0	Netlist.msgs - last edit:  Henry Cate III	13-Jan-86 10:28:20
1	1Pin number missing for symbol %s.%n
2	1Design Data List tool is already open.%n
3	1Reading in schematic...%n
4	1done, but there are no nets in the design.%n
5	1done.%n
6	1Schematic has old format: please use the Schematic Tool to convert it.%n
7	1Problems on opening the Design File.%n
8	1Parts missing in the library. Close the file and see your system administrator to get the right library.%n
9	1Schematic is not of type binary.  Please see your System Administrator.%n
10	1Schematic not found.%n
11	1Reference designator not found.%n
12	1Pin number not assigned.%n
13	1Net name is truncated.%n
51	1Load aborted.%n
52	1Please click the left mouse button to confirm the Reset.%n
53	1Are you sure?%n
54	1Please specify the file name.%n
55	1No previous zone.%n
56	1This zone was not in the file, please use Reset to clear up the items.%n
60	1cannot open schematic.%n
61	1cover file not found.%n
62	1property dictionary version mismatch.%n
63	1Please specify the output file.%n
64	1done.%n
500	1Design Data List windows cannot be deactivated.%n
501	1%s is not available.%n
502	1%s is not a valid specification.%n
503	1%s problems encountered while reading specification %s.%n
504	1Specification name must have characters before ".sp".%n
505	1Please specify a Cover sheet file and try again.%n
506	1Currently looking at highest possible column.  Next not available.%n
507	1Currently looking at lowest possible column.  Previous not available.%n
508	1The end line character must be a single character.%n
509	1Cannot access system.lib.%n
510	1Could not access library %s.%n
511	1Checking the data in column %u...%n
512	1Column %u is valid.%n
513	1Column %u is invalid.%n
514	1Checking column %u against the report body data...%n
515	1Column %u agrees with the report body.%n
516	1Column %u doesn't agree with the report body.%n
517	1Schematic information could not be loaded.  Please close the Design Data Lists, fix any problems described above, and then try opening again.%n
1001	1%s is not an acceptable file name.%n
1002	1Could not find the file %s.%n
1003	1Please click the left mouse button to confirm closing the Formatter Tool.%n
1004	1Please click the left mouse button to confirm loading the Formatter Tool.%n
1005	1Please click the left mouse button to confirm erasing your edits.%n
1006	1Please click the left mouse button to confirm saving your edits.%n
1007	1Please click the left mouse button to confirm loading the cover sheet.%n
1008	1Please click the left mouse button to confirm saving the report body.%n
1009	1Please click the left mouse button to confirm saving the page specification.%n
1010	1The Data Extractor is already open for this folder.%n
1011	1The Data Extractor cannot be deactivated.%n
1012	1The specification file must end with ".sp".%n
1013	1The page header has %u lines of text.  It should be on less than %u.%n
1014	1The Characters per line must be greater than 0.%n
1015	1The maximum number of Lines on each page is 70.%n
1016	1The maximum number of Characters per line is 80.%n
1017	1The page header text is unacceptable.%n
1018	1The cover page text is unacceptable.%n
1019	1The start position of column %u must be greater than 0.%n
1020	1The start position of column %u is still the default value.%n
1021	1The width of column %u must be greater than zero.%n
1022	1The width of column %u is still the default value.%n
1023	1%n
1024	1The tally start position of column %u must be greater than 0.%n
1025	1The tally position of column %u is still the default value.%n
1026	1The tally width of column %u must be greater than zero.%n
1027	1The tally width of column %u is still the default value.%n
1028	1The tally ending position in column %u needs to be less than %u.%n
1029	1The property name list in column %u cannot be parsed.%n
1030	1%s is not a valid facet:property pair in the dictionary.  The facet doesn't exist.%n
1031	1%s is not a valid facet:property pair in the dictionary.  The property doesn't exist.%n
1032	1The field type list in column %u cannot be parsed.%n
1033	1The field width in column %u is greath than the column width.%n
1034	1%sColumn %u overlaps column %u at position %u.%n
1035	1Reading the specification file...
1036	1Reading the schematic data...
1037	1sorting the data...
1038	1outputting the data...
1039	1cannot access the schematic...
1040	1the schematic does not have a dictionary...
1041	1cannot find the library...
1042	1Couldn't find %s. Found %s.%n
1043	1In column %u the tally starts before the start of the column.%n
1044	1In column %u the tally starts beyond the end of the column.%n
1045	1Was expecting a special character in front of %s.%n
1046	1The qualifier, %s, is bad.%n
1047	1In column %u, the pin qualifier, %s, is bad.%n
1048	1Please indicate the Specification name and try again.%n
1049	1No library name specified.%n
1050	1The library name must have characters before ".lib".%n
1051	1The library name, %s, needs ".lib" at the end.%n
1052	1Please click the left mouse button to confirm using system.lib as the library.%n
1053	1The page specification in not consistent.%n
1054	1The property name(s) are not consistent.%n
1055	1The qualifiers are bad.%n
1056	1The column data is not consistent.%n
1057	1Column %u is inconsistent.%n
1058	1Column %u is an empty column.%n
1059	1Checking the data in the %s...%n
1060	1No dictionary found, so can not check dictionary related information in %s.%n
1061	1The %s data is invalid.%n
1062	1The %s data is valid.%n
1063	1The column %u ending tally column position must be less than %u.%n
1064	1Checking the consistency of data across sections...%n
1065	1The field width of column %u is still the default value.%n
1066	1The field width of column %u is greater than the column width, %u.%n
1067	1The start position of %scolumn %u is beyond the characters per line.%n
1068	1The width of %scolumn %u is more than the characters per line.%n
1069	1The end of %scolumn %u is beyond the characters per line.%n
1070	1The field width in column %u is zero.%n
1071	1The field width in column %u is still the default value.%n
1072	1Can not sort on column %u, the highest is %u.%n
1073	1Can not sort on column %u, it has the default values.%n
1075	1The data is %sconsistent across sections.%n
1076	1In column %u the field type %s is not consistent with the extraction algorithem.%n
1077	1Can not have a field type of %s.%n
1078	1The field type string in column %u is empty.%n
1079	1%n
1080	1Don't have enough room for column %u, only enough room for %u columns.%n
1081	1Only had enough room for %u out of the %u columns.%n
1082	1Please indicate the output file name and try again.%n
1083	1Not enough room to store at %u, storing at %u instead.%n
1084	1Library %s does not have a dictionary.  Please click the left mouse button to confirm looking in system.lib for a dictionary.%n
1085	1System.lib does not have a dictionary.%n
1086	1Could not find a dictionary for %s.%n
1087	1In column %u the property name delimiter "%s", is not equal to the field delimiter, "%s".%n
1088	1In column %u there are more property names than the field types.%n
1089	1In column %u there are more field types than the property names.%n
1090	1done.%n
1091	1aborted.%n
1092	1In column %u the length of the field delimiter is more than the field width.%n
1093	1In column %u the length of the field delimiter is the same of the field width.%n
1094	1In column %u the length of the field delimiter and the column together are more than the column width.%n
1095	1Please click the left mouse button to output only to the screen.%n
1096	1Writing specification %s...
1097	1Write aborted.%n
1098	1In column %u, property %s is %s type, not a %s type.%n
1099	1Was expecting a special character at the end of %s.%n
1100	1The %s does not have balanced "@".%n
1999	1This is to keep  MsgImpl from reading off the end of the file looking for the last message.