part of this stems from a conflict of 
    interest.  Planned empirical research is motivated by two different sources.  Research may be theory driven in the sense 
    studies are motivated by a basic need for diagnostic information about a theoretical issue that may or may not impact on design 
    questions.  Basic research on theories, such as cognitive control and cognitive layout, help to provide ways of thinking about 
    design as well as guidelines and design principles.  
    On the other hand, research may be design driven in the sense that studies are motivated by a practical need for diagnostic 
    information about whether Design A or Design B should be implemented that may or may not impact on theoretical questions. Such 
    research is the mainstay of product testing in industry.  The conflict arises due to the priority of theory versus product.
    A second more serious problem is the need for the development of research methods and experimental design specifically tailored to 
    human/computer interaction.  Off-the-shelf methods are ill-suited to the particular problems inherent in research on 
    human/computer interaction.  Instead researchers need to pursue efficient designs capable of studying multiple design factors 
    while at the same time controlling nuisance variables such as individual differences and sporadic system variables.  In 
    addition, standardized performance measures and user evaluations are needed as a means of comparing different implementations. 
    Finally, managers must decide to make a serious investment in qualified researchers in order to gain the edge on system design. 
     It is no longer sufficient to produce an innovative product, one has to provide empirical evidence that it is the right 
    innovation.
Statement from Andrew Lippman
    The notion that there is such a thing as a ``user interface'' is probably the most serious problem in the field today.  The word 
    interface carries with the connotation that one designs a ``system'' to meet some performance criteria and then grafts and 
    ``interface'' to it to make it useful.  Whether the dictates of the interface come from human factors research or are intuitive 
    is beside the point.  The notion is akin to designing a user-friendly policeman who smiles as he hands you a speeding ticket.  
    No interface can make that task a pleasure. The assumed separability of the interface and the task is basically incorrect.  
    Only in the domain of computer systems, where functionality has historically had precedence over usability, has this simple 
    predicate been violated.
    A more direct approach is possible, and it is amenable to the incorporation of human factors research as well as intuition and 
    design.  There is certainly a place for all of these components.  The important notion is that of ``Systems Design.''  Perhaps 
    the most productive approach one can take is to define a useful goal and then assume that technology can be bent to meet it.  
    When the goal places constraints on computer technology, recent history has demonstrated that it is a mistake to underestimate 
    the power of the next generation machine. Similarly, the next generation display hardware and input technology is not so far 
    away nor as expensive as is often assumed.
    One way to approach the design of useful systems is to consider models from existing media.  For example, at the Architecture 
    Machine Group, a personalized information retrieval system called Newspeek is modeled upon the style of presentation and 
    interaction associated with a large format, daily newspaper.  The screen is divided into columns each of which contain a part 
    of a ``lead story'' and a headline.  Gestures on the screen scroll through these articles and highlight similar portions or 
    neighboring ones.  The editors and reporters associated with print newspaper production are computer programs in Newspeek, and 
    they take their cues from the same gestures used to read any particular edition.  Thus the newspaper is ``programmed'' as it is 
    read; it evolves to reflect the interests of the individual reader.
    Similarly, an electronic manual was designed based upon the styles of access associated with a printed book.  It contained a table 
    of contents, chapters, and pages; text was typeset on-the-fly as the book was read, and illustrations were interspersed 
    throughout.  The form of the book was extended by allowing the page to become a workspace rather than a primitive element.  It 
    could be queried for definitions of unfamiliar terms and for elaboration.  The illustrations were sync-sound movies that could 
    be coordinated with the text.
    In both of these examples, an existing information resource was extended rather than replaced.  Successful information resources 
    were mapped into electronic forms, and the displays and data base was built to accommodate successful styles of use.
    Another approach involves modeling the mechanisms and language of interactions drawn from everyday life.  In some cases, the book 
    and newspaper, this is not so difficult; in others, there is no well understood history.  While we know a little about how 
    humans converse, we have yet to build a good computer conversationalist.  However, Schmandt's Phone-Slave, which engages a 
    telephone caller in a synthetic dialogue, goes quite far by exploiting the simple fact that most people will answer a question 
    directly posed to them.  Depending on how much the system knows about the caller, each dialogue can take one of several turns 
    and twists that makes it somewhat individual.
    A current challenge in this area is the notion of interactive movies.  It is generally assumed that an interaction is better as the 
    degrees of freedom and fidelity provided by the computer increase; movies are therefore a logical extension to graphically and 
    aurally parsimonious, typewritten dialogues.  However, we don't have either a technology or a language for interacting with 
    moving images that approaches the simplicity and utility of those used for static printed material, and the movie itself may be 
    ``anti-interactive.'' For the most part, network television, the most ubiquitous example of moving images, has not made the 
    leap to interactivity even though the television receivers and distribution systems contain many of the necessary components. 
Bibliography
Gano, S. ``Forms for Electronic Books.'' Masters thesis, Department of Architecture, Massachusetts Institute of Technology, 
Cambridge, MA, June 1983.
Lippman, A., and Backer, D.S. ``Personalized Aides for Training: An Assault on Publishing.'' Proceedings of the Fourth Annual 
Conference on Video Learning Systems.  Society of Applied Learning Technology, Arlington, Virginia, 1982.
Lippman, A., and Bender, W.  ``News and Movies in The 50 Megabit Living Room.'' Globecom, April 1987.
XXXX.  ``Computing with Television: Paperback Movies.'' Talk given at Images, Information & Interfaces Directions for the 1990s, 
symposium.  New York, NY, November 19, 1986.
XXXX. ``Optical Publishing.'' Computer Society International Conference (COMPCON), San Francisco, CA, February 1985.
XXXX. ``Imaging and Interactivity.'' 15th Joint Conference on Image Technology, Tokyo, Japan, November 1984.
XXXX. ``Video Instrument Control.'' Instrument Society of America (ISA), International Conference and Exhibit, Philadelphia, PA, 
October 1982.
XXXX, and Arons, B.  ``Phone Slave: A Graphical Telecommunications Interface.'' Proceedings, Society for Information Display, San 
Francisco, CA, 1984.
XXXX, and Backer, D. ``Future Interactive Graphics: Personal Video.'' National Computer Graphics Association Conference, Baltimore, 
MD, 1981.
Panel #2
SIGKIDS
Co-Chairs:    Creighton Helsley, Rockwell International
    Coco Conn, Homer & Associates
Panelists:    Scott Crow -12th grade, Grant High School, Sherman Oaks, CA
    Robert Holtz - 8th grade, Chaminade Prep, Northridge, CA
    Joshua Horowitz - 4th grade Open school, Hollywood, CA
    Eddie Lew - 11th grade, Hollywood High School, Hollywood, CA
    Ben Novida - 12th grade, Garfield High School, Los Angeles, CA
    Joe Savella - 12th grade, Garfield High School , Los Angeles, CA
Discussant:    Margaret Minsky, MIT
Summary
    From a panel discussion and video display of the work of ``kid'' panel members, we consider the benefits of having access to 
    computer graphics from a younger perspective.  Each of the students on the panel has implemented programs involving computer 
    graphics.  Four of the panelists are semi-finalists in the 1987 Rockwell International Los Angeles Unified School District 
    Computer Science Competition.  The individual works are outlined below.
    Scott Crow built ``Star Creator'' for the Rockwell International competition.  ``Star Creator'' is both a program and an editor 
    that enables a programmer to incorporate into any program a scrolling or stationary star display onto a graphics screen.  Scott 
    did all his own work in creating star backgrounds which can be easily integrated with any other program.
    Eddie Lew built ``Super Slot,'' a combination hardware and software project, for the Rockwell International contest.  It is 
    designed to emulate a standard three reel, three pay line slot machine, similar to those used in casinos.  It plays one to 
    three quarters and has twelve stops per reel.  This project is designed to work with an IBM Personal Computer equipped with the 
    IBM Enhanced Graphics Adapter (with a 256k video buffer) and the Enhanced Color Display.
    Robert Holtz worked on his first Apple at age 7.  Now at 14 he has a software company, R J Software, that markets several programs 
    that he has developed.  Among these is the Artist program and screen dump for the Apple II GS.  He has also set up a Bulletin 
    Board.  Robert focuses particularly on animation.  He has put together several skits about Snappy, a character he created, on a 
    video paint system that he manipulates to provide animation.  Robert is currently working on a new game for Apple.
    Joshua Horowitz uses LOGO and Video Works for his graphics and animation at the Open Management School in Hollywood.  The Open 
    School is the host site for the Apple Vivarium project, and Josh takes advantages of the Macintosh computers.  As a result of 
    his experience with LOGO, he recently held a guest speaker spot at the Los Angeles LOGO Conference.  For SIGGRAPH '87, he will 
    show his existing work with LOGO and perhaps a project on his new Apple II GS as well.
    Ben Novida's project for the Rockwell International contest was ``Mr. Egghead.''  Although ``Mr. Egghead'' is a program designed to 
    entertain computer enthusiasts, it is also designed to introduce beginners to the concepts of using the computer.  These 
    concepts include: manipulating the keyboard, printing the screen contents to a printer, and saving and unloading files.
    Joe Savella developed a program to compose music called ``Compusynth'' for the Rockwell contest.  ``Compusynth'' involves 
    animation, 3-D graphics, page flipping, easy operation and sound manipulations.  It offers a variety of commands including two 
    unique programmable operations.  ``Compusynth'' comes with a tempo adjustment that can increase or decrease the relative speed 
    of a composition, and six different sound effects like those recognized on Casio portable keyboards.  To add visual effects, 
    there is a piano keyboard that works exactly like a player piano and plays whatever music you compose.
Panel #3
Traditions and the Future of Character Animation
Chair:    John Lasseter, Pixar
Panelists:    Brad Bird, Director
    Alex Carola, Director, Graphoui Studio, Brussels
    John Musker, Director, Walt Disney Animation
    Frank Thomas, Directing animator
Introduction
    Character animation using the computer is becoming more exciting and more accepted today.  But this is not simply a new art form, 
    it is another medium of animation with new and different potential. Other new mediums such as clay, sand, puppet, and cut-out 
    animation have appeared in the past.  Each of these has evolved into its own particular genre.  But this evolution would have 
    taken much longer if nothing had been learned from the many years spent in the development of traditional animation.
    Hopefully, computer character animation will benefit from the history preceding it.  As the basics of traditional character 
    animation are understood and applied, new methods in computer animation will evolve.  Then the computer as a medium of 
    animation will be more solid because its roots will have already been proven in the Walt Disney Studios as well as other 
    studios around the world.
    The panelists will present their contributions to the field of traditional animation and show excerpts from their work. They will 
    discuss their thoughts on the past, present, and future of traditional character animation.  They will also contribute their 
    thoughts on how computer character animation will fit into the future of traditional cel animation.  Through their wide ranging 
    experiences from the Disney Studios past and present, high quality character animation for television, and character animation 
    in Europe, we will get a better understanding of the state of the art of traditional animation today.  Possibly, we will gain 
    insight into the future of computer character animation.
Biographical Notes
    John Lasseter joined the Pixar Computer Animation Group (formerly the Lucasfilm Computer Animation Group) in 1984 after five years 
    as an animator at the Walt Disney Studio.  At Disney, he worked on ``The Fox and the Hound,'' ``Mickey's Christmas Carol,'' 
    ``The Brave Little Toaster,'' and ``The Wild Things Computer Animation Test,'' a combination of hand drawn Disney character 
    animation with computer generated backgrounds. At Pixar, John most recently has written, directed and animated the computer 
    animated short film ``Luxo Jr,'' which received an Academy Award nomination for Best Animated Short Film for 1986.  It has also 
    won awards at the 1987 Berlin Film Festival, the 1986 Canadian International Animation Festival, the 1987 San Francisco Film 
    Festival, NCGA's Computer Graphics '87, and Forum of New Images in Monte Carlo.  John also has animated ``The Adventures of 
    Andre and Wally B.'' and the stained glass knight in ``Young Sherlock Holmes.'' In March 1986, John was awarded the ``Raoul 
    Servais Animation Award'' for his work in 3D computer generated character animation at the Genk International Animation 
    Festival in Genk, Belgium.  John received his BFA in Film from the California Institute of the Arts where he attended the 
    Character Animation Program.  He received two Student Academy Awards in Animation in 1979 and 1980 for his films ``Lady and the 
    Lamp'' and ``Nitemare.''
    Brad Bird is best known for writing and directing ``Family Dog,'' the innovative animated episode of Steve Speilberg's Amazing 
    Stories, which was aired in February of this year.  Brad received his education at California Institute of the Arts, in the 
    Character Animation Program. After CalArts, he worked as an animator at the Walt Disney Studio, working on ``The Fox and The 
    Hound'' and ``The Small One.'' As a freelance animator, he has worked on the feature films, ``Animalympics'' and ``Plague 
    Dogs.''  He has also directed the development of an animated feature film based on Wil Eisner's ``The Spirit'' comic book 
    series.  Brad's writing credits include ``The Main Attraction,'' a live-action episode of Amazing Stories, and he has also 
    co-written ``Captain Eo'' and the upcoming Spielberg feature film ``Batteries Not Included.''  Brad is now working as a 
    freelance writer and director.
    Alex Carola graduated in 1978 from the animation school of La Cambre in Brussels, Belgium.  He was a founding member of Collectif 
    Shampoang Traitant, a group of experimental animation filmmakers.  From 1979 to 1981, he worked in Rome, Italy on many short 
    films including Pino Zac's film ``Capricio Italino,'' ``Ciel!,'' ``Asteroide,'' and ``Flashes Sante,'' a series of medical 
    prevention films.  From 1982 to 1986, Alex worked as an animator and director at the Graphoui Studio in Brussels, where he 
    worked on the TV series ``Yakare.''  He directed several pilot films for TV series and he directed 260 one minute episodes of 
    the popular Belgian TV series ``Quick and Flupke.''  In 1986, Alex established his own production company, Flow S.C., 
    specializing in 2D and 3D computer animation for television and advertising.
    John Musker works as a director for the Walt Disney Studio.  His latest film, ``The Great Mouse Detective,'' was considered by many 
    critics as one of Disney's best animated features in decades.  He has worked at Disney since 1977.  John animated on the films 
    ``The Fox and the Hound'' and ``The Small One.'' He worked as a writer and director on ``The Black Cauldron'' before moving 
    over to develop ``The Great Mouse Detective.''  John is now co-writing and will co-direct the upcoming Disney animated feature 
    ``The Little Mermaid,'' based on Hans Christian Andersen's classic tale.  John received a BA and MA in English from 
    Northwestern University and attended the Character Animation Program at CalArts.
    One of Disney's famous Nine Old Men of animators, Frank Thomas has worked at the Disney Studio since the mid-1930's.  His work on 
    films such as ``Snow White and the Seven Dwarfs,'' ``Pinocchio,'' ``Bambi,'' and ``Peter Pan'' has been important in the 
    development of the art of animation.  In 1978, Frank retired from Disney and authored with Ollie Johnston, ``Disney 
    AnimationThe Illusion of Life,'' which has become the definitive book on Disney animation's history and technique.  Also in 
    1978, Frank received the ``Pioneer in Film'' award from the University of Southern California chapter of Delta Kappa Alpha 
    National Honorary Cinema Fraternity.  He has also received honors from the American Film Institute.  Frank lectures frequently 
    on animation and the computer's application to character animation.
Bibliography
Adamson, J. *Tex Avery: King of Cartoons.* Da Capo Press, 1975.
Adamson, J. *The Walter Lantz Story.* Putnam, 1985.
Blair, P. *Animation.* Walter T. Foster, 1949.
Bocek, J. *Jiri Trnka: Artist and Puppet Master.* Artia, 1965.
Brasch, W. M. *Cartoon Monickers.* Bowling Green Univ. Press, 1983.
Canemaker, J. *The Raggedy Ann & Andy.* Bobbs-Merrill, 1977.
Carbaga, L. *The Fleischer Story.* Nostalgia Press, 1976.
Collins, M. *Norman McLaren.* Canadian Film Institute, 1976.
Crafton, D. *Before Mickey: The Animated Film 1898-1928.* MIT Press, 1982.
Culhane, J. *Walt Disney's Fantasia.* Abrams, 1983.
Culhane, S. *Talking Animals and Other People.* St. Martin's Press, 1986.
Edera, B. *Full Length Animated Feature Films.* Hastings House, 1977.
Feild, R. D. *The Art of Walt Disney.* Macmillan, 1942.
Finch, C. *The Art of Walt Disney.* Abrams, 1973.
Friedwald, W., and Beck, J. *The Warner Brothers Cartoon.* Scarecrow, 1981.
Halas, J. *Graphics in Motion.* Van Nostrand Reinhold, 1981.
Halas, J., and Manvell, R. *Art in Movement.* Hastings House, 1970.
Halas, J., and Manvell, R. *Design in Motion.* Studio, 1962.
Halas, J., and Manvell, R. *The Technique of Film Animation.* Hastings House, 1959.
Heath, B. *Animation in Twelve Hard Lessons.* R.P. Heath Productions, 1972.
Heraldson, D. *Creators of Life: A History of Animation.* Drake's, 1975.
Holloway, R. *Z is for Zagreb.* A.S. Barnes, 1972.
Kitson, C. *Fifty Years of American Animation.* American Film Institute, 1972.
Lasseter, J. ``Principles of Traditional Animation Applied to Computer Animation.'' Proceedings of SIGGRAPH '87. *Computer 
Graphics*, July 1987.
Maltin, L. *Of Mice and Magic.* Plume, 1981.
Manvell, R. *The Animated Film.* Hastings House, 1954.
Manvell, R. *The Art of Animation.* Hastings House, 1980.
Peary, G., and Peary, D. *The American Animated Cartoon.* Dutton, 1981.
Richard, V. T. *Norman McLaren: Manipulator of Movement.* Univ. of Delaware Press, 1982.
Russett, R. *Experimental Animation.* Van Nostrand Reinhold, 1976.
Shale, R. *Donald Duck Joins Up.* UMI Research Press, 1982.
Snow, C. *Walt: Backstage Adventures with Walt Disney.* Windsong, 1980.
Thomas, B. *The Art of Animation.* Simon and Schuster, 1958.
Thomas, F. ``Can Classic Disney Animation Be Duplicated on the Computer?'' *Computer Pictures*, Vol.2, Issue 4, pp 20-26, 
July/August 1984.
Thomas, F., and Johnston, O. *Disney AnimationThe Illusion of Life.* Abbeville Press, 1981.
Whitaker, H., and Halas, J. *Timing for Animation.* Focal Press, 1981.
White, T. *The Animator's Workbook.* Watson-Guptill, 1986.
Panel #4
Tool Kits - A Product of their Environments
Chair:    Ken Perlin, R/Greenberg Associates
Speakers:    Jim Blinn, Jet Propulsion Laboratory
    Tom Duff, AT&T Bell Laboratories
    Craig Reynolds, Symbolics, Inc.
    Bill Lorensen, GE Corporate R&D Center
Summary
    Are some environments inherently better than others for building tool kits?  The panelists, all noted builders of tool kits who 
    work in different software environments, have distinctly different and publicly stated views on this question.
    Three dimensional computer graphics involves such diverse tasks as shape modeling, motion design, and rendering.  Handling these 
    tasks generally requires something more coordinated than an assortment of unrelated tricks and techniques.  Also, something 
    more flexible is required than a closed monolithic system with fixed capabilities.
    A number of researchers have found it useful to create a semantically coherent environment, or 'tool kit', within which new 
    capabilities can be fitted to existing ones flexibly yet gracefully.  The tool kit designer is trying to build a language that 
    models a preferred way of working, or even of looking at the world.  Thus there are as many different flavors of tool kit as 
    there are research goals or methodologies.  The advantages and disadvantages of the various environments available to build on 
    have provoked marked disagreement among leading researchers in the field.  This panel compares software environments within 
    which different tool kits have been built.
    The panelists represent very different points of view.  Tom Duff believes that C and UNIX [1] provide an ideal environment in which 
    to build a graphics tool kit.  He notes that most environments suffer from over-integration, quickly becoming unmanageable, 
    whereas: ``The UNIX text processing tools avoid this syndrome by cutting the text processing problem into many small 
    sub-problems with a small program to handle each piece.  Because all the programs read and write a simple common data 
    representation, they can be wired together for particular applications by a simple command language [2].''
    Jim Blinn believes that this aspect of UNIX is vastly overrated, and maintains that most operating systems are ultimately 
    equivalent, since the tool kit designer eventually builds his/her own preferred semantic layer anyway.  He has said, ``UNIX 
    doesn't have a patent on that sort of philosophy, you know.  Basically, just because you learn about something in some 
    environment doesn't mean it was invented there.  People who start off in UNIX find that it has some good ideas, and so they 
    think, `Ah, this must be the UNIX philosophy.'  They never stop to think that maybe it's just a fundamentally good idea that 
    works for any operating system.  I can tell you I was using tools long before I had any contact with UNIX [3].''   Dr. Blinn 
    works in a FORTRAN/VMS environment.
    The approach at Symbolics is to embed everything in the LISP programming language, taking particular advantage of LISP's generality 
    and generic nature.  The interesting thing here is that the properties of LISP are very different from those of UNIX.  LISP 
    users work in a unified programming language/ operating system.  Instead of many small interconnecting tools, the tool designer 
    works with a single integrated run-time data-base.  Compilation and loading of new procedures is possible at run time, and 
    interpreted and compiled commands can be intermixed within a common language.
    Bill Lorensen represents the object-oriented approach.  In this view, all data is viewed as procedural, sets of procedural types 
    forming a semantic entity.  A tool kit is built from layers of such semantic entities.  The philosophy is to allow for very 
    rich semantics without losing the clarity of structure that a good toolkit needs.
    Sometimes these views are combined effectively.  For example, Reynolds has written a modeling and animation system [4] in LISP that 
    is distinctly object-oriented in structure.
    A number of practical questions test these views.  What types of tools are facilitated by having a particular environment?  Are 
    these tools really difficult or impossible to duplicate in other environments?  For example, what important tools can you 
    create in LISP or in an object-oriented environment that you cannot create in UNIX, or vice versa?  Can all of these things be 
    done in FORTRAN under VMS?  If so, would this be very difficult?  We will also touch on relative efficiency, portability, and 
    ease of learning of the various approaches.
    Perhaps the preference for one's own environment arises because one's very goals become molded by one's environment; those things 
    that are easier to accomplish seem more reasonable.  The panel will try to determine to what extent the researchers' 
    tool-building goals have themselves been influenced by what is easy or hard to do in their particular environment.
References
1.    Kernighan, B., and Pike, R. ``,'' in The UNIX Programming Environment. Prentice Hall, Englewood Cliffs, 1984.
2.    Duff, T. ``Compositing 3-D Rendered Images.'' Computer Graphics 19, 3, July 1985.
3.    Cook, R. ``Interview with Jim Blinn.'' UNIX Review, September 1986.
4.    Reynolds, C. ``Computer Animation with Scripts and Actors.'' Computer Graphics 16, 3, July 1982.
Panel #5
Supercomputer Graphics
Chair:    Richard Weinberg, University of Southern California
Panelists:    Donald P. Greenberg, Cornell University
    Michael Keeler, San Diego Supercomputing Center
    Nelson Max, Lawrence Livermore Laboratory
    Craig Upson, National Center for Supercomputing Applications
    Larry Yaeger, Apple Computer (formerly of Digital Productions)
Statement from Richard Weinberg
    Supercomputers are proving to be an invaluable tool for science, engineering and computer animation.  Although only a few years ago 
    it was very difficult for researchers in the United States to gain access to supercomputers, the creation of five National 
    Science Foundation supercomputer centers has made them widely available.  Because of the enormous computing capacity of these 
    systems, and their use in multi-dimensional, time-varying physical systems simulations, graphics capabilities are a major 
    concern to their users.  However, the most effective use of these systems requires high performance graphics systems coupled to 
    the supercomputers over very high speed networks in integrated software environments.  What lies on the horizon for users of 
    these systems, and what remains to be done?
Statement from Donald P. Greenberg
    Visualization is necessary in supercomputing for the problem-definition and result interpretation of temporal and spatial 
    phenomena.  To improve the potential for scientific discovery it is necessary to correlate multi-dimensional time-dependent 
    parameters; the static display of data of reduced dimensionality can lead to misleading conclusions.
    Today's advanced graphics workstations provide the most efficient and cost effective environments for the graphics display 
    operations as contrasted to graphics processing on the supercomputer.  By remotely computing these display operations, object 
    data instead of image data can be transmitted, thus reducing the bandwidth requirements for the interactive steering of the 
    computations.  New workstation hardware provides hundreds of megaflops performance for the standard kernels of the display 
    pipeline.
    As computation power becomes more available, so will the complexity of the environments simulated.  Standard, direct illumination 
    models are not sufficiently accurate to represent complex spatial phenomena, particularly when color is used to abstractly 
    depict scalar engineering parameters.  Global illumination effects will have to be included to maintain the three-dimensional 
    perception.
    Using current software techniques, development time for the interactive graphics programming of scientific applications is 
    excessive. There is a need to reduce attention to the input/output graphical operations by standardizing high level, user 
    friendly modular graphics environments, thus allowing scientists to concentrate their efforts on science.
Statement from Michael Keeler
    The primary focus of the San Diego Supercomputer Center is to provide a complete and balanced supercomputing environment for a very 
    large number of research-oriented users.  This environment extends over a large, high speed, nationwide communications network, 
    and includes both the hardware and software resources at the central facility, as well as,that at the remote user's terminal or 
    workstation.  We believe a systems approach based on network computing and distributed processing will provide the best way to 
    use most of the available resources. 
    Graphics intensive applications, especially, will benefit from this approach.  As an example, the ideal solution to many problems 
    is to have multiple processes running concurrently on both a front-end workstation and the supercomputer, with interprocess 
    communication via remote procedure calls.  This is a highly complementary combination of technologies that permits each machine 
    to do what it does best (interactive manipulation vs. intensive computation) and makes intelligent use of available bandwidth 
    by reducing data traffic to small amounts of concentrated information.  And most importantly, the user is presented a clean and 
    efficient interface to the entire system. 
    We are keenly aware of the tremendous need for advanced graphics facilities that will serve a large number of people across a wide 
    array of disciplines.  Our approach is one of providing fundamental tools and general purpose utilities that take advantage of 
    our unique resources and make it easier for users to tailor custom applications to the system.  We continue to integrate more 
    capabilities into the network, providing remote access to such things as high quality image generation software as well as 
    film, video and laser disk recorders for animation.
    We want to maximize the effectiveness and availability of expensive hardware and software development by sharing them throughout a 
    large community of users.  It is also essential to educate and train users and share expertise.  The supercomputer center can 
    serve as focal points for this process by providing the new technologies and techniques in graphics to researchers who can 
    apply them as analytical tools in their own endeavors.
Statement from Craig Upson
    Usage of computer graphics and animation falls into two major categories: entertainment-oriented and science-oriented.  These two 
    uses have distinctly different requirements in terms of hardware, software and people to accomplish the work.  In scientific 
    applications there are two major simulation steps: the simulation of the physical process, such as chemical bonding, the 
    advection of a fluid, or the motion of gravity induced waves; and secondly, the visual representation of simulated phenomena.  
    There is little doubt that a supercomputer is the machine of choice for the first step.  For entertainment computer animation, 
    there is (currently) little need for the first step of physical simulation: a simplification that makes the supercomputer quite 
    suitable for entertainment production.  The only remaining question is that of economics, that is, can one charge enough to 
    cover the cost of such a large machine?  For the production of scientific films, there is a major i/o bottleneck if the 
    simulation machine is not the visualization machine.  This is further complicated by the fact that, in general, the 
    supercomputer is a heavily shared resource and thus is difficult to use for interactive image computing and display.  The 
    approach of computing the physical simulation on the supercomputer and the visualization of the computation on another machine 
    with lesser computing capacity, but with perhaps less system load, also has its advantages and disadvantages.  The approach 
    most promising is a network consisting of a supercomputer(s) connected to a near-supercomputer(s) dedicated to visualization.  
    This approach his feasible if the bandwidth between machines is high enough, the near-supercomputer has a large enough compute 
    capacity, and identical rendering software exists on both machines.  This allows a distributed approach to visualization in the 
    computational sciences.
Panel #6
Computer Graphics in Fashion
Chair:    Jane Nisselson, NYIT Computer Graphics Lab
Speakers:    Jerry Weil, AT&T Bell Laboratories
    Ronald Gordon, Microdynamics
    Jim Charles, Esprit de Corp.
Introduction
    Among the many design fields in which computer graphics is making its mark is the fashion industry.  The crossover between these 
    two fields is being stimulated by two key areas of development.  The first is research efforts in computer graphics to create 
    techniques for simulating the physical properties of flexible geometric objects  such as cloth.  The second is the application 
    of standard computer graphics techniques in systems in the fashion industry for design preview and pattern CAD/CAM (computer 
    aided design and manufacturing).  
    This panel gives presentations on current research in techniques for representing clothing in computer animations, application of 
    computer graphics in systems in the fashion industry, and the role of computer graphics in the work of a fashion designer.  
    The evolution of computer graphics techniques has rapidly turned the scope of its visual realm from rigid geometrical objects to 
    those which are naturalistic and organic.  Naturally, as methods developed for simulating flexible surfaces such as that 
    characterizing the human body, the problem of simulating clothing came into focus.  
    Garments are characterized by neither rigid surfaces nor simple geometrical construction.  To accurately represent a garment 
    requires techniques for modeling and animating flexible materials as well as accounting for the effects of physical forces such 
    as gravity.
    While such high-end simulations are being developed in the field of computer graphics, systems using less sophisticated methods for 
    representing clothes are being used in the fashion industry.  The purpose of these systems is to provide (1) an efficient means 
    for visualizing garment designs and (2) an optimal way to create a design to be readily used in a CAM system.  Such systems are 
    faced with the aesthetic and technical challenges of how to simulate and improve upon traditional methods used in the fashion 
    industry.  
    It is in the area of design that the question arises: can fashion benefit from computer graphics applications?  Potential cost 
    benefits from CAD/CAM systems alone may not be an adequate motive for a designer to make use of the technique.  
    It must be kept in mind that one shortcoming of a video image of a garment is that a person cannot touch the fabric and have direct 
    exposure to its colors and its quality.  To model a garment on the computer requires a method for generating a physically 
    accurate model.  But fashion is not merely a functional event whose conjunction of color, movement, and shape can be translated 
    into an algorithm.  
    Computer graphics must be able to create visual effects that evoke the immediacy of a garment and capture the imagination in a way 
    which is true to fashion.  Whether for creating industrial systems, animations of figures, or fashion videos, as computer 
    graphics continues to delve into the tools of the fashion trade, its imagery will be shaped by fashion's emphatic visual 
    delivery.  
Statement from Jerry Weil
    Only recently has the computer graphics community addressed the need for modeling cloth which, in the past, was modeled as rigid 
    surfaces.  The rapid progress towards making realistic models will eventually have a great impact on the fashion industry.
    Imagine a completely interactive, real-time system for designing garments.  Such a system could be used to design, cut and 
    manipulate fabric  all on the computer screen.  This fabric could be draped over other objects, such as a mannequin, thus a 
    designer could interactively create clothes in a realistic, three-dimensional environment.  
    Although current computer hardware is not fast enough to actually allow real-time manipulation of realistic looking fabric, I will 
    describe the model for such manipulation.  In it, the fabric can be parameterized by factors such as its stiffness, elasticity 
    and weight.  By using simple physical equations, forces can be calculated over discrete points on the surface of the cloth. 
    This will dictate the way in which each point will move. Furthermore, the movement of each point on the surface can be tested 
    against collision with other solids which makes it possible to model fabric draped over other objects.  
    In the current implementation of such a system, instead of moving the cloth in real-time, a series of positions for selected points 
    in the cloth's surface must be predetermined by the user.  The movement of the remaining points is then determined according to 
    the defined physical equations.  
    There is great potential for this work in the fashion industry.  When this process takes place in real time, under the designer's 
    control, he would be able to see how the clothing looks and moves before a single cut is made in the actual fabric.
Statement from Ron Gordon
    Computer graphics may be used in the apparel industry to quickly evaluate new fashions.  An initial place where computer graphics 
    can be applied is in the design of new textiles. Prints, as well as woven or knit fabrics, may be simulated thread by thread 
    and the resulting coloration evaluated on screen.  An interface to numerically controlled knitting or weaving machines lets the 
    designer obtain a sample swatch of the proposed fabric.  
    A paint or sketching package may be used to draw and edit new designs, supplementing the pen and paper traditionally used for 
    illustrations.  In this way, the proposed garment can be visualized without a stitch.  
    Once completed, the designer can obtain a hard copy print of the creation with either a color calibrated thermal printer or film.  
    Color accuracy, ease of use, and turn-around time are important parameters for this application.  
    Experience in using a color graphics design system to aid the development and evaluation of new fashions will be presented.  
    Technical issues surrounding accurate color matching will be reviewed.  
Statement from Jim Charles
    The initial idea of using these ominous machines called computers to design with struck fear into the hearts and pocket books of 
    many people in the design room.  Most of these fears were based on the presumption that computers would take away the 
    designers' jobs or that they would be mercilessly tied to this ruthless machine with a mind of its own and never free to make 
    creative decisions again.  
    Another response given by those considering themselves a bit up-to-date and open minded was the presumption that computers had 
    arrived on the scene to assume a large part of their work and could quite possibly solve all their problems. Certainly the 
    computers could boondoggle or dazzle management for at least a season or two.  
    In my first attempt to introduce CAD into the design room, I bought three Macintosh computers because of their reputation for 
    flexible art oriented programs.  We scheduled an orientation class for the textile artists and designers who were brave enough 
    to attend.  Being the arrogant leaders of California style and design, we were confronted by a teacher, who seemed to us to be 
    the epitome of the computer nerd.  He proceeded to confuse, confound and completely poison the sweet taste of even the most 
    inoffensive little design oriented computer that we could begin with. Quelle disastre!
    We were also introduced to some charming computer graphics done by a computer illustrator.  But these gave CAD a definite aesthetic 
    label.  My boss now associated computer designed art with pixilated, jaggy lined images.  We were to get those machines out of 
    the design room; they were certainly not the right thing on which to base our future designs.
    At about this same time, the head of our systems department had received the results of an intensive industry study on which CAD 
    systems were best suited to the garment industry.  From these I selected the one of my preference.
    Now that I had discovered my dream machine, how could I resurrect the CAD subject in the proper light and convince management that 
    it was a good idea, and could save hundreds of thousands of dollars a year.  I arranged several demonstrations.  One major 
    consideration in making such a transition was how our decision fit into the big picture.  We soon found out that other 
    companies, such Levi Strauss & Co., were already receiving the systems that I wanted.  
    After my initial campaigning, my boss called me into her office and said, ``I don't understand it but I can see that it's the way 
    of the future. Okay boys, go get us a computer.''
    Once I started learning to operate the system, I found it easy and only sometimes frustrating.  My experience using the Macintosh 
    made it easier for me to learn a new system.  But what are the benefits?  The old way is still being used and is at hand for 
    the deadline crunches with multicolor. As for the computer system, the first recognizable benefits are the ease of manipulation 
    of color and the ability to make decisions on the production of fabrics and garment styles which can then be merchandised.  I 
    expect many more to come.
Panel #7
The Physical Simulation and Visual Representation of Natural Phenomena
Chair:    Craig Upson, National Center for Supercomputing Applications
Panelists:    Alan Barr, Computer Science Department, Caltech
    Bill Reeves, Pixar
    Robert Wolff, Jet Propulsion Laboratory, Caltech
    Steven Wolfram, Center for Complex Systems Research
Introduction
    Within computer graphics and animation, two major sub-disciplines have developed: graphics for entertainment or artistic purposes, 
    and graphics for scientific or technical purposes.  Computer scientists working on entertainment applications have emphasized 
    the correct visual representation of natural phenomena and have developed ad hoc physical simulations to accomplish this.  
    Computational scientists working in the physical sciences have devoted their efforts to the underlying physics for simulating 
    phenomena, with little emphasis on the visual representation.
    In recent years these two approaches have begun to reach the limits of their ability to work without each other.  The realism 
    required in entertainment animation is beyond that obtainable without physically realistic models.  Similarly, numerical 
    simulations in the physical sciences are complex to the point of being incomprehensible without visual representations.
Statement from Robert S. Wolff
    Most physical systems are described by many parameters (e.g., temperature, density, pressure, magnetic field, velocity, etc.).  
    Depending upon the system, the actual value of each of these parameters can vary considerably over space and time.  Moreover, 
    knowledge of each parameter throughout a system is often severely limited by available data.
    Based on these sparse data sets, one constructs ``models,'' either numerical simulations with ``best-guess'' initial and boundary 
    conditions, or ``heuristic'' models, which rely on the investigator's physical intuition to tie together bits and pieces of 
    observational data with basic physical principles.  Unfortunately, even the best physical intuition cannot provide a dynamical 
    picture of a 3-dimensional, time-dependent, multi-parameter physical system without some graphical aids.
    Until a few years ago, such descriptions were confined to traditional artists' renderings of the physicist's concepts.  Although 
    these renderings are generally very visually appealing, they were based more on belief than on any sort of numerical 
    simulation, and were as often misleading as informative.  However, in the last several years advances in entertainment computer 
    graphics have made possible the utilization of data, analytic and numerical simulations to produce near-realistic 
    visualizations of astrophysical phenomena. 
    An example in point is Jupiter's Magnetsphere: The Movie (J.F. Blinn, R.S. Wolff, 1983) in which representations of spacecraft 
    observations as well as analytic and numerical models of the plasma and magnetic fields in the Jovian system were employed to 
    visualize the morphology and dynamical structure of Jupiter's magnetosphere.  Using this same paradigm, computer graphic 
    techniques developed for the entertainment industry (e.g., fractal representations, texture mapping, particle systems) could be 
    used to model volcanic activity on Hawaii, dust storms on Mars, or accretion of matter into a black hole, among other things.  
    Unfortunately, the scientific community as a hole has largely ignored the many significant advances in the field of computer 
    graphics over the years, and as a result the general state of the art of science data analysis is not very much beyond that 
    which was available 20-30 years ago.
Statement from Alan Barr
    Our research at Caltech centers on the goal of computed visual realism.  We are developing fundamental mathematical and 
    computational methods for synthesizing high fidelity complex images through:
    1.    new rendering methods which more accurately model the physical interaction of light with matter;
    2.    new geometric modeling techniques which simulate the shapes found in nature and manufacturing, and
    3.    methods for automatically setting up and solving stable equations of motion for constrained mechanical and biophysical 
    systems.
    While making films which visually simulate natural phenomena, we encountered an unexpected difficulty: a fundamental dichotomy 
    between pure animation and pure simulation.  In an animation project, the animator knows what he wants and controls the motion 
    of the objects at a very detailed level to achieve the aesthetic goal.  In a simulation project, an artificial universe is 
    created with its own rules of physics.  The objects within the universe act as if they had a mind of their own, and appear to 
    choose what they wish to do rather than what you might want them to do.  Even worse, you can't arbitrarily change their 
    behavior, because it would not be simulation any more  you have to get the objects to do what you want by suitably selecting 
    the initial conditions that properly affect the behavioral equations of motion.
    For instance, in the 1984 SIGGRAPH Omnimax film, we had difficulties with the swimming creatures.  However, the problems were not 
    due to the difficulties of setting up or deriving and solving the swimming equations.  Problems resulted because the creatures 
    were somewhat unmanageable and kept swimming off screen, away from the camera and away from each other.  We had to aim and 
    control them so they would arrive where and when we wanted them. 
Statement from William T. Reeves
    Typically, images of natural phenomena are expensive to generate with computer graphics.  Two productions involving natural 
    phenomena that we have done in the last several years are: the trees and grass background from The Adventures of Andre and 
    Wally B., and the ocean waves from the film Flags and Waves.  The trees and grass models were pure ad hoc simulations.  The 
    waves were based on a simple model which ignored many parameters.  In both, our purpose was to make an interesting film.  The 
    trees and grass required about 8 man-months to develop and the waves took about 6 man-months.  The trees and grass averaged 
    about two hours per frame on a VAX 11/750, and the waves averaged one hour per frame on a Computer Consoles Power 6/32 (about 
    ten times faster than an 11/750).
    I think it's obvious that the best means of making images of a natural phenomenon is to simulate it fully and then make pictures of 
    the resulting data.  If possible, this approach should be followed by both the entertainment and scientific disciplines.  The 
    problem is that quite often it's not possible.  The computing resources necessary to do the simulation sometimes require 
    supercomputers or beyond.  Not many of us have access to this class of computing resource, and if we did there would still be a 
    tradeoff between using it for simulating the phenomenon and for rendering the phenomenon.  For some phenomena, an accurate 
    physical model does not exist.  For other phenomena, where an accurate physical model does exist, the problem is that the data 
    it calculates is nothing you can render.  And finally, sometimes you don't want an object to be physically accurate.  Animation 
    is full of ``impossible'' things like squash and stretch and exaggeration.
    From the visual representation perspective where the sole goal is to make an image, I think it is perfectly acceptable to fake it 
    for any of the reasons above.  An important corollary is ``don't get caught.''  Analyze what is important visually and what 
    isn't.  Spend most of the time making the important things accurate (perhaps by really simulating them) and cheat on the rest.
Panel #8
Software Tools for User Interface Management
Chair:    Dan R. Olsen Jr., Computer Science Department, Brigham Young University
Panelists:    David J. Kasik, Boeing Computer Services
    Peter Tanner, Computer Science Department, University of Waterloo
    Brad Myers, Computer Science Department, University of Toronto
    Jim Rhyne, IBM Watson Research Center
Background
    The subject of User Interface Management Systems (UIMS) has been a topic of research and debate for the last several years.  The 
    goal of such systems has been to automate the production of user interface software.  The problem of building quality user 
    interfaces within available resources is a very important one as the demand for new interactive programs grows.  Prototype 
    UIMSs have been built and some software packages are presently being marketed as such.  Many papers have been published on the 
    topic.
    There still, however, remain a number of unanswered questions.  Is a UIMS an effective tool for building high quality user 
    interfaces or is the run-time cost of abstracting out the user interface too high?  Why are there not more UIMSs available and 
    why are they not more frequently used?  Is simple programmer productivity alone sufficient motivation for learning and adopting 
    yet another programming tool?  What is the difference, if any, between a ``user interface toolbox,'' a windowing system and a 
    UIMS?  What are the differences between a UIMS and the screen generation languages found in fourth generation languages?  In 
    fact, exactly what is a UIMS?
    In order to discuss these questions and to reassess the state of the UIMS art, SIGGRAPH sponsored a workshop on these issues [1].  
    The panelists represent the four workshop subgroups who have each addressed these questions from different points of view.
Goals and Objectives for User Interface Software (David Kasik)
    In establishing the goals and objectives for user interface software, this group defined a characterization of a User Interface 
    Management System (UIMS).  The definition looks at the UIMS as a tool that benefits two different audiences: the end user of an 
    application and the team responsible for the design and implementation of the application.  Both audiences levy different 
    requirements on the UIMS and each benefits from the technology in terms of improved productivity.
    As well as defining a UIMS, the group established a morphology that helps determine the applicability to a particular task of 
    software labeled as a UIMS.  The criteria listed are also useful for categorizing available UIMSs to determine areas for future 
    research.  The criteria are aimed at the same two audiences as the definition and the characterization that the group 
    established initially.
    While the early discussions focused on the UIMS as a technology, the participants in the group looked at the role of the UIMS in 
    software development.  In other words, the first audience affected by UIMS technology is composed of application programmers.  
    The group examined how UIMS fits into or modifies ``traditional'' software engineering methodology.  The principal effect lies 
    in the ability to let the application development team focus on the user interface as one of the first components of a 
    successful application.
    This discussion lead to identification of some holes in the current UIMS technology, especially during the specification and 
    testing/maintenance phases of application development.  The effective implementation of UIMS technology also hinges on 
    accommodation of other computing technologies like artificial intelligence.
Reference Models, Window Systems and Concurrency (Peter Tanner)
    Systems which support user interfaces must not only accommodate but take advantage of many factors that can enrich the 
    human-computer interaction.  Effective use of distributed systems, support for collaborative work, concurrent input, devices 
    such as eye trackers or other head, body or foot mounted devices, and less common media such as voice, touch, and video must 
    all be provided for.  This group worked on defining a generalized expanded role for what are currently called ``window 
    systems.''  The result, the workstation agent (WA), is responsible for managing the hardware devices, including sharing devices 
    among several applications and, through the use of virtual devices, changing the form of the input to better match the needs of 
    its clients - the applications.
    The WA position in the schema of an interactive system is best described as being one of several layers.  The group identified four 
    such layers:
    1.    hardware devices
    2.    workstation agent
    3.    dialogue managers
    4.    applications  one or more of which will be the workstation manager(s).
    The hardware devices provide the ``raw'' interface to the user and include both input and output devices.  The workstation agent is 
    responsible for managing those devices, presenting a device-independent but media-dependent interface to the clients.  It also 
    provides the basic support for multitasking; it must multiplex and demultiplex the devices between multiple clients.  The 
    multiplexing (or scheduling) ``policy'' is determined by the workstation manager.  The dialogue managers are the implementation 
    of the interaction techniques that convert the media-dependent interface to the media-independent interface required by the 
    application.  They provide for the invocation of application modules and for the handling of their responses.
    The application layer is, of course, the set of modules that interact with the data base specific to the application.  Along with 
    these modules, the layer contains one or more workstation agents responsible for setting the policy for sharing devices and 
    allocating resources.
    On the output side, many existing window systems do not provide any image retention possibilities, requiring clients to repaint 
    windows in numerous situations such as when the screen is rearranged or a window is moved.  There are a number of retention 
    possibilities:
    1.    no retention (as is currently common)
    2.    device-dependent such as a bitmap (as in the Teletype 5620)
    3.    partially structured such as a text file
    4.    complete such as a PHIGS or Postscript display file (as in NeWS)
    There are no obvious advantages to integrating the image retention into the workstation agent, but it must be done in a manner that 
    can take advantage of whatever hardware rendering support is offered on a number of displays.  However, complete retention is 
    inappropriately complex for many applications, and may lead to too high a degree of graphical data structure redundancy for 
    other applications.
    With the recent advent of window systems, users are becoming accustomed to accessing several applications simultaneously.  
    Accessing single applications through several windows, and the use of several devices simultaneously available for the user's 
    control of application parameters will become more common.  Concurrent programming mechanisms supporting concurrent lightweight 
    processes with rapid inter-process communication and synchronization will be necessary to fully implement the workstation agent 
    and dialogue managers to provide the level of concurrency that will be required.
Run Time Stucture of UIMS-Supported Applications (Brad Myers)
    This group was responsible for generating a new model for the internal structure of Dialog Managers and how they interface to 
    application programs.  Traditionally, there has been an attempt to have a strong separation between the Dialog Manager and the 
    application programs.  The motivation for this is to provide appropriate modularization and the ability to change the user 
    interface independent of the application.  Unfortunately, this separation has made it difficult to provide semantic feedback 
    and fine grain control which are necessary in many modern user interfaces.  Therefore, the group proposed the beginnings of a 
    model which provides for tighter coupling of the application and the Dialog Manager through the ``Semantic Support Component'' 
    (SSC).  The group discussed a number of possible organizations for the SSC, but emphasizes that this is an area for future 
    research.
    The group also discussed two proposals for the internal architecture of the Dialog Manager: the traditional lexical-syntactic 
    layering, and a homogeneous object space.  The lexical-syntactic division is based on language models, and includes interaction 
    modules such as menus, string input, etc., at the lexical level, and sequencing at the syntactic level.  This division is often 
    ad hoc, however.  The homogeneous object model is based on object-oriented languages like SmallTalk, and is more flexible but 
    provides less support.  Which of these is the most appropriate internal architecture, or whether something entirely different 
    is better, is an important future research area.
Tools and Methodologies (Jim Rhyne)
    For the past few years, UIMS research has concentrated on the tools and methodologies for implementing user interfaces.  While many 
    problems in this area remain unsolved, the Task Group on Tools and Methodologies felt that progress was also needed on tools to 
    support requirements and design.  There was consensus in the group that no single methodology would suit all interface designs 
    and designers, and that tools to support design should be flexible and modular.
    We treated design in two stages.  Requirements Analysis and Conceptual Design (RA/CD) is a tight coupling of the tasks of gathering 
    data about the intended use of the interface and of creating a design strategy well matched to the intended use.  Design and 
    Development encompasses the detailed design of the interface and choices about its implementation.  Tools presently in use to 
    support these activities include: drawing packages, rapid prototyping systems, user models, interaction technique libraries.  
    Tools needed, but not available include: design databases, design languages, consistency analyzers, intelligent design 
    assistants.  Above all, these tools must be compatible with one another, so that designers at all stages can select tools 
    appropriate to their needs.
Reference
1.    Computer Graphics, April 1987

Panel #9
Managing a Computer Graphics Production Facility
Co-Chairs:    Wayne Carlson, Cranston/Csuri Productions
    Larry Elin, Abel Image Research
Moderator:    Larry Elin, Abel Image Research
Panelists:    Wayne Carlson, Cranston/Csuri Productions
    Pete Fosselman, McDonnell Douglas Corp.
    Ken Dozier, Interactive Machines, Inc.
    Carl Rosendahl, Pacific Data Images
Introduction
    The computer graphics industry, as no other, combines the disciplines of computer science, mathematics, art, engineering, and 
    business, and presents graphics facilities managers with unique problems not faced by their counterparts in other industries.  
    The growing proliferation, for CAD/CAM and for other art and engineering uses, has created a new wave of managers who share the 
    same fundamental problems: how to effectively manage the facility and personnel in order to succeed in the world of graphics.
    This management distinctiveness is due to a number of reasons: the intricacies of the high-level software needed to produce top of 
    the line graphics images, the dynamically changing hardware used in the graphics community, the creative personalities of the 
    graphics personnel, the dynamics of the entertainment, engineering, and artistic community that the industry serves, and the 
    lack of basic management training in supervisors that have come up the ladder from the production teams.
    A good number of these management issues are directly related to the creative process itself, as well as to the kind of creative 
    personality that is the life blood of our industry.  A recent article [1] outlines the difference between managing creative 
    people and employees in traditional work situations:
    1.    The employees are often better trained and more able than their managers.
    2.    The personality of the creative person is typically less self organized and more temperamental.
    3.    Creative people's motivations are usually different from those of other workers.
    This same article quotes Bertolt Brecht: ``The time needed for rehearsal is always one week more than the time available.''  This 
    is particularly characteristic of the creative process in computer graphics production.  Because of the nature of image or 
    software design, testing, and creation, deadlines that can be adhered to in a traditional manufacturing environment are 
    challenging to adhere to in the graphics industry. 
    The analysis of a recent management seminar listing [2] revealed that the course outlines for courses in facility personnel 
    management, project management, and operations management differed significantly from the needs of the computer graphics 
    supervisor.  It is clear that the textbook examples of management techniques and philosophies do not always fit the environment 
    in which we operated.
Summary of Panel Presentations
    It is just these differences in management issues that this panel is trying to address.  The panel consists of the general 
    management of two of the premiere commercial production houses, a special projects manager from a world renowned graphics 
    software and production facility, a representative from an aerospace company utilizing graphics production techniques for 
    in-house use, and a manager of a graphics hardware manufacturing firm.  These panelists, with their diverse backgrounds and 
    organizational structures, bring a wealth of experience to be shared with interested observers, many of whom will face similar 
    issues at their respective facilities.  The panelists concur with each other in certain areas of management, and widely 
    disagree in others.
    Each panelist will present an important issue that he faced in his management experience.  He will try to focus on an issue which 
    differs from the conventional management approach.  The following topics suggest many of the critical issues in managing a 
    computer graphics facility:
    1.  Motivating creative employees.
    2.  Managing the finances of a graphics facility.
    3.  Keeping up with the changes in technology.
    4.  The R & D issue: will it produce usable results?
    5.  Coordinating sales/production personnel.
    6.  Managing job stress.
    7.  Dealing with the demanding client.
    8.  Training technical personnel.
    9.  Schedules and the creative process.
    10.  Budgets and the development process.
    The creative and sometimes unexpected techniques used by these panelists in solving the management problems they encounter may 
    provide insights for new CGI facility managers.  Other managers may be pleased to find that they are not alone with their 
    problems. This panel presents a stimulating and enlightening view of life in the commercial computer graphics production 
    facility.  
References
1.    ``How to Manage Creativity.'' Management Today, June 1983.
2.    ``The Management Course.'' Course Catalog of the American Management Association, January-October 1987.
Panel #10
A Comparison of VLSI Graphic Solutions
Chair:    Ed Rodriguez, National Semiconductor
Panelists:    Brent Wientjes, Texas Instruments
    Tom Crawford, Advanced Micro Devices
    Jack Grimes, Intel Corp
    John Blair, National Semiconductor
Discussant:    Jack Bresenham, Winthrop College
Summary
    Graphics capability, once required only by the high-end CAD applications, is now becoming standard equipment on new desktop systems 
    which are used for a wide variety of applications.  Recent developments in VLSI graphic devices are bringing sophisticated 
    graphics techniques to more affordable levels.
    In order to take advantage of the high level of functional integration achievable with today's technology, some architectural 
    decisions must be made at the VLSI components level.  These VLSI devices have become more than simple building blocks, they 
    have become sub-system designs.  Because of the many different graphics applications, architectural solutions which appear 
    ideal for some applications are far from optimal for others.  Unfortunately, because of the level of complexity, subtle 
    features and/or limitations of a particular design are overlooked by quick evaluations.  Careful scrutiny is required by the 
    system's designer to select the appropriate device for his/her specific needs.
    This panel brings together four of the major semiconductor companies addressing the bit-mapped graphics requirements, as well as a 
    leading industry expert in rasterization.  Each design has had to incorporate architectural trade-offs, reflecting different 
    implementation philosophies.  Only the system designer can adequately judge the significant impact each trade-off has to 
    his/her particular application.
    There are a few architectural differences immediately obvious between the four approaches.  The following are a few of the main 
    differences:
    �    planar vs. packed-pixel
    �    programmable vs. ``hard wired'' functions
    �    open vs. closed frame buffer access
    �    hardware vs. software windowing
    �    partitioned vs. integrated architecture
    It is the intent of this panel session to provide the hardware and software designers with a comparison of these VLSI offerings, by 
    clarifying the different architectural philosophies and trade-offs associated with each respective implementation.
Bibliography 
    Asal, M., Short, G., Preston, T., Simpson, R., Roskell, D., and Guttag, K. ``The Texas Instruments 34010 Graphics System 
    Processor.'' IEEE Computer Graphics and Applications (October 1986) 24-39.
    Carinalli, C., and Blair, J.``National's Advanced Graphics Chip Set for High-Performance Graphics.'' IEEE Computer Graphics and 
    Applications (October 1986) 40-48.
    Greenberg, S., Peterson, M., and Witten, I. ``Issues and Experience in the Design of a Window Management System.'' University of 
    Calgary, Alberta, Canada, September 1, 1986. To appear in Proc. of Canadian Information Processing Society, Edmonton, Alberta, 
    Canada, October 21-24, 1986, 12 pages.
    Meyers, B. ``A Complete and Efficient Implementation of Covered Windows.'' IEEE Computer (September 1986) 55-67.
    Shires, G. ``A New VLSI Graphics Coprocessorthe Intel 82786.'' IEEE Computer Graphics and Applications (October 1986) 49-55.
    XXXX. ``Controller Chip Puts Text and Graphics on the Same Bit Map.'' Electronic Design, June 1985.
Panel #11
Computer-Aided Industrial Design: The New Frontiers
Chair:    Del Coates, San Jose State University
Panelists:    David Royer, Ford Motor Company
    Bruce Claxton, Motorola Corporation
    Fred Polito, frogdesign
Introduction
    Although industrial designers are relatively few in number, they affect product development and sales crucially because they 
    determine aesthetic issues.  If you wonder how crucial their role, ask yourself when you bought a car, furniture, or virtually 
    any product without considering how good it looked?  Probably never.  Even military shoppers are known to insist on good 
    looking hardware.  Accordingly, industrial designers are indispensable to more than a third of all U.S. corporations, 
    especially manufacturers of consumer goods.  And their role is growing in importance as more manufacturers come to realize the 
    dividends of good design.  As Christopher Lorenz, Management Editor of The Financial Times notes: ``From Tokyo to Detroit, from 
    Milan to London, companies have begun to realize that they must stop treating design as an afterthought, and cease organizing 
    it as a low-level creature of marketing.....  Instead, they have elevated it to fully-fledged membership of the corporate 
    hierarchy, as it has been for decades in design-minded firms such as Olivetti and IBM.  The design is being exploited more and 
    more to create competitive distinctiveness, not only for premium products but also in the world of mass marketing.''
    Industrial designers are increasingly striving to apply computer technology.  The members of this panel represent such pioneering 
    efforts  at Ford Motor Company, the Motorola Company, and frogdesign, a trend-setting international consulting firm.
Inadequacies of Current Systems
    As the CIM (computer-integrated manufacturing) revolution gains momentum, industrial designers will be forced to adopt computer 
    technology.  Yet, the means for doing so seem woefully inadequate to many indusstrial designers, including frogdesign's Fred 
    Polito.  Despite greater attention to their needs recently, no commerically available system (or combination of systems) 
    adequately meets the needs of industrial designers.  Polito shows the considerable extent to which frogdesign uses its turnkey 
    CAD system, despite its limitations, and suggests how it could be improved.
    Industrial designers belabor two shortcomings more than any others:
    �    The sketching or conceptualization problem.  The designer cannot rapidly model and visualize concepts during the earliest, 
    most creative phases of the design process, especially when they are as complex as an automobile.  Normally, they are forced to 
    work ``off the tube'' with conventional media while the computer idles uselessly.  The computer seldom enters the process until 
    after traditional sketches, drawings and, sometimes, even tangible three-dimensional models have been created.
    �    The rendering problem.  CAD systems cannot produce ``photographic'' images that unambiguously simulate various materials and 
    finishes.  Short comings stem from the fact that realism requires simultation of two distinct kinds of reflection: diffuse 
    reflection (also called ``cosine'' reflection); and specular (mirror-like) reflection which accounts for the appearance of 
    gloss.  Typical rendering software models only diffuse reflection.  (Specular effects are approximated through modified diffuse 
    reflection and by texture-mapping of hypothetical environmental reflections.)  Despite claims to the contrary, no CAD system 
    currently available models true specular reflection. And although specular reflection has been employed to a limited extent by 
    animators, true specular reflection is not readily available in animation systems either.
Beneficial Side-Effects
    In Contrast to these objections, Bruce Claxton is decidedly upbeat about Motorola's CAD experiences.  He is enthusiastic about 
    benefits that more than make up for any inabilities at conceptualization and visualization.  CAD has brought about a degree of 
    consolidation and coordination of the diverse personnel and organization involved in product design and development that might 
    not have been achieved otherwise.  This is due simply to the fact that everyone working on a project now refers to the same 
    database.  Industrial design has become a more integral part of the design process, and the enhanced good will among 
    departments whose objectives seem less disparate now is of inestimable value.  The shortened development time and improved 
    product quality that ensued are more important than how realistically the computer can simulate the appearance of a product or 
    whether designers can do the whole project ``on the tube.''
Meeting the Computer Halfway
    Rather than lamenting the lack of a perfect system, industrial design students working at San Jose University's CADRE Institute are 
    exploring semiCAD techniques that combine the best capabilities of existing computer systems with their own special skills and 
    traditional media.  Results demonstrate that, although not yet optimal, computers have immense potential for increasing quality 
    and productivity.
    One student, for instance, designed wine bottles with a 3-D modeling system ordinarily used for animation.  She began on paper 
    because the modeler was not spontaneous and interactive enough.  But, once a concept was in digital form, she was able to 
    create perspective views of it more quickly and accurately than she could on paper.  She could design a label on a 2-D paint 
    system and ``wrap'' it onto the bottle's surface by transferring it to the 3-D system.  Renderings of such bottle/label 
    combinations look very realistic in the label portion because the diffuse reflection algorithm simulates relatively non-glossy 
    surfaces quite well.  Because the system does not employ a ray-tracing algorithm, however, it merely suggests the glossy 
    quality of glass and cannot show the refractive distortions of transparent material.  However, a designer with reasonable 
    rendering skills needn't be stymied.  By transferring the image from the 3-D system back to the paint sytem, it can be touched 
    up with specular and refractive effects.  Furthermore, the bottle's image can be combined with a real background image (a table 
    setting, for instance) scanned in with a video camera to create a realistic rendering far beyond the capabilities of most 
    designers or the practicalities of normal media.
Less Compliant Applications
    Some industrial design applications, like those of the automobile industry addressed by Ford's Dave Royer, leave less room for 
    compromise and are driving the technology toward the farthest frontier.  The ability to sketch with the computer is important 
    because subtle aesthetic nuances of form seldom can be captured by keystrokes or other relatively analytical methods of input.  
    Although today's rendering algorithms simulate glossy surfaces well enough for animation, they give misleading impressions of 
    actual surface geometry.  This can be crucial in the case of an automobile's subtle surfaces.  The specular reflection of the 
    horizon on a car's surface, for instance, is a key design element as important aesthetically as the car's profile or any other 
    line.  Its proportions, even its apparent size, can change when specular reflection is missing.  In the final analysis, a 
    design cannot be properly judged aesthetically without specular reflection.  Royer describes Ford's efforts to address these 
    issues.
Panel #12
Pretty Pictures Aren't So Pretty Anymore: A Call for Better Theoretical Foundations
Chair:    Rae A. Earnshaw, University of Leeds, UK
Panelists:    Jack E. Bresenham, Winthrop College
    David P. Dobkin, Princeton University
    A. Robin Forrest, University of East Anglia, UK
    Leo J. Guibas, Stanford University and DEC Systems Research Center
Summary
    Analysis and exposition of the theoretical bases for computer graphics and CAD are becoming increasingly important.  Software 
    systems and display hardware are now so sophisticated that the deficiencies in the underlying models of displayed images can be 
    more clearly seen.  Consistency, accuracy, robustness and reliability are some key issues upon which the debate now focuses.  
    Vendors and pragmatists feel satisfied if the results are ``correct'' most of the time.  Theoreticians are horrified at the 
    lack of rigor and formalism in many of the ad hoc approaches adopted by current work.  This panel challenges the assumption 
    that the pragmatic approach is adequate.
    As parallel processing techniques bring the disciplines of computer graphics and image processing together, each can learn lessons 
    from the other.  In addition, it is becoming clear that interface modeling, expert systems techniques, software engineering and 
    VLSI design are all areas where a more formal and rigorous approach can produce significant benefits.  All these impinge upon 
    computer graphics to some extent.  Computer graphics is rapidly moving from a discipline based on pragmatics to one based on 
    formal methods.  Vendors mut be prepared to subject their systems and software to validation criteria.
    All the panel members are participants in the NATO Advanced Study Institute in Italy, 4-17 July 1987.  The theme of this 1987 
    Institute is ``Theoretical Foundations of Computer Graphics and CAD.''  Results arising from the Institute provide a basis for 
    discussion.
    Dr. Earnshaw proposes the virtues of the industry/vendor position.  The end justifies the means, and pragmatists need not be overly 
    concerned with theory.  Dr. Bresenham outlines the industry position and the benefits and disadvantages of theory and practice. 
     Professor Dobkin proposes the need for definition for computational geometry and rendering algorithms.  Professor Forrest 
    argues for consistency, accuracy, robustness, and reliability in graphical and geometric computations.  Professor Guibas argues 
    for the use of tools for the design and analysis of algorithms.
Panel #13
Integration of Computer Integration with Other Special Effects Techniques
Chair:    Christine Z. Chang, R/Greenberg Associates
Panelists:    Tad Gielow, Walt Disney Studios
    Eben Ostby, Pixar
    Randy Roberts, Abel/Omnibus
    Drew Takahashi, Colossal Pictures
Introduction
    Computer animation is used increasingly as a special effects technique in film and video production.  Integrated with other imaging 
    techniques such as motion control, stand animation, live action and optical printing, it can be a useful tool as well as a 
    final element.  Among other things, information can be shared with other computer controled cameras, or images can be generated 
    for rotoscoping or for mattes.  In fact, the final special effect may be largely dependent on computer imagery yet not contain 
    a single computer-generated pixel.
Special Effects Via Integration of Computer Systems (Christine Chang)
    Many principles of computer generated animation are shared with other computerized imaging techniques.  The motion of the camera, 
    aimpoint and/or subjects are manipulated in three dimensional space in CGI, motion control, animation stand and optical printer 
    systems.  By establishing a communications link between computer systems, motion information may be shared.  Moreover, one 
    system can create and preview a motion to be filmed on another.  In addition, since each technique maintains repeatability, 
    matte passes as well as ``beauty'' passes can be produced.  CGI offers the additional capability of manipulating and processing 
    mattes to create elements for new optical effects.  All elements can then be combined via optical printer to yield the final 
    special effect.  Of course, it remains true that successful special effects rely on good design.  Together with an integrated 
    system, the potential of each technique is maximized and new capabilities realized.
Computer Graphics and Cel Animation (Tad Gielow)
    Disney has been using computers and computer animation as a tool for use in special visual effects and in feature animation for 
    several years.  It is a unique approach and as seen in the climax in ``The Great Mouse Detective,'' can contribute to the drama 
    of a scene.  This presentation will provide an insight into the marriage of computer generated backgrounds with classic Disney 
    animation.
Invisible Computer Graphics (Eben Ostby)
    The desired goal of an effects shot is sometimes independent of the means of its production.  In some of the effects we have 
    produced for motion pictures, the goal is to produce images that look computer-generated; in others, the fact that a computer 
    was used to produce the images should remain obscure.  In the latter case, special care must be used to integrate the effect 
    with the rest of the movie.  Work done at Pixar and Lucasfilm to accomplish this has involved:
    �    proper anti-aliasing of rendered frames
    �    accurate motion-blur
    �    highly detailed models
    �    digital compositing
    �    laser frame recording
        Additional attention must be paid to these frames in the process of combining the computer-generated shots with the remainder of 
        the film.
Integration of Computer Graphics with Live Action (Randy Roberts)
    The integration of computer graphics and live action is attractive both economically and aesthetically.  In the past, use of pure 
    computer generated imagery in film production has had problems in cost effectivenes. Mixing it with live action has made more 
    economic sense.  Whether using live backgrounds with CGI animation or shooting actors for rotoscoping CGI motion, the live has 
    made production more feasible.  The live action offers images and motion which would be prohibitively expensive to generate or 
    define on the computer, if possible at all.  Aesthetically, the real world offers an infinite complexity of textures and fluid 
    motion.  The subtle combination of computer graphics with other techniques creates richer images.  CGI should not constantly be 
    calling attention to itself.  In the future, art direction will emphasize images whose technical origins are not obvious.
Yes, Kids, Mixing and Matching Can Be Fun (Drew Takahashi)
    For years I have been lamenting the fact that various special effects production tools each did marvelous things by themselves, but 
    when you tried to combine them, their inability to talk to each other made the process rather cumbersome.  While much has been 
    done of late to address this problem, we at Colossal have found ourselves quite happy with a very different approach which we 
    call Blendo.  Blendo is not a style or technique but an attitude.  It is an inclusive approach which seeks to combine 
    techniques and styles to create a playful feel.  Rather than striving to create a convincing reality, we instead celebrate 
    complexity and contradiction.
    This attitude was originally born from the limitations of low-tech beginnings of our studio.  Where others were using opticals to 
    insert live people into animation, we shot black and white stills, tinted them and shot them combined with artwork under the 
    animation stand.  What we ended up with was very different from an optical solution.  The stylized motion (by shooting the 
    stills on 2's, 3's or even 6's) and the hand applied swimming color actually allowed the photographer's reality to participate 
    in the animated reality without seeming ``matted in.''  Aesthetically, it said something different.
    As the studio's technical capabilities grew, we often chose techniques such as these, not out of necessity but by choice.  This 
    sensibility is not exclusive to low-tech solutions but can easily work with various high-tech approaches.  While much of our 
    work at Colossal is made up of more exclusive and invisible effects (actually, sometimes no effects at all), this attitude, 
    Blendo, is perhaps the most appropriate contribution Colossal can make in the context of this discussion.