0	PlaceRoute.msgs - last edit: Rigler  29-Jan-86 11:35:32
4000	1Ignoring bug, forging ahead.%n
4001	1Etch Router Aborted.%n
4002	1Bad layer option: if all is specified for one layer direction, it must be specifed for both.%n
4003	1Spacing Etch.%n
4004	1Setting up channels.%n
4005	1Etch router aborted while routing.%n
4006	1Routing pin-pin connections.%n
4007	1Routing via connections.%n
4008	1Routing cross-over connections.%n
4009	1Etch router aborted by user.%n
4010	1Writing out etch traces.%n
4011	1%d segments were completed out of %d total (%d %%).%n
4012	1%d etch incompletes were not completed. %d feed-throughs were added.%n
4013	1Checking Etch.%n
4014	1All Done.%n
4015	1Space Etch Aborted.%n
4016	1Click to continue.%n
4017	1%s.%n
4018	1Click to confirm Minimal Space Etch.%n
4019	1Building data structures for layer %u.%n
4020	1Finding invalids.%n
4021	1Shoving etch %s
4022	1.
4023	1%n
4024	1Routing Driver is still processing a command:  aborting deactivation.%n
4025	1Interrupt acknowledged. Stand by...%n
4026	1Pass number %u has finished.%n
4027	1Pass number %u was interrupted by user. Type the pass number with which you want to continue, and then invoke Go!%n
4028	1Click to confirm Routing Driver Go!%n
4029	1Routing Driver window will be closed.  Click to confirm.%n
4030	1Routing Driver is processing pass number %u.%n
4031	1Routing Driver list has been saved to file:  %s.%n
4032	1Click to confirm automatic global routing.%n
4033	1Global router aborted by user.%n
4034	1Routing Driver will continue with pass number %u.  Click to confirm.%n
4035	1Routing Driver is already open.%n
4036	1Pass number does not exist.%n
4037	1Initializing data for global router...%n
4038	1Globally routing nets...%n
4039	1Minimal space etch aborted.%n
4040	1The pin with coordinate (%d, %d) lies outside the routing area...cannot route the connection.%n
4041	1Discarding etch incompletes...%n
4042	1Click left mouse button down to define upper left corner of box, hold down and drag to lower right corner, then lift up.%n
4043	1Root's parent not NIL!%n
4044	1Parent pointer error!%n
4045	1Bad tree!%n
4046	1Updating channel density...%n
4047	1Point has etch on non-signal layer #%u.%n
4048	1Incomplete has etch!%n
4049	1Complete has no etch!%n
4050	1Root has etch!%n
4051	1Non-null from layer on global incomplete!%n
4052	1Rectangles being processed have an unknown orientation.%n
4053	1Unknown file error.%n
4054	1File name is too long.%n
4055	1Invalid operation for file.%n
4056	1Point's coordinate not at either end of etchOnLayer!%n
4057	1First etch bend at same coord as last bend!%n
4058	1Etch on layer array too short!%n
4059	1Zero length etch!%n
4060	1Aperture #%u has an invalid shape.%n
4061	1Top channel edge is at %d; should be at %d.%n
4062	1Bottom channel edge is at %d; should be at %d.%n
4063	1Right channel edge is at %d; should be at %d.%n
4064	1Left channel edge is at %d; should be at %d.%n
4065	1%u nets have unknown types.%n
4066	1%u points have an incorrect routing status.%n
4067	1Layer #%u has an unknown layer type.%n
4068	1Please confirm to overwrite it.%n
4069	1This operation may have caused the channel density to change.  Update channel density to obtain a current channel display.%n
4070	1Apply! in the Routing Properties sheet will create or change a line indicated by the pass number field.%n 
4071	1Via has been placed in such a way that etch might cross other etch.%n
4072	1This file is not a Routing Driver data list file.%n
4073	1File %s already exists. 
4074	1No data has been entered in the Routing Driver window.%n
4075	1Incorrect pass number!%n
4076	1Please specify a file name in the File name: field.%n
4077	1The file %s does not exist.%n
4078	1You can only add a single point to a net using the invoked function.%n
4079	1The specified net(s) have already been deleted.%n
4080	1The stitching nets create net property sheet already exists.%n
4081	1One or more of the selected points are presently on a net.%n
4082	1No net name was specified.%n
4083	1Stitching nets already enabled.%n
4084	1Selection for removal is invalid.%n
5000	1You cannot open the PC board named: %s because it is already open.%n
5001	1You cannot close the PC board named: %s because it is not open.%n
5002	1Placing fully annotated symbols into existing parts.%n
5003	1Your changes will be saved. Click to confirm!%n
5004	1You cannot create another view
5005	1You cannot save your changes
5006	1You cannot erase your changes
5007	1You cannot discard any items
5008	1Your placement will be discarded. Click to confirm!%n
5009	1Your etch complete routing will be discarded. Click to confirm!%n
5010	1Your etch incomplete routing will be discarded. Click to confirm!%n
5011	1All of your connections will be discarded.  Click to confirm!%n
5012	1Your changes will be discarded. Click to confirm!%n
5013	1You cannot edit the PC board
5014	1You cannot deactivate the %s window.%n
5015	1Click to confirm to update channel density.%n
5016	1 while the current operation is in progress.%n
5017	1 until after you edit the PC board.%n
5018	1 for an unknown reason.%n
5019	1You cannot destroy a view
5020	1Invalid coordinate for part!%n
5021	1You cannot close the PC board
5022	1The PC board will be closed. Click to Confirm!%n
5023	1You cannot erase your changes and close the PC board
5024	1You cannot save your changes and close the PC board
5025	1Your changes will be saved and the PC board closed. Click to Confirm!%n
5026	1You cannot create a routing property sheet
5027	1You cannot create a display property sheet
5028	1All PC boards must be closed before the library may be updated.%n
5029	1That operation is not allowed
5030	1Please confirm to do automatic placement.%n
5031	1Please confirm to do automatic etch routing.%n
5032	1Please confirm to do space etch.%n
5033	1Please confirm to do Check Board.%n
5034	1None of the unplaced symbols can be placed in this part.%n
5035	1You must either Apply! or Abort! the property sheet.%n
5036	1Etch cannot be placed on a null layer.  Please set the current layer using the Find key.%n
5037	1The requested operation cannot be attempted until current operation is completed.%n
5038	1That selection operation is not yet implemented.%n
5039	1You cannot use the COPY key
5040	1You cannot use the MOVE key
5041	1Etch cannot be placed beyond the range of the board.%n
5042	1You cannot use the DELETE key
5043	1Reading schematic net list data.%n
5044	1Please select a symbol.%n
5045	1Checking that net list data for the board and schematic are consistent.%n
5046	1All routing connected to the point at coordinate (%d, %d) on the net named: %s with net number %u were made global incomplete because the point cannot connect to layer number %u.%n
5047	1Part cannot be placed beyond the range of the board.%n
5048	1The schematic (.df) for the selected board either does not exist or is being edited.  This board cannot be opened.%n
5049	1You may edit the board, but you will not be able to save the results of packaging or placement changes to the schematic.  Click to confirm.%n
5050	1Tree Bug: Root has sibling.%n
5051	1Tree Bug: Root has parent.%n
5052	1Tree Bug: Abandoned by parent.%n
5053	1Tree Bug: Sibling rivalry.%n
5054	1Tree Bug: Orphan and not root.%n
5055	1Tree Bug: More than 100 siblings.%n
5056	1Etch Bug: EtchComplete point has no etchOnLayer.%n
5057	1You cannot save your changes to the board since you cannot write the schematic.%n
5058	1The request to write the .pcb did not succeed.  Your .df and .pcb could now be inconsistent.  You should use the folder tool recover command on the .df to restore consistency.%n
5059	1The .pcb file for this .pr file already exists.  Please confirm to allow the .pcb file resulting from a previous conversion to be overwritten.%n
5060	1Your changes will be discarded and the board closed. Click to confirm!%n
5061	1Etch Bug: EtchOnLayer array is too short or too long.%n
5062	1You do not have write access to both the .df and .pcb files that you have requested to save.  You cannot save your changes.%n
5063	1You cannot erase your changes to the board since you cannot re-read the schematic.%n
5064	1Please select something and try the operation again.%n
5065	1Edit etch cannot accept nets selected by double-clicking the left mouse button.%n
5066	1Please select a connection that you want to edit and try the operation again.%n
5067	1There is nothing to Apply. Please Abort to exit this mode.%n
5068	1To begin, please select a starting point on the net.%n
5069	1You clicked the right mouse button, but there is nothing to undo.%n
5070	1Connecting where you have indicated will create a loop. Loops are not allowed.%n
5071	1Connecting here will not complete the connection.%n
5072	1Duplicate via ignored.%n
5073	1New via is within a no-via area.%n
5074	1Duplicate bend ignored.%n
5075	1Etch is being placed outside of the routing area.%n
5076	1Etch has crossed a no-route area.%n
5077	1Attempted to apply from too far away.%n
5078	1Lines affected by the stretch command must begin with an orientation that is a multiple of 45 degrees.%n
5079	1Stretch is not allowed when lines do not meet at the stretch point in an angle.%n
5080	1No such command exists.%n
5081	1Edits only occur when you click down and release the mouse inside a window.%n
5082	1This command can only act on etch complete routing.%n
5083	1The selected routes must be collinear for this command.%n
5084	1You cannot close the board since the schematic is locked.%n
5085	1Stretch cannot move an incomplete.%n
5086	1When using this command the selection must not pass pins or vias.%n
5087	1You cannot stretch etch that has part pins or connector pins at the end to be stretched.%n
5088	1You cannot stretch etch that has a via at the end to be stretched.%n
5089	1You cannot stretch etch past forks.%n
5090	1The selected etch must all be on the same layer for this command.%n
5091	1The specified etch is shorter than the default length for a notch.%n
5092	1The selected connections must be at angles that are multiples of 45 degrees.%n
5093	1Unknown problem in Drag, Stretch or Notch.%n
5094	1This command cannot act on a selection that contains a fork.%n
5095	1Etch to be dragged must attach to neighboring etch at an angle that is a multiple of 45 degrees.%n
5096	1The etch segment is already on the specified layer.%n
5097	1Please select a single etch segment.%n
5098	1Drop does not operate on extended selections. Please select a single etch segment.%n
5099	1Vias are not allowed in No-Via and No-Route Areas.%n
5100	1The selection includes some segments that are incomplete.  The etch width was not changed for those segments.%n
5101	1The PC board is not available for placement.%n
5102	1You cannot place symbols on the PC board
5103	1Insufficient disk space to complete the operation.  Please Re-Boot and then delete some files before re-attempting the operation.%n
5104	1There are no more symbols to display.  Use NEXT to start over.%n
5105	1There are no more symbols in the part.%n
5106	1The destination must be specified for placement of pin 1.%n
5108	1The symbol is not on the same page displayed in the Schematic.%n
5109	1Please select a single global incomplete connection.%n
5110	1Line defined by point must stay in one channel.%n
5111	1To Manual Global Route please set the etch incompletes display option for a view.%n
5112	1That channel intersection doesn't have any pins on the net.%n
5113	1No parts, silkscreens or component shapes were contributed to the private library.%n
5114	1No private or system library was found.  This board cannot be opened.%n
5115	1You cannot swap pins on an empty part site.%n
5116	1There were %u symbols placed.%n
5117	1  including %u symbols with unbound pins.%n
5118	1Internal error trying to swap pins - no matching site pin could be found for one of the selected pins.%n
5119	1Estimated Wire Length = %u inches.%n
5120	1Placement Errors = %u.%n
5121	1Neither of the pins selected are attached to a net.  Nothing could be swapped.%n
5122	1No net with internal net number: %u could be found on the schematic.  This net will be deleted.%n
5124	1The selection cannot extend past invisible sections of the net.%n
5125	1The selection cannot be extended in that way.%n
5126	1The selection cannot be extended to that segment.%n
5127	1There are no symbol choices because the part is full.%n
5128	1There are no symbol choices because all of the symbols have been placed.%n
5129	1There is no property sheet for what is now selected.%n
5131	1Please select a part.%n
5133	1There is no System.Lib.%n
5138	1No equivalent sites were found.%n
5139	1Please select a pin.%n
5140	1No equivalent pins were found.%n
5141	1There is no net associated with the selected pin.%n
5146	1Pin1 x value would put pin off grid.  x value updated.%n
5147	1Pin1 y value would put pin off grid.  y value updated.%n
5148	1Apply failed.%n
5154	1Cannot place part %u on PC board since pad stack for pin %u doesn't match any values in the pad stack table for the board.%n
5155	1%n
5158	1No choice made, hence Apply! treated as if Abort!%n
5159	1The destination cannot be beyond the edges of the PC board.%n
5160	1There is already a channel edge at the specified coordinate.%n
5161	1Please select a destination for the channel operation.%n
5162	1The edges of the PC board cannot be deleted.%n
5163	1The edges of the PC board cannot be moved.%n
5164	1You cannot move a channel past its immediate neighbor.%n
5167	1Destination must be an unoccupied part site or contain an empty part site.%n
5170	1The specified part cannot contain that symbol.%n
5171	1The specified site cannot contain that symbol.%n
5174	1Destination must be a pin.%n
5175	1Source and destination pins must be in same part.%n
5176	1Source and destination pins must be in same symbol.%n
5177	1Source and destination pins must be equivalent.%n
5178	1The selected object cannot be copied.%n
5179	1That operation will delete all routes on the selected net.  Please confirm to delete.%n
5180	1Part contains placed symbols. Please confirm deletion of part AND symbols!%n
5181	1Selected item cannot be deleted.%n
5185	1The selected object cannot be moved.%n
5186	1Please select a destination for the move.%n
5188	1Done.%n
5192	1Reading PC board... 
5193	1Problem opening design.%n
5194	1Board has unknown format.%n
5195	1Board has obsolete format.%n
5198	1Board has old format: converting it ...%n
5199	1parts... 
5200	1symbols...
5201	1nets... 
5203	1Design rules have been changed since last store of PC board by Place and Route package.  Please run Space etch or Check Board to verify agreement with design rules.%n
5206	1Unknown AOSStatus.%n
5207	1Symbol is already placed.%n
5208	1Please choose a part to implement the symbol.%n
5209	1Symbol is not in the schematic read by the PlaceRoute tool.%n
5210	1Symbol is placed onto PC board.%n
5211	1Please place your destination marker where you would like the symbol placed.%n
5214	1No free, matching site is available in the part.%n
5215	1No part is available to implement the symbol.%n
5216	1PlaceRoute PC board must first be opened.%n
5217	1PlaceRoute PC board must first be made editable.%n
5219	1Attempt to place connector into part!%n
5221	1Symbol is placed onto PC board, but some pins in the site are unbound.%n
5223	1Schematic specifies that a net named %s with net number %u has etch rule %u but that rule wasn't defined in the trace table of the .DWG file.  The net has been assigned rule number %u.%n
5224	1Saved placement contains %u nets that are no longer in the schematic.%n
5233	1Verifying unplaced symbols can be packaged for board...%n
5234	1...aborted by user.%n
5235	1...done.%n
5236	1Number of unplaced symbols: %u%n
5248	1Symbol %u has pin that is to go to pin number %u on part %u but part has no such pin.%n
5249	1Symbol %u cannot be placed in part %u since a valid pad stack does not exist for pin %u.%n
5250	1Symbol %u has no matching entry in packaging rules.%n
5251	1Symbol parameters:  
5252	1No symbol parameters specified.
5253	1  Dev1 = %s
5254	1  Dev2 = %s
5255	1  Dev3 = %s
5256	1  Physical part = %s
5258	1Plotter name from user.cm file not available on net.%n
5259	1Plotter names available on net are:%n
5260	1%s%n
5261	1Selected plotter is offline.%n
5262	1Printing incompletes.%n
5263	1Board formatted, ready to send.%n
5264	1File PrintTest.vds created, use Courier Tool to send.%n
5265	1No User.cm file.%n
5266	1No 'BoardHardcopy' section in user.cm.%n
5267	1Using plotter %s.%n
5268	1Unrecognized value after 'LayerOption' item. 'all', 'paired' or 'single' expected. 'paired' will be used.%n
5269	1Invalid number after 'Zoom'.%n
5270	1Invalid number after 'Shrink'.%n
5271	1No 'Address' entry under BoardHardcopy section.%n
5272	1Unrecognized boolean value.  'FALSE' will be used.%n
5273	1Plotting layer number %d.%n
5274	1 while the symbol window contains symbols.%n                    To clear the symbol window, select anything on the PC board.%n
5275	1Part # %u has pad stack count of %u which differs from the pin count of %u.%n
5276	1All routing connected to one of the points on the net named: %s with net number %u were made global incomplete because the coordinates stored in the point and routing were inconsistent.%n
5277	1Invalid operation on file: %s.%n
5278	1File %s is too long.%n
5279	1Stop editing %s.%n
5280	1Unknown file error: %s.%n
5281	1There are no visible %s to be selected.%n
5282	1Please make them visible with the Display Properties window.%n
5283	1Please select a part or an etch segment and try the operation again.%n
5284	1System.lib has been replaced by the private library %s.  Any discrepancies between the System.lib and the private library %s may cause problems.%n
5285	1It is recommended that you save or erase any changes and close the board.  You can then safely open the board with the new library.%n
5286	1It is recommended that you close the board.  You can then safely open the board with the new library.%n
5287	1You may not proceed with this operation until the operation currently running on the %s board has completed.%n
5288	1The Display Properties Sheet is already open for this view.%n
5289	1The bounding boxes of the two parts to swap will overlap.%n
5290	1Please click to confirm placement!%n
5291	1The bounding box of the part with reference designator %s will not be entirely inside the board routing area.%n
5292	1The reference designator for part %s will not be entirely inside the board routing area.%n
5293	1The bounding box of the part with reference designator %s will overlap a No-Placement area.%n
5294	1The bounding box of the part with reference designator %s will overlap the part with reference designator %s, and possibly others.%n
5295	1The bounding box of the part with reference designator %s will overlap a No-Etch area.%n
5296	1Automatic placement was stopped in response to the STOP key.%n
5297	1%u of the placed parts overlap at least one No-Etch area.%n
5298	1The reference designators of %u of the placed parts are not completely inside the routing area.%n
5299	1Stretch does not allow etch bends outside the range of the board.%n
5300	1Vias cannot be moved outside of the routing area.%n
5301	1Please press both mouse buttons over the word "Choices" to see the set of choices allowed.%n
5302	1    Logical pin: %u with physical pin: %u type: %s swap code: %u %n
5303	1    Physical pin: %u type: %s swap code: %u refDes: %s siteNum %u %n
5304	1Logical element with refDes: %s siteNum %u dev*: %s %s %s and phys part: %s %n
5305	1Physical element with refDes: %s siteNum %u %n
5306	1Net: %u named: %s contains ...%n
5307	1Physical pins not on any net ...%n
5308	1A pin with physical pin number %u on a part with reference designator %s, site number %u, type %s and swap code %u cannot be attached to any net with the same type and swap code.%n
5309	1Net number %u named %s with type %s and swap code %u is being deleted from the board because no net with a matching number was found on the schematic.%n
5312	1Net number %u is being renamed from %s to %s.%n
5313	1Net number %u named %s is being changed from etch rule %u to etch rule %u.%n
5314	1Layer number %u of type %s and swap code %u has no matching net.%n
5315	1Net with number %u named %s contains %u unplaced physical connector symbols.%n
5316	1Power or ground net with number %u named %s contains no physical connector symbols.%n
5317	1In the schematic property sheet for a symbol with id: %u pin number %u was annotated with part pin number %u.  The type or swap code of that pin on part with id: %u does not match the symbol's pin.%n
5318	1Pin number %u on part with id: %u is used both by pin number %u and some other pin on symbol with id: %u.%n
5319	1Part with id %u can contain symbol with id %u in site number %u.%n
5321	1Part with id %u cannot contain symbol with id %u in any site.%n
5322	1Adding a pin with symbol pin number %u and physical pin number %u on a symbol with id %u and reference designator %s to logical net number %u.  The pin has swap code %u and the net has swap code %u.%n
5323	1Adding a pin with symbol pin number %u and physical pin number %u on a symbol with id %u and reference designator %s to logical net number %u.  The pin has type %s and the net has type %s.%n
5324	1Adding a pin with physical pin number %u on a part with id %u and reference designator %s to physical net number %u.  The pin has type %s and the net has type %s.%n
5325	1Adding a pin with physical pin number %u on a part with id %u and reference designator %s and site number %u to physical net number %u.  The pin has swap code %u and the net has swap code %u.%n
5326	1The current layer pair cannot be changed once etch incompletes have been drawn.%n
5327	1There are no layer pairs displayed.  Please use the display property sheet to display a layer pair.%n
5328	1There is no corresponding etch rule for the etch segment with width %u mils on the net named %s with net number %u and end coordinates of (%d, %d) and (%d, %d).  Etch rule %u was substituted.%n
5329	1The %s cannot connect to layer number %u.%n
5330	1The string %s is being used and has been replaced by %s.  Please select Apply! in the property sheet to confirm the change.%n
5332	1The coordinate of pin number %u on the part with id %u has changed as a result of converting the connector.%n
5333	1The part id %u given for the connector named %s is not valid.  Please specify a valid part id.%n
5334	1To convert connectors please enter a valid part id and orientation for each connector listed in the Connector Conversion property sheet.%n
5336	1Board was last written with version %s software. 
5337	1Board file type is %s. 
5338	1Board was last edited by %s. 
5339	1Purpose of last edit was %s. 
5340	1Last edit was at %s.%n
5342	1Problem reading board:  bad layer.%n
5343	1Problem reading board:  bad keepout.%n
5344	1Problem reading board:  bad via grid.%n
5345	1%nProblem reading board:  bad aperture.%n 
5348	1Board written.%n
5351	1File is unreadable; probably truncated.%n
5352	1Problem reading board:  Section %u was too big; reading aborted.%n
5353	1Problem reading board; invalid section.  Last valid section was %u.%n
5354	1Problem reading board; bad version:  %u.%n
5356	1Problem reading board:  bad pin grid length: %u.%n
5357	1%nProblem reading board: bad aperture shape.%n 
5358	1Problem reading board: bad via pad stack length.%n
5359	1Problem reading board: inconsistent number of etch rules.%n
5361	1%nProblem reading board: there is no part for the part pin at coordinate (%d,%d) on net #: %u (%s).  All routing to it will be deleted.%n
5362	1design rules... 
5363	1You may edit the board, but you will not be able to save the changes.  Click to confirm.%n
5364	1%nThe number of pins on part %s has changed since the board was last read.%n  
5365	1All routing attached to pin numbers above %u will be deleted.%n
5366	1Pin number %u on part %s no longer exists.  The old routing has been deleted.%n
5367	1The routing between the points with coordinates (%d,%d) and (%d,%d) was made incomplete because the etch rule of one of its segments no longer exists.%n
5368	1The part %s with id %u and pin-1 coordinate (%d,%d) already exists.  It will keep that reference designator rather than %s.%n 
5369	1Pin number %u on part %s with id %u indexes pad stack %u, which no longer exists in the Part Pad Stack Tables.%n
5370	1Unknown aperture shape...will change to circle.%n
5371	1Aperture's height (%u) and width (%u) are unequal...size will default to height.%n 
5372	1Unknown rectangle type found.%n
5373	1Unknown layer type found.%n
5374	1%s spacing too small to be displayed reasonably.%n
5376	1Negative values not allowed in grid property sheet.%n
5377	1Zero not allowed for grid steps.%n
5378	1Automatic placement grid values must be in multiples of the manual placement grid.%n
5379	1Click the left mouse button to confirm changing via grid step (one or more existing vias will be off grid).%n
5380	1Click the left mouse button to confirm changing manual placement grid step (one or more part pin-1's will be off grid).%n
5381	1Click the left mouse button to confirm converting the pr file to the new file format.%n
5382	1Please confirm to delete all empty parts.%n
5383	1The Grid Properties Sheet is already open for this board.%n
5384	1The Color Properties Sheet is already open for this view.%n
5385	1Please select a part site.%n
5386	1You have made a %s net capable of being changed by space etch.%n
5387	1There are no symbols assigned to that part.%n
5388	1The PC cannot be opened while the schematic is being edited.%n
5389	1The PC cannot be opened because the schematic cannot be accessed.%n
5390	1The reference designator %s has already been used.  The new part will have a reference designator of %s.%n
5391	1Only a part can be swapped with a part.%n
5392	1An existing part also has %s as its reference designator.%n
5393	1The connector named %s has %u fingers and the part with id %u has %u pins.%n
5394	1The PC Board conversion has been aborted.  Please fix the problems mentioned in the preceding error messages and try the conversion again.%n
5395	1There is no circle-shaped aperture with size: %u mils to correspond to etch rule: %u.  The last circle-shaped aperture with size: %u was substituted.%n
5396	1The default etch rule of net number %u is etch rule %u, which no longer exists in the Etch Rule Table.  If this etch rule is not re-added to the Etch Rule Table, the default will be changed to the last etch rule in the table when you next open the board.%n  
5397	1The routing between the points with coordinates (%d,%d) and (%d,%d) references etch rule %u, which no longer exists in the Etch Rule Table.  The routing will be deleted when you next open the board, if the etch rule is not re-added to the Etch Rule Table.%n  
5398	1A "no interior etch" rectangle is defined in the drawing, but the board has no interior signal layers.  The rectangle will be ignored.%n
5399	1A "no top etch" rectangle is defined in the drawing, but the top layer of the board is not a signal layer. The rectangle will be ignored.%n
5400	1A "no bottom etch" rectangle is defined in the drawing, but the bottom layer of the board is not a signal layer.  The rectangle will be ignored.%n 
9999	1This phony message is here so that the message utility won't run off the end of the file.%n