0	1Drafting.msgs - last edit: Nash    26-Feb-86 16:28:06
2000	1The angles between these two lines are %r, %r.%n
2001	1The angle of inclination between these points is %r.%n
2002	1Use the mouse to indicate the angle to be measured and the dimension text position.%n
2003	2The points defining this arc are: center:%p, start: %p, stop: %p.%n%e%e%e%e|The points defining this arc are: center: %p, start: %p, stop: %p, left: %p, right: %p, top: %p, and bottom: %p.%n
2004	1%s arc on layer %s has its center at %p, radius at %r, and goes from point %p (or %r) to %p (or %r), with an arc length of %r, at a scale of %r
2005	1Use the mouse to show the arrow's angle.%n
2006	1Use the mouse to show where you want the arrowhead.%n
2007	1These are improper grid parameters.%n
2008	1An error exists in the bounding box.%n
2009	2A breakline object was substituted.%e%e%n|A %s breakline object on layer %s was substituted for:%n
2010	2The circle's defining point is its center: %p.%n%e%e%e%e|The points defining this circle are: center: %p, left: %p, right: %p, top: %p, and bottom: %p.%n
2011	1%s circle on layer %s has its center at %p and a diameter of %r, with a circumference of %r, at a scale of %r.%n
2012	1Another serious conic bug.%n
2013	1%s ellipse on layer %s has its center at %p, a major radius of %r,%n	a minor radius of %r, at an angle of %r from %p to %p, at a scale of %r.%n
2014	2%eA hyperbola with center at %p.%n%e%e%e|A %s hyperbola has its center at %p, with its clockwise asymptote at angle %r,%n	its counter clockwise asymptote at angle %r and a slackness of %r.%n
2015	1The hyperbola's defining points are: center: %p, start: %p, stop: %p.%n
2016	2%e A parabola with center at %p.%n%e%e%e%e%e|A %s parabola%e has its center at %p, an axis angle of %r,%n	an axis scale of %r and goes from %p to %p.%n
2017	1The parabola's defining points are: center: %p, start: %p, stop: %p.%n
2018	1Copy bug.%n
2019	2The points defining this ellipse are: center: %p, start: %p, stop: %p.%n%e%e%e%e|The points defining this ellipse are: center: %p, start: %p, stop: %p, left: %p, right: %p, top: %p, and bottom: %p.%n
2020	1The dash pattern for %s line style (Pen No: %d) is: arg1: %d, arg2: %d, arg3: %d, arg4: %d, arg5: %d, arg6: %d,%n	with a thickness of %d.%n
2021	1%s dimension on layer %s, at a scale of %r.%n
2022	1The distance between the center of the curves is %r.%n
2023	1The distance between the line and the center of the curve is %r.%n
2024	1The distance between these two parallel lines is: %r.%n
2025	1The distance between the point and center of the curve is %r.%n
2026	1The distance between the point and the curve is %r.%n
2027	1The distance between the point and line is %r.%n
2028	1The distance between the two points is %r.%n
2029	1Page size: left: %r, right: %r, top: %r, bottom: %r.%n
2030	1Page size: %s.%n
2031	2The point defining this ellipse is: center: %p.%n%e%e%e%e|The points defining this ellipse are: center: %p, left: %p, right: %p, top: %p, and bottom: %p.%n
2032	1%s ellipse on layer %s has its center at point %p, with major radius of %r%n	and minor radius of %r, at a scale of %r.%n
2033	2The endpoints are too close together.%n%e%e|Arc at %p with radius of %r has endpoints that are too close together.%n
2034	2%s fill type.%n%e%e%e%e|The fill pattern for a %s fill type is: arg1: %d, arg2: %d, arg3: %d, arg4: %d,%n
2035	2%e%e%e%e|                                            arg5: %d, arg6: %d, arg7: %d, arg8: %d,%n
2036	2%e%e%e%e|                                            arg9: %d, arg10: %d, arg11: %d, arg12: %d,%n
2037	2%e%e%e%e|                                            arg13: %d, arg14: %d, arg15: %d, arg16: %d.%n
2038	2Finger number %s%e%e.%n|Finger number %s is located in connector %s on layer %s.%n
2039	2%s grid named %s.%n%e%e%e%e|%s grid named %s on layer %s has its origin at %p, with an X-spacing of %r%n	and a Y-spacing of %r.%n
2040	2Negative radii aren't allowed.%n|Improper ellipse parameter--negative radii aren't allowed.%n
2041	2Improper parabola.%n%e%e%e|Improper parabola is centered at %p, with an axis angle of %r, and scale of %r.%n
2042	1, %d
2043	1The intersection point is at %p.%n
2044	1The intersection points are:
2045	1The points defining this line are: start: %p, stop: %p.%n
2046	2%s%e line passes through points %p and %p.%e%e%e%e%n|%s line on layer %s starts at point %p and stops at point %p with angles to the horizontal %r, %r, with a length of %r, at a scale of %r.%n
2047	2%s%e line passes through points %p and %p.%n%e%e%e|%s line on layer %s, unlimited in both directions, passes through points %p and %p with angles to the horizontal %r, %r, at a scale of %r.%n
2048	2%s%e line passes through points %p and %p.%n%e%e%e|%s line on layer %s, unlimited in the start direction, passes through point %p and stops at point %p with angles to the horizontal %r, %r, at a scale of %r.%n
2049	2%s%e line passes through points %p and %p.%n%e%e%e|%s line on layer %s, unlimited in the stop direction, starts at point %p and passes through point %p with angles to the horizontal %r, %r, at a scale of %r.%n
2050	1%s has no properties.%n
2051	1This line and curve don't intersect.%n
2052	1These curves don't intersect.%n
2053	2The object(s) fall outside the drawing format.%n|The object(s) you created fall outside the drawing format; either delete them or modify your page size.%n
2054	1The page numbers for this drawing are: 
2055	1Part number %s on layer %s.%n
2056	1.%n
2057	1 %p,
2058	1This point is located at %p.%n
2059	2%ePoint at %e%p%e.%n|This %s point on layer %s is located at %p, at a scale of %r.%n
2060	2A %s filled area%e spans from %r to %r in X and %r to %r in Y.%e%n|%s filled area on layer %s spans from %r to %r in X and %r to %r in Y, at a scale of %r.%n
2061	1%s has the following properties:%n
2062	1                          %s  %s.%n
2063	2A line cannot be a single point.%n%e|A line cannot be a single point at %p.%n
2064	1Shape ID %s on layer %s.%n
2065	2Negative value disallowed.%n|A negative value appears in the Style command window; the earlier value was used.%n
2066	2Drawing number %s: author: %s.%e%e%e%n|The attributes of drawing named %s include: author: %s, number of elements: %d,%n	last edit date: %s, creation date: %s.%n
2067	1Use the mouse to indicate an angle from the center where the text should appear.%n
2068	1Use the mouse to show where the text should appear.%n
2069	1This text starts at %p.%n
2070	1This text field starts at %p.%n
2071	1A text field on layer %s located at %p rotated by angle %r has a width of %r and a height of %r. The %r %s text has contents "%s", at a scale of %r.%n
2072	1The text won't fit between extension lines.%n
2073	1A %r %s text on layer %s located at %p rotated by angle %r has contents "%s", at a scale of %r.%n
2074	1Use the mouse to indicate the side where the text should appear.%n
2075	1The text won't fit inside; use the mouse to indicate an outside location.%n
2076	2That unbounded object is not allowed.%n|You cannot create an unbounded object with the Forms Design feature on.%n
2077	2Outline is open.%n|This filled area outline is not closed.%n
2078	1Bad command index.%n
2079	1Bad text field in CreateTextField.%n
2080	2All edges must share a class.%n|All the edges of the text field box must share a class name.%n
2081	1%s not yet implemented.%n
2082	1All these lines must be orthogonal.%n
2083	2Use lines only for the box.%n|Use only lines when creating a text field bounding box.%n
2084	2Four sides required.%n|All text field bounding boxes must have four sides.%n
2085	1This filled area object is not allowed.%n
2086	1All unbounded arcs should be circles.%n
2087	1The system cannot unlimit this object.%n
2088	2Unknown object.%n|Unknown object--no description is possible.%n
2089	2Zero-radius arcs aren't permitted.%n%e|The arc at %p cannot have a radius of 0 or less.%n
2090	2Improper diameter.%n%e|The circle at %p cannot have a diameter of 0 or less.%n
2091	2%s written to disk.%n|%s has been written to the local disk.%n
2092	1converted to %s format... %s written to disk... 
2093	2%s written to disk.%n|%s has been written to the local disk.%n
2094	1The system created %s from %s.%n
2095	1Expert converted %s to IGES file %s.%n
2096	1%s has been written to the local disk.%n
2099	1Drawing text truncated to MaxChars.%n
2100	1%s is not in Expert format.%n
2101	1PFileImpl -- unknown object.%n
2102	1%s file has been read.%n
2103	1%s was not found.%n
2104	1This file contains a bad object.%n
2105	1The shape has been read.%n
2106	1Expert found no power layer.%n
2107	1Expert found no ground layer.%n
2109	1%s is not a valid real.%n
2110	1No drawings.%n
2111	1Testing %s with length = %r and rep. factor = %d  and line type = %s.%n
2112	1       RESULTS:      Total,    Overhead,   Drawing%n  Total time usec: %d       %d         %d%nAverage time used: %r     %r       %r%n   Inches per sec: %r                 %r%n
2113	1Expert found an improper text graphic object.%n
2114	1Design rules table: row #%d, column: #%d cannot be zero.%n
2115	1%s table is empty.%n
2116	1Aperture for etch #%d is not a valid aperture number.%n
2117	1Assign a name to layer #%d first.%n
2118	1Aperture table: aperture #%d must be bounded by a circle or a square.%n
2119	1The entry in Pad Stacks for Part Pins (Aperture to connect) Table:%n	 pad stack #%d, layer #%d should be blank.%n
2120	1Pad Stacks for Part Pins (Aperture to connect) Table:%n	pad stack #%d, layer #%d shows an incorrect aperture number (not found in the Aperture Table).%n
2121	1Pad Stacks for Part Pins (Aperture not to connect) Table:%n	pad stack #%d, layer #%d shows an incorrect aperture number (not found in the Aperture Table).%n
2122	1The entry in Pad Stacks for Part Pins (Aperture not to connect) Table:%n	pad stack #%d, layer #%d should be blank.%n
2123	1Pad Stacks for Vias (Aperture to connect) Table:%n	etch rule #%d, layer #%d shows an incorrect aperture number (not found in the Aperture Table).%n
2124	1The entry in Pad Stacks for Vias (Aperture to connect) Table:%n	 etch rule #%d, layer #%d should be blank.%n
2125	1Pad Stacks for Vias (Aperture not to connect) Table:%n	 etch rule #%d, layer #%d shows an incorrect aperture number (not found in the Aperture Table).%n
2126	1The entry in Pad Stacks for Vias (Aperture not to connect) Table:%n	 etch rule #%d, layer #%d should be blank.%n
2127	1The Trace Table and Clearance Table need the same number of etch rules.%n
2128	1The %s table must be dense.%n
2129	1The %s table entries cannot be zeroes.%n
2130	1A board requires at least one vertical and one horizontal layer.%n
2131	1There must be one etch rule in the Pad Stacks for Vias %n	(Aperture to connect) Table for each etch.%n
2132	1The row number is out of range [0..%d].%n
2133	1The Expert table is too large.%n
2134	1Wrong property.%n
2135	1Incorrect property.%n
2136	1Improper text field graphic object.%n
2137	1Specify a file name first.%n
2138	1Improper text.%n
2139	1Valid choices are missing.%n
2140	1Specify a class name first.%n
2141	1An argument is missing.%n
2142	1The text field is not bounded on the %s.%n
2143	1The offset value for that field places it outside its bounding box.%n
2144	1A text field cannot be placed on a line.%n
2145	1Unknown error--RaftImplA.Fail.%n
2146	1Rectangle error.%n
2147	1No box.%n
2148	1All clustered edges must share one style.%n
2149	1This edge is not associated.%n
2150	1The coordinates fall outside the board's bounding box.%n
2151	1That action doesn't apply to %s.%n
2152	1Select a point for this circle to pass through.%n
2153	1The object selected must be a point.%n
2155	1The point lies on the object.%n
2156	1Geometry bug.%n
2157	1The objects lie too far apart.%n
2159	1No circle.%n
2161	1No arc.%n
2162	1Use the mouse to select the arc's most clockwise point.%n
2163	1Use the mouse to select the center point.%n
2164	1Endpoints must be equidistant from the center.%n
2165	1Use the mouse to select the arc's starting point.%n
2167	1Use the mouse to select a circle to keep.%n
2168	1The selected object was not among those created; select again.%n
2169	1This action assumes that you issued a previous corner command.%n
2170	1The radius must be a positive value.%n
2171	1The length must be a positive value.%n
2172	1Select inside a quadrant.%n
2173	1No intersection occurs.%n
2174	1Improper corner request.%n
2175	1CommandImplC.Chamf - OOPS!!%n
2176	1You cannot unlimit this object.%n
2177	1You cannot unlimit a %s.%n
2178	1Not a tangent.%n
2179	1The system is constructing a line midway between the two parallel lines.%n
2180	1The fillet radius is too large.%n
2181	1No intersection point exists.%n
2182	1There are too many intersection points here to create them all.%n
2184	1You cannot trim a circle with one intersection point.%n
2185	1There are not enough labels.%n
2186	1You checked for this earlier.%n
2187	1There are more than two intersection points per object.%n
2188	1There is no intersection point with one of the objects.%n
2189	1Unknown type for %s.%n
2190	1No choices exist.%n
2191	1Use the mouse to select the approximate midpoint of the interval you wish to keep.%n
2192	1The starting and stopping points may not coincide for this command.%n
2193	1The label selection does not cover ref.%n
2194	1The system canceled the request, since the line would disappear.%n
2195	1The interval defined by the objects is too small.%n
2197	1%s bug.%n
2198	1This action required an illegal object.  All legal objects have been created.%n
2199	1The system cannot trim that kind of object.%n
2200	1The text is off the arc.%n
2201	1That's a leaky box.%n
2202	1This dimension is too close to the angle origin.%n
2203	1The curved arrow is too short.%n
2204	1Improper text justification.%n
2205	1Select an endpoint, the center point or a tangent point on the object.%n
2206	1Select an endpoint, the center point or a tangent point on either object.%n
2207	1The system cannot tell which object the point is on; try another object.%n
2208	1Select an endpoint, the center point or a tangent point on the other object.%n
2209	1You cannot apply linear dimensions to an unbounded line.%n
2210	1Select a line parallel to the desired dimension angle.%n
2211	1The selected object must be a line; try again.%n
2212	1Choose a point on the object.%n
2213	1Improper part.%n
2214	1That action isn't allowed here.%n
2215	1The note was created before Release 1.5 and cannot be changed.%n
2216	1DimImplB.DeduceBoxStyle failed.%n
2217	1This board is already valid.%n
2218	1Improper aperture number.%n
2219	1To validate a blank board, page number %d must be visible.%n
2221	1%s is not closed.%n
2222	1Check for an improperly created finger or a duplicate finger number: %s%n	in connector %s.%n
2223	1%s does not exist.%n
2224	1%s extends outside the board outline.%n
2225	1A part location extends outside the placement area.%n
2226	1A channel extends outside the placement area.%n
2227	1No %s grid exists.%n
2228	1This board is valid.%n
2229	1This is not a closed, clustered rectangle.%n
2230	1The rectangle's lines must share one line style.%n
2232	1The selection must be either one cluster or no clusters at all.%n
2233	1Bad object.%n
2234	1That is the wrong selection for making a finger.%n
2239	1Bad .df file.%n
2240	1This channel is not orthogonal; delete and recreate it.%n
2241	1This channel is not a line.%n
2243	1Expert requires lines and arcs in the board outline.%n
2244	1This object has no center.%n
2245	1The two circles are equal.%n
2246	1The two lines are equal.%n
2247	1Closest point should not have been called.%n
2248	1Closest line should not have been called.%n
2249	1No tangent circle exists.%n
2250	1Both points must lie on the same side of the line.%n
2251	2Concentric circles.%n|The circles are concentric.%n
2252	1The points are too close together.%n
2253	1The two circles overlap.%n
2254	1No tangent lines exist.%n
2255	1You cannot perform this action as requested.%n
2256	1There are too many lines tangent to 3 circles to create them all.%n
2257	1First argument may not be a pseudo-point.%n
2258	1GeometryImplB.Circle3Points-data corruption!%n
2259	1The center is not equidistant from the two parallel lines; no solution exists.%n
2260	1No solution exists.%n
2261	1The scale coefficient is wrong.%n
2262	1Bad point.%n
2263	1The midpoint is undefined for an unbounded line.%n
2264	1Endpoints are undefined for an unbounded line.%n
2265	1Select an endpoint from which to measure the length.%n
2266	1No points?%n
2267	1The intersection request handles only two or three trajectories.%n
2268	1These trajectories don't intersect.%n
2269	1The point must be on the trajectory.%n
2270	1Bad line.%n
2271	1The points you indicate are too close together.%n
2272	1No tangent line exists.%n
2273	1These are concentric curves.%n
2274	2Making photoplot drawings.%e%n|Expert is making photoplot drawings for %s.%n
2275	2Making checkplot.%e%n|Expert is making a checkplot for %s.%n
2277	1The system found an inadmissible zero-length etch.%n
2278	1The system found an etch with an illegal layer.%n
2279	2Expert encountered incompletes.%e%e%n|The system found %d global incompletes and %d etch incompletes.%n
2280	1The system cannot find the intersection of %s.%n
2281	1AlongObject takes only one object as a selection.%n
2282	1The point is not on the object.%n
2283	1You cannot go along a point.%n
2284	1The test for a point on %s is not yet implemented.%n
2285	1The distance between %s feature is not yet implemented.%n
2286	1There is no midpoint for %s.%n
2287	1There are no endpoints for %s.%n
2288	1There are no endpoints for %s unbounded both ways.%n
2289	1There are too many endpoints in %s.%n
2290	1You cannot make a line tangent to %s.%n
2291	1You cannot find a tangent circle for %s.%n
2292	1This operation is undefined.%n
2293	1The selected point cannot be the circle's center.%n
2294	1There is no tangent to a point.%n
2295	1The system was unable to open the IGES input file - %s.%n
2296	1%s truncated to 80 characters.%n
2298	1Entity number mismatch %s.%n
2305	1Unknown entity type in the Expert file.%n
2306	1The system cannot open %s.%n
2307	1Model 6000 does not support the %s code.%n
2308	1Model 6000 only supports linear interpolation.%n
2309	1Only model 4000 supports the %s code.%n
2311	1Use the mouse to indicate on which side of the profile the image is to be generated.%n
2312	1Indefinite location selected. Please try again.%n
2313	1These objects are not yet implemented by this command.%n
2314	1There is a break or branch in profile contiguity.%n
2315	1You are trying to trim to the center.%n
2316	1Image offset value is too large.%n
2317	1Image Profile only one circle. Other objects, including another circle, cannot be selected.%n
2318	1Zero value is not allowed.%n
2319	1Grid spacing less than %r is not allowed.%n
2320	1Object selected to start image is not contiguous with selected profile.%n
2321	1Cannot use this command for unlimited lines.%n
2331	1Box on layer %s at %p with Height %r and Width %r, at a scale of %r.%n
2332	1The corner points of this Box are: %p,  %p,%n	 %p,  %p.%n
2333	1Rectangle cannot be constructed.%n
2334	1Select a point for the object(s) to stretch to.%n
2335	1Select a point on the object to be stretched, e.g an endpoint, a middle point (for middle area stretch) or a point on the circumference of a circle.%n
2336	1Select point on circumference which needs to be displaced.%n
2337	1The object must be selected, try again.%n
2338	1The object must not be selected, try again.%n
2339	1This will no longer be a box but a collection of clustered lines.%n
2340	1Stretch applies to an arc, a circle, or line(s) only.%n
2341	1You cannot create an object with all dimensions zero.%n
2342	1The distance between the line and the circumference of the circle is %r.%n
2343	1%n                    Graphics frame properties or Document properties has an argument(s) which is too large.%n
2344	1Illustration for %s, page: %d... 
2345	1valid illustrator operations.%n
2346	1Write protection status not defined for this command.%n
2347	1The following properties have been added to all the selections.%n
2348	1                          Property %s can not be added since it has no value.%n
2349	1The following properties have been deleted from all the current selections.%n 
2350	1Expert has redefined only the %s pattern of the linestyle (or area style).%nThe %s pattern was not changed and must be altered separately.%n
2351	1Lines with zero or negative widths not allowed.%n
2361	1That action requires special access; see your System Administrator.%n
2362	1The pins must be numbered consecutively beginning at 1.  Pin %d is the highest numbered pin selected, and the following pin(s) are missing from the selection: #%s.%n
2363	1Drawing place is bad.%n
2364	1Place route file has old format; please convert.%n
2366	1You cannot project dimensions.%n
2367	1Isometric rotate bug.%n
2368	1Layer number %d is not a valid layer.  Found in the Show Traces Table, row %d.%n
2369	1Layer number %d is not a valid layer.  Found in the Show Design Rule Violation Etch Table, row %d.%n
2370	1Layer number %d is not a valid layer.  Found in the Show Pads Table, row %d.%n
2371	1Incorrectly formatted dimension object(s) were found on this page. The geometry and text has been clustered and left selected.%n
2372	1Cannot have more than 8 text fields in a dimension note.%n
2373	1Cannot have more than 4 text fields in a partitioned circle note.%n
2374	1You cannot project this object.%n
2375	1the plotter is offline... 
2376	1There are already sixteen scales in this drawing.%n
2377	1This operation is not valid for all layers.%n
2378	1Another layer already exists with that name.%n
2379	1Can not delete all layers.%n
2380	1Can not delete the current layer.%n
2381	1Layer %s %s protected, %s visible and has a color of %s.%n
2382	1This layer still contains objects.%n
2383	1Can not put objects on a protected layer.%n
2384	1The selection must be on the same layer.%n
2385	1The selection must be at the same scale.%n
2386	1Invisble objects have been created.%n
2387	1Open triangle on layer %s has its head at %p, and tails at %p and %p, at a scale of %r.%n
2388	1Outline triangle on layer %s has its head at %p, and tails at %p and %p, at a scale of %r.%n
2389	1%s filled triangle on layer %s has its head at %p, and tails at %p and %p, at a scale of %r.%n
2390	1Objects created are invisible in the current view.%n
2391	1Objects created are on a protected layer.%n
2392	2Shape %u not found.%n|Shape %u was not found in the library.%n
2393	1Use the mouse to write the new shape.%n
2394	1Use the mouse to overwrite the old shape.%n
2395	1You have more than one point selected.  You may only create one part pin at a time.%n
2396	1You have not yet selected a point representing a pin.%n
2397	1Validating the part...checking identification...
2398	1checking geometry...
2399	1Writing the part to %s...
2400	1Part ID %u has been successfully written to %s.  Its associated silkscreen ID is %u.  Its associated part shape ID is %u.%n
2401	1acquiring %s...
2402	1Pin number one must be placed at the origin (0,0).%n
2403	1You have more than one pin selected.  You may only read one part pin at a time.%n
2404	1A part must have either a silkscreen or a part shape.%n
2405	1Pin identified as: %s is outside its part bounding box.%n
2406	1This operation would require more than %u scales in this drawing.%n
2407	1This operation would require more than %u layers in this drawing.%n
2408	1Cannot open the library %s.%n
2409	1Display bug encountered in line display code.%n
2410	1Cannot read a part of id %u.%n
2411	1Cannot read a shape of id %u.%n
2412	1Cannot write a part of id %u.%n
2413	1Cannot write a shape of id %u.%n
2414	1The lines making up the bounding box of a part cannot have unbounded endpoints.%n
2415	1Nothing selected will permit projection.%n
2416	1invalid page number... 
2417	1That page number is not available for this drawing.%n
2418	1the system cannot find this window... 
2419	1Multi-page plot files are not implemented; only one page of the file was written to disk.%n
2420	1Hold down the left mouse button while dragging.%n
2421	1Hold down the left mouse button while pivoting.%n
2422	1There is no such page for this drawing.%n
2423	1You cannot delete a page that is currently in a view.%n
2424	1The distance to (X,Y) for a hyperbola cannot be less than 0.02.%n
2425	1Distance from focal point to (X,Y) for a parabola cannot be less than 0.0001.%n
2426	1Try a different cutting object.%n
2427	1The system cannot trim to this object.%n
2428	1The system cannot create the requested filled area.%n
2429	1You cannot zoom by a factor of zero.%n
2430	1%s has %d objects.%n
2431	1A location pin is off the part grid.%n
2432	1You can't make an overview of the Commands window.%n
2433	2Select the new center point.%n|Use the mouse to select the new center point.%n
2434	2Version mismatch - convert your design and try again.%n|Your design has an old format.  Convert it to the new format and try again.%n
2435	1An aperture could not be found for etch of width %u.%n
2436	1%s extends outside the placement area.%n
2437	2Select a drawing to erase changes.%n|Position the cursor over a drawing and press the left mouse button to erase changes.%n
2438	2Select a view.%n|Position the cursor over a view and press the left mouse button.%n
2439	2Select a page.%n|Position the cursor over a page and press the left mouse button.%n
2440	2Select a drawing.%n|Position the cursor over a drawing and press the left mouse button.%n
2441	2File already exists.%e%n|The file %s already exists - choose another name.%n
2442	2You cannot destroy the last view of a drawing.%n|You cannot destroy the last view of a drawing - use the "Erase and close" command.%n
2443	2Select a view to save changes.%n|Position the cursor over a view and press the left mouse button to save changes.%n
2444	1Expert found an improper conic graphic object.%n
2445	1Could not validate the part.%n
2446	1Cannot update the packaging rules that reference the part.%n
2447	1You cannot deactivate a Drafting window - use the Destroy view command.%n
2448	1Cannot update the abbreviation map.%n
2449	2IGES text too big.%n|IGES text is too big - using 50 inch text instead.%n
2450	1Shape with ID %u on layer %s.%n
2451	1Component shape with ID %u on layer %s.%n
2452	1Mechanical library part with ID %u on layer %s.%n
2453	1The hyperbola's defining points are: center: %p, start: %p.%n
2454	1The hyperbola's defining points are: center: %p, stop: %p.%n
2455	1The hyperbola's defining point is: center: %p.%n
2456	1The parabola's defining points are: center: %p, start: %p.%n
2457	1The parabola's defining points are: center: %p, stop: %p.%n
2458	1The parabola's defining point is: center: %p.%n
2459	1Clustered objects cannot be cornered.%n
2460	1%d
2461	1PlotGKSConic called with a non-conic.%n
2462	1Extreme not between start and stop point of conic.%n
2463	1Eccentricity is not within valid range.%n
2464	1Incorrect number of break points for an ellipse.%n
2465	1Unable to find quadrant for conic endpoint.%n
2466	1Unrecognized %s object in object size calculation.%n
2467	1A drawing may not contain more than %d layers.%n
2468	1Unable to find plotter stream.%n
2469	1That method of output is not enabled.%n
2470	1A layer name may not have more than 32 characters. Please choose a shorter name.%n
2481	1Your Expert disk is full. Delete unneeded files and try again.%n
2482	1Cannot create a pin with no name.%n
2483	1The selection for a shape must be contained in a box +- %r.  This object extends outside of that box.%n
2508	2Confirm to write a new file.%e%n|%s doesn't exist yet; press the left mouse button to write the new file.%n
2509	2Confirm to overwrite the old file.%e%n|%s already exists; press the left mouse button to overwrite the old file.%n
2510	1There should be one etch rule for each etch in the Pad Stacks for Vias (Not to connect) Table.%n
2511	1The two Pad Stacks for Part Pins Tables must contain the same number of rows.%n
2512	1All site numbers must be numbered sequentially.%n
2513	2Point at %e%e%p%e.%n|This %s point on layer %s is located at %p, at a scale of %r.%n
2514	2The system found an error while reading the IGES file.%e%e%n|The system found an error while reading the IGES file: %s, %s.%n
2515	1The system found an IGES property without a corresponding graphic object.%n
2516	1You cannot change the board outline or grids when revalidating a board.%n
2517	1Connector %s cannot be changed; it has routing connected to it.%n
2518	2Too many styles in checkplot.%n|This checkplot needs too many different line and point styles; some will not appear correctly.%n
2519	2Too many styles in photoplot.%n|This photoplot needs too many different line and point styles; some will not appear correctly on your display, but film will not be affected.%n
2520	1Something is wrong with the blank library listing.%n
2521	1This command is not yet implemented for %s.%n
2522	1Click the left mouse button to continue.%n
2523	1Relative description completed.%n
2524	2Hold down left mouse button to create. Click right mouse button to terminate.%n|Hold down the left mouse button to create a rubberbanding line. Release to place the line. Repeat until done. Click the right mouse button to terminate.%n
2525	1The new page size is the extent of the finite geometry multiplied by a factor of %r.%n
2526	1Text fields on this page are now selectable.%n
2527	1The type-in string below has conflicting unit information. The arrow points near the problem.%n
2528	1The type-in string below is not a valid real number. The arrow points near the problem.%n
2529	1                          %s%n
2530	1The current index point is %p.%n
2531	1An ellipse with both radii so small cannot be created.%n
2532	1You cannot dissect clustered objects.%n
2533	1accelerators... 
2534	1aborted.%n
2535	1Checking parameters... 
2536	1sending plot... 
2537	1rotating drawing... 
2538	1Plot of %s, page: %d... 
2539	1valid plotting operations.%n
2540	1done.%n
2541	1Select an endpoint, the center point or an extreme point on the object.%n
2542	1Press and hold the left mouse button over one corner; then continue to hold it while drawing through to the opposite corner.%n
2543	1Area(s) without closed boundaries were found on this page. The boundaries have been clustered and left selected.%n
2544	1Use the mouse to select an arc to keep.%n
2545	1Reading page %d...%n
2546	1There are object(s) on this page that fall outside the drawing format. Either your page size is inappropriate or the objects should be deleted.%n
2547	1Page size: left: %r, right: %r, top: %r, bottom: %r. Page %d has been read.%n
2548	1Some of the dimension styles of the drawing read in are different from the previous settings. These settings have been updated to the values read in and are reflected in the Dimension and Tolerance style command windows.%n
2549	1Drawing will be captured at the indicated scale. Click the left mouse button to confirm; click the right mouse button to terminate... 
2550	1This length is too short and would produce an illegal object.%n
2551	1You cannot create a breakline from an unbounded line.%n
2552	1The range for this breakline is from %r to %r.%n
2553	1CommandImplD-Copy rejected this line.%n
2554	1This is not a breakline.%n
2555	1You cannot trim clustered objects.%n
2556	1You cannot dissect an unbounded line into equal pieces.%n
2557	1You cannot trim to a dimension.%n
2558	1Expert found no object.%n
2559	1Select one trajectory only when you trim to a cluster.%n
2560	1Use the mouse to select a segment to keep.%n
2561	1Use the mouse to select a fixed endpoint.%n
2562	1Use the mouse to select a cutting object.%n
2563	1There are too many intersection points; the system dissected only part of the selection.%n
2564	1That part is not found in your library.%n
2565	1There is no shape ID number.%n
2566	1%s falls out of the allowed range.%n
2567	1Select a point to represent a pin.%n
2568	1More than one point has been selected for the reference designator position.%n
2569	1This is not a shape ID number.%n
2570	1The part name is missing.%n
2571	1The ID number is missing.%n
2572	1The part number is missing.%n
2573	1The prefix is missing.%n
2574	1A prefix string can contain at most two characters.%n
2575	1Bad part object.%n
2576	1The selection contains too many points for a shape.%n
2577	1This is the wrong line style for a shape.%n
2578	1The selection contains is an inadmissible object for a shape.%n
2579	1That is the wrong selection for a shape.%n
2580	1One of the points you selected is not a pin.%n
2581	1That is the wrong selection for a part.%n
2582	1The bounding box must be a closed rectangle.%n
2583	1That object is inadmissible for a part.%n
2584	1No point has been selected for the reference designator position.%n
2585	1No footprint.%n
2586	1That is the wrong number of lines for a bounding box.%n
2587	1More than one of the selected pins has a number of %d. Duplicate pin numbers are not allowed.%n
2588	1Parts may contain only points and lines.%n
2590	1No pins.%n
2591	1There is no pin text on this pin.%n
2592	1Bad pin text.%n
2593	1Coordinate off part.%n
2594	1One of the pins has an out of range pin number. Pin numbers must be between 1 and 256, inclusive.%n
2595	1Lost site index in the pin text.%n
2596	1Lost swap code number in pin text.%n
2597	1Lost diameter in the pin text.%n
2598	1Lost pad stack in the pin text.%n
2599	1Bad shape number.%n
2600	1One of the ID fields is either blank or not a number.%n
2601	1Use the mouse to write the new part.%n
2602	1This part is already in the library.%n
2603	1Use the mouse to overwrite the old part.%n
2604	1This shape is valid.%n
2605	1This part is valid.%n
2606	1You've included a point without a pin number.%n
2607	1Bad part tag in library.%n
2608	1The part has been read.%n
2609	1The system cannot open %s.%n
2610	1The system cannot write an unknown object.%n
2611	1Division by zero is not allowed.%n
2612	1This object is not circular.%n
2613	1This object is not a filled area.%n
2614	1This filled area is not closed.%n
2615	1The current selection contains an object that is not valid as the boundary of a filled area.%n
2616	1Bad tag.%n
2618	1The unbounded point escaped being clipped.%n
2619	1The hyperbola has been broken into three.%n
2620	1Expert doesn't understand a negative parabola scale.%n
2621	1The parabola has been broken into three.%n
2622	1Break curve.%n
2623	1Two unbounded points passed to LineParameters.%n
2624	1Either the start or the stop point is off the conic.%n
2625	1Corrupt affine screen place record.%n
2626	1Clip to unbounded point.%n
2627	1Clip conic found too many segments.%n
2628	1Entry/exit overflow.%n
2629	1Unmatched entry and exit.%n
2630	1A point is not on a side of the box.%n
2631	1Damaged drawing file: %s.%n
2632	1The saved current page of a multi-page drawing is missing.%n	This drawing may be damaged.%n
2633	1You cannot destroy the last command window.%n
2634	1Commands not present!%n
2635	1%s.%n
2636	1Non-conic accelerators.%n
2637	1You left a text field selected; it has been deselected for you.%n
2638	1Type-in inconsistency.%n
2639	1Select the objects for cornering first.%n
2640	1That argument is not a number.%n
2641	1Form error: no argument was found.%n
2642	1Form error: no choices were found.%n
2643	1Form error: Choice was not recognized.%n
2644	1An argument is not set.%n
2645	1The command was not found.%n
2646	1No point.%n
2647	1Press the left mouse button to delete the field, the right to replicate it.%n
2648	1Fill-in called incorrectly.%n
2649	1Cannot set the current type in.%n
2650	1The objects selected are already %s.%n
2651	1You cannot cluster objects already in a cluster.%n
2652	1These objects are not clustered.%n
2653	1You cannot uncluster an area.%n
2654	1You cannot uncluster a dimension.%n
2655	1The selected objects must all form one cluster.%n
2656	1That is an unreasonable number of copies.%n
2657	1The number of copies must be greater than zero.%n
2658	1The length must be greater than zero.%n
2659	1A point is not a trajectory.%n
2660	1Wrong reference point.%n
2661	1You must use two parallel lines as references for an object-relative copy.%n
2662	1The two reference lines must be parallel.%n
2663	1You cannot copy an unknown object.%n
2664	1Use the mouse to select the trajectory.%n
2665	1Use the mouse to select the point to begin on the trajectory.%n
2666	1You must select a point.%n
2667	1Select the first reference object (a point, arc, circle, or the first of two parallel lines).%n
2668	1Select the second reference object (a point, arc, circle, or the second of two parallel lines).%n
2669	1Lost association.%n
2670	1You cannot delete the last replicate field without resetting the Forms Design feature.%n
2671	1Object-relative move are limited to a single window.%n
2672	1You cannot perform this kind of rotation on an ellipse.%n
2674	1You cannot rotate text.%n
2675	1You cannot select the grid.%n
2676	1You cannot rotate an unknown object.%n
2677	1The note was created before Release 1.5 and cannot be dragged.%n
2678	1Don't use this object as a trajectory.%n
2679	1Use the mouse to select a line.%n
2680	1An immovable object was destroyed.%n
2681	1Use the mouse to select a line around which to rotate.%n
2682	1You must select a line.%n
2683	1Use the mouse to select the pivot point.%n
2684	1Use the mouse to select the trajectory.%n
2685	1You must select a trajectory.%n
2686	1Use the mouse to select a reference point for the drag.%n
2687	1The object was not transformed.%n
2688	1The matrix does not represent rigid transformation.%n
2689	1That command is only valid with a selection.%n
2690	1Geometry error: %s.%n
2691	1Unknown command.%n
2692	1Invalid class.%n
2693	1Bad root.%n
2694	1Unknown object type.%n
2695	1You have selected a location in a view not related to the current view. Select with the cursor in the desired view before issuing the command.%n
2696	1Select with the mouse an object to which to trim.%n
2697	1Select an object in a drawing window.%n
2698	1The reference object must lie in a view of the same page. Try again.%n
2699	1You didn't select close enough to an object; try again.%n
2700	1That's the object you're trimming; select again.%n
2701	1No current grid.%n
2702	1Bad grid.%n
2703	1No grid by this name yet exists.%n
2704	1You cannot delete the normal grid.%n
2705	1You've already created the maximum number of axes.%n
2706	1no file names specified... 
2708	1The drawing already contains that page.%n
2709	1Negative page sizes are not allowed.%n
2710	1The drawing is too big.%n
2711	1Press and hold the left mouse button over one corner; then continue to hold it while drawing through to the opposite corner... 
2712	1Fill array bounds fault.%n
2713	1Conic dda in infinite loop.%n
2714	1Fill stack bug.%n
2715	1Unknown display bug.%n
2716	1Invalid grid type.%n
2717	1Bad line type for grid.%n
2718	1Bad filled area.%n
2719	1You cannot create filled areas from unbounded lines.%n
2720	1You've not specified a grid name.%n
2721	1You must select at least two objects for any relative description.%n
2722	1This is not a curve.%n
2723	1The angles for a hyperbola must not be either 0 or 180 degrees apart.%n
2724	1There is no point on one of the lines.%n
2725	1Degenerate conic.%n
2726	1Choosing a point not on either line is disallowed.%n
2727	1You cannot dimension %s.%n
2728	1You cannot place a text note on %s.%n
2729	1Please specify the text in the Forms and Properties window.%n
2730	1Select exactly one object.%n
2731	1The angular dimension command applies only to lines.%n
2732	1Illegal line.%n
2733	1These two lines are not perpendicular.%n
2734	1These lines do not intersect.%n
2735	1Improper chamfer.%n
2736	1Expert cannot carry out the rotation you've requested.%n
2737	1Pin names may be no longer than 15 characters.%n
2738	1You cannot intersect an object with itself.%n
2739	1Bad checkplot pad.%n
2743	1Expert cannot find a suitable aperture.%n
2744	1Bad shape aperture.%n
2746	1The system cannot open the parts library.%n
2747	1The system cannot open the design file.%n
2748	1The time stamps differ for the .pr file (%t) and the original board blank (%t).%n
2749	1Unknown drawing type.%n
2754	1The number of layers in the Layer Description Table for this drawing doesn't match the schematic.%n
2756	1Improper finger.%n
2757	1There is an improper text object in the finger.%n
2758	1There is an improper finger object in the finger.%n
2759	1There is more than one point in a shape.%n
2760	1There is an improper text object in the shape.%n
2761	1Improper via.%n
2763	1Improper etch.%n
2764	1Improper checkplot table.%n
2765	1Layer number %d could not be found in the Layer Table.%n
2766	2The system encountered null padstacks.%e%e%n|%d null padstacks out of %d.%n
2768	1This %s rectangle contains a nonorthogonal line.%n
2769	1This rectangle is not a finger.%n
2770	1This %s rectangle contains too many points.%n
2771	1This location rectangle is not on the part grid.%n
2772	1This %s rectangle requires a point.%n
2773	1Part name: %s, number: %s, ID: %u, silkscreen ID: %u, shape ID: %u.%n
2774	1Part box width: %d, height: %d.%n
2775	1Prefix: %s, pin count: %d.%n
2776	1Pin number: %s at %p, named: %s, swap code: %d, type: %s, site number: %d.%n
2777	1The via grid and the part grid must share the same origin.%n
2778	1That command applies to a maximum of %d objects.%n
2779	1The library is busy.  Close all of your documents and try again.%n
2780	1The auxiliary library %s is not present on the workstation's disk.%n
2781	1The system found an unknown library bug.%n
2782	1Select an endpoint.%n
2783	1Select the approximate position of the line you want to draw.%n
2784	1No route interior rectangles are not permitted for a two-layer board.%n
2786	1There are too many channels.%n
2788	1You cannot dimension this type of object.%n
2789	1The command was cancelled.%n
2790	1The lines are parallel; no angular dimension was given.%n
2791	1The selected point is too close to an intersection.%n
2792	1The dimension arc is not outside the selected lines.%n
2793	1You've indicated an ambiguous reference point.%n
2794	1The reference point not on the arc.%n
2795	1The reference point is not between the endpoints.%n
2796	2%s renamed.%n%e|%s renamed to %s.%n
2797	1Expert cannot carry out this circle command.%n
2798	1Expert cannot carry out this arc command.%n
2799	1The system doesn't recognize this accelerator command.%n
2800	1The system cannot perform this line operation.%n
2801	1Expert cannot operate on this drawing's text.%n
2802	1Expert cannot operate on this drawing's points.%n
2803	1This file was written with non-release software. Its format may not be supported later.%n
2804	1Unknown file version.%n
2805	1This action cannot be executed until there is a current view.%n
2806	1"%s" is a new value for this field. Use the left mouse button to confirm or the right mouse button to reject.%n
2807	1This command is not valid with only part of a cluster selected.  Please reselect.%n
2808	1TestBrokenAssocs fails.%n
2809	1The following files will be plotted: %s. Click the left mouse button to confirm, the right to abort... 
2810	1select a view... 
2811	1cannot find file list... 
2812	1incorrect format for the list of pages... 
2813	1No current view to determine scale.%n
2814	1Associativity check not defined for this command.%n
2815	1Page %d has been added to the drawing %s.%n
2816	2Data destructive operation. Confirm.%e%e%n|This operation is data destructive. All objects on page %d of drawing %s will be deleted. Click the left mouse button to confirm, the right to abort.%n
2817	2Page deleted.%e%e%n|Page %d of %s has been deleted.%n
2818	1Cannot invert a degenerate matrix.%n
2819	1Singular transformation. Object cannot be successfully transformed.%n
2820	1Arc to ellipse problem. Object cannot be successfully transformed.%n
2821	1Conic Transformation problem. Object cannot be successfully transformed.%n
2822	1Bad object for Image profile.%n
2850	1For plotting:%n
2851	1Board size is %r x %r. (max height by max width)%n
2852	1Board has %d horizontal channels.%n
2853	1Board has %d vertical channels.%n
2854	1Board has %d locations.%n
2855	1Board has %d no via areas.%n
2856	1Board has %d no route top areas.%n
2857	1Board has %d no route interior areas.%n
2858	1Board has %d no route bottom areas.%n
2859	1Connector %s has %d pins and all are (in/not in) sequence.%n
2860	1Board has a %s grid at origin %r, %r with x-spacing of %r and y-spacing of %r.%n
2861	1Board has %d layers.%n
2862	1You cannot project 90 degrees.%n
2863	1You cannot project this conic.%n
2864	1Board has %d no place areas.%n
2865	1Pad Stacks for Part Pins (Aperture not to connect) Table:%n	pad stack #%d, for solder entry shows an incorrect aperture number.%n
2866	1Pad Stacks for Part Pins (Aperture not to connect) Table:%n	pad stack #%d, for pad master entry shows an incorrect aperture number.%n
2867	1Pad Stacks for Vias (Aperture not to connect) Table:%n	etch rule #%d, for solder entry shows an incorrect aperture number.%n
2868	1Pad Stacks for Vias (Aperture not to connect) Table:%n	etch rule #%d, for pad master entry shows an incorrect aperture number.%n
2869	1Pad Stack #%d was not found in the Pad Stacks for Part Pins (Aperture to connect) Table.%n
2870	1Pad Stack #%d was not found in the Pad Stacks for Part Pins (Aperture not to connect) Table.%n
2871	1Etch rule #%d was not found in the Pad Stacks for Vias (Aperture to connect) Table.%n
2872	1Etch rule #%d was not found in the Pad Stacks for Vias (Aperture not to connect) Table.%n
2873	1Etch rule #%d was not found in the Trace Table.%n
2874	1This object has an aperture number not found in the Aperture Table.%n
2875	1Type-in error in the %s Table: %s %s.%n
2876	1Invalid table name.%n
2877	1%n%s plotted to the local disk.%n
2878	1Problems rotating this filled area.%n
2879	1This finger's via lies outside the placement area.%n
2880	1Select two points first.%n
2881	2Select a center point.%n|Use the mouse to select the ellipse's center point.%n
2882	1The selected points are too close together for this command.%n
2883	1The ellipse is too thin to construct.%n
2884	1No such ellipse exists.%n
2885	2A %s%e parabola with center at %p.%n%e%e%e|This %s parabola on layer %s has its center at %p, an axis angle of %r,%n	and a focal distance of %r. It has an unlimited start and an unlimited stop, at a scale of %r.%n
2886	2A %s%e parabola with center at %p.%n%e%e%e%e|This %s parabola on layer %s has its center at %p, an axis angle of %r,%n	and a focal distance of %r. It has an unlimited start and stops at %p, at a scale of %r.%n
2887	2A %s%e parabola with center at %p.%n%e%e%e%e|This %s parabola on layer %s has its center at %p, an axis angle of %r,%n	and a focal distance of %r. It starts at %p and has an unlimited stop, at a scale of %r.%n
2888	2A %s%e parabola with center at %p.%n%e%e%e%e%e|This %s parabola on layer %s has its center at %p, an axis angle of %r,%n	and a focal distance of %r. It starts at %p and stops at %p, at a scale of %r.%n
2889	2A %s%e hyperbola with center at %p.%n%e%e%e%e|This %s on layer %s hyperbola has its center at %p, with its clockwise asymptote at angle %r,%n	its counterclockwise asymptote at angle %r, and a slackness of %r. It has an unlimited start and an unlimited stop, at a scale of %r.%n
2890	2A %s%e hyperbola with center at %p.%n%e%e%e%e%e|This %s on layer %s  hyperbola has its center at %p, with its clockwise asymptote at angle %r,%n	its counterclockwise asymptote at angle %r and a slackness of %r. It has an unlimited start and stops at %p, at a scale of %r.%n
2891	2A %s%e hyperbola with center at %p.%n%e%e%e%e%e|This %s on layer %s hyperbola has its center at %p, with its clockwise asymptote at angle %r,%n	its counterclockwise asymptote at angle %r and a slackness of %r. It starts at %p and has an unlimited stop, at a scale of %r.%n
2892	2A %s%e hyperbola with center at %p.%n%e%e%e%e%e%e|This %s on layer %s hyperbola has its center at %p, with its clockwise asymptote at angle %r,%n	its counterclockwise asymptote at angle %r and a slackness of %r. It starts at %p and stops at %p, at a scale of %r.%n
2893	1Select with the mouse the first cutting object near the new starting point.%n
2894	1Select with the mouse the second cutting object near the new stopping point.%n
2895	1The current grid is too finely spaced to be displayed at the zoom factor of at least one of the views of this drawing.%n
2896	1The system cancelled the request, since the hyperbola would disappear.%n
2897	1The system cancelled the request, since the parabola would disappear.%n
2898	1This trim would cause the object to close.%n
2929	1Invalid aperture number. Object not plotted.%n
2930	1Insufficient space on disk for sorting. Plot generated unsorted.%n
2931	1Processing library Ids... 
2932	1this listing will contain %d parts.%n
2933	1This library is too large to do a complete listing. A partial listing will be generated.%n
2934	1Unable to acquire text file for writing.%n
2935	1The condition number for this transformation is %r.%n
2936	1The condition number, %r, for this transformation is too large.%n
2937	1Unable to convert arc.%n
2938	1Unable to convert conic.%n
2939	1This command requires an active view.%n
2940	1This gerber file will be generated at the indicated scale which is DIFFERENT from 1.0... 
2959	1Validating %s. Click the left mouse button to confirm, the right to abort.%n
2989	1DisplayShapes must be called with the silkscreen or part shape visible.%n
2990	1Pin enumerator called with something other than a point.%n
2991	1Two special clusters have been found to be clustered together.  The special objects have been destroyed and their geometry left as a simple cluster.%n
2992	1Shape ID %u has been successfully written to %s.%n
2993	1Cannot do a detail at scale between parallel lines.%n
2994	1Select the first reference object (a point, arc or a circle).%n
2995	1Select the second reference object (a point, arc or a circle).%n
3201	1IGES to Expert conversion... 
3202	1clipping planes are defined for this view... %n
3203	1process view #%d on page #%d at coordinate X: %r Y: %r... %n
3204	1add page %d for next drawing... 
3205	1process drawing annotations... 
3206	1System ID = %s, units = %s, model scale = %r%n
3207	1Real number %s has been rounded off to zero.%n
3208	1Real number %s too large. Replaced by: %s%n
3209	1Non-unit vector found in transformation matrix %s%n
3210	1Expert text string "%s" contains characters from two different IGES symbol fonts.%n
3211	1The system found %d IGES entities which were completely outside the viewing box.%n