0 Schematics.msgs - last edit: Tucker 11-Feb-86 11:48:48 1000 1The dictionary associated with this schematic is bad and missing a system property.%n 1450 1The Source Marker and Destination Marker aren't on the same page!%n 1451 1Selection by box only allowed on the page containing the source and destination markers!%n 1452 1The symbol does not have any definition.%n 1453 1This view is now on the first page of the symbol's definition.%n 1454 1Edit the path in a view that contains the selection.%n 1455 1IMPLEMENTATION INCONSISTENCY DETECTED!%n 1456 1Nothing has been selected.%n 1457 1Too many elements selected.%n 1458 1Selection is not a component.%n 1459 1Selection is not a junction.%n 1460 1Selection is not a net.%n 1461 1Selection is not a pin.%n 1462 1Selection is not text.%n 1464 1Selected text is a valid id but is not defined in the library!%n 1465 1Selected text is a defined but invalid id.%n 1466 1No shape exists for this schematic's grid & template.%n 1467 1Selected text is a valid id, but is not a logic symbol.%n 1468 1Must select multiple items to create cluster.%n 1469 1Some of selected items in old clusters. Deleted from old clusters.%n 1470 1After removable of that element, only one item remained in the cluster. The one item cluster has been deleted.%n 1471 1Selected item not contained in any clusters.%n 1472 1Property Sheet is unavailable when there is no selection.%n 1474 1Property Sheet is unavailable during Add To Selection.%n 1475 1Last page that will be expanded is %u.%n 1476 1The schematic appears to have been previously expanded.%n 1477 1, page %u to page %u 1478 1Copying pages containing hierarchy that will be expanded.%n 1479 1Page %u to page %u 1480 1.%n 1481 1Beginning expansion...%n 1482 1There is no hierarchy to expand.%n 1483 1...expansion complete.%n 1484 1The expansion on page %u includes a connectivity symbol which references pin %s, but that pin is not on any net in the hierarchical symbol.%n 1485 1ExpandPage: nextFreePage is %u, expansionDepth is %u.%n 1486 1Copying page %u to page %u and expanding.%n 1487 1Missing suffix found on new page %u; continuing...%n 1488 1Suffix with non-numeric characters found on new page %u; continuing...%n 1489 1No match for pin %s found while expanding symbol %u from page %u. I suggest that you check the schematic carefully, as any nets attached to this pin may have been lost.%n 1490 1Removing definition at depth %u 1491 1...components 1492 1...lines 1493 1...text 1494 1...netChunks 1495 1...components (again) 1496 1...done.%n 1497 1Fix up nets: %u.%n 1498 1Note that the pin name %s is negated. The proper match for a negated name is the pin name followed by a "\". You may wish to erase these changes and start the Expand hierarchy command again.%n 1499 1...deleting netChunk 1500 1...replacing with logical connectors 1501 1...deleting definition 1502 1Selection is empty.%n 1503 1Buses on definition pages cannot have logical connectors. A bus on page %u contains a logical connector.%n 1508 1Selection may not span multiple pages; operation aborted.%n 1509 1Bus pins created in the library are not allowed on a symbol to be expanded. Symbol %u on page %u has bus pins.%n 1515 1Coordinate matches last coordinate specified. Ignored.%n 1519 1Finish the present operation before bringing up Schematic Tool Properties!%n 1520 1You must close the existing Schematic Tool Properties window first!%n 1521 1You must close the existing Output Options window first!%n 1522 1Probing the network for output servers... 1523 1 no servers responded!%n 1524 1 done.%n 1525 1Drawing dimensions incorrectly specified.%n 1526 1You aren't editing the schematic so the property grid, drawing size, discrete device parameters, and font items are not modifiable.%n 1527 1You aren't editing the schematic so the page id and property grid items are not modifiable.%n 1528 1%u symbols replaced on loading. Read aborted.%n 1529 1Schematic does not appear to match library. Please see your System Administrator.%n 1531 1Cannot Apply the property sheet with zero length text string.%n 1532 1Specified format is not yet implemented.%n 1533 1done.%n 1535 1Please specify an output server.%n 1537 1This window cannot be deactivated.%n 1538 1Formatting... 1542 1Click the left mouse button to confirm.%n 1544 1save changes and close 1545 1The backwards slash(/) cannot be placed at the end of the net name since it is used in the net list to represent negated nets.%n 1546 1Aborted by user.%n 1547 1...aborted by user.%n 1556 1Outputting schematic... 1559 1Encountered instance of symbol %u on page %u which has pin %u connected to net (name: %s, number: %u), but 1560 1pin %u is now at that position.%n 1561 1Click the left mouse button to confirm connecting the net to pin %u, click the right mouse button to leave the pin and net inconsistent.%n 1562 1there is no longer a pin at that position. Continuing...%n 1563 1%u connections to symbol pins inconsistent with current library. Review your message window (scroll back, as necessary). Expert has encountered the problems listed while opening your schematic. Fix these problems before continuing.%n 1564 1%u connections to symbol pins switched to match current library. Schematic must be edited and saved to retain these updates.%n 1565 1Verifying that pin and net positions are consistent... 1566 1pins and nets are consistent.%n 1567 1Schematic is too large to fit in specified graphics frame.%n 1568 1Must set scale to %s for the schematic to fit.%n 1569 1Schematic cannot be scaled to fit in graphics frame.%n 1570 1Unnamed nets cannot be negated.%n 1572 1You cannot plot to the indicated device.%n 1573 1Desired page does not represent a valid page number.%n 1574 1Bus pin encountered in schematic. Not supported by Place and Route package.%n 1575 1Saving schematic changes...pages... 1576 1...problems encountered. Updates not saved.%n 1577 1...done.%n 1578 1Erasing schematic changes...pages... 1579 1...problems encountered. Updates not erased.%n 1580 1Could not find symbol in schematic.%n 1581 1Could not find information on symbol to update in schematic.%n 1582 1The schematic cannot be edited while the board from the same folder is open.%n 1583 1The indicated page cannot be plotted since it isn't in the schematic.%n 1584 1The library cannot be changed when a schematic that references it is in the middle of an operation. Please complete the operation before proceeding.%n 1585 1A symbol cannot be changed when a schematic has a property sheet up for that symbol. Please close your Logic Symbol Properties sheet before proceeding.%n 1586 1page %u... 1587 1The drawing is too large for the specified device. Please decrease the scale and try again.%n 1588 1rotating drawing... 1589 1You must close the existing Schematic Display Properties window first.%n 1590 1You must close the existing Schematic Properties window first.%n 1591 1You cannot use Previous while working with the schematic format.%n 1592 1You cannot use Next while working with the schematic format.%n 1593 1You cannot use Previous while working with the first page of the design.%n 1594 1You cannot use Next while working with the last page of the design.%n 1595 1You aren't editing the schematic so the page information is not modifiable.%n 1596 1You aren't editing the schematic so the schematic information is not modifiable.%n 1597 1You don't have format access so the schematic format information is not modifiable.%n 1598 1You cannot move object properties across pages or schematics.%n 1599 1The copy must terminate in a schematic which is editable. Please try the copy again.%n 1600 1Conflicting logic uniqueness designators exist: 1601 1 %s 1602 1; hence page continues to define the OLD id.%n 1603 1The Symbol Designator must have at most %u characters.%n 1604 1Another symbol in your design is designated as: %s.%n 1605 1Click the left mouse button to confirm 1606 1Old connection is still using connection number %u.%n 1607 1using the first unused connection number, %u.%n 1609 1Connection number is being set to 32767.%n 1610 1using this default value.%n 1611 1Connection number is being set to 0.%n 1612 1using this value.%n 1613 1merging the connection named %s into the connection named %s.%n 1614 1merging this connection piece into the existing connection named %s.%n 1615 1Must apply to whole connection to change connection number without changing name.%n 1616 1Schematic has an unnamed connection which already uses connection number %u.%n 1617 1Schematic has a connection named %s which already uses connection number %u.%n 1618 1using the first unused connection number, %u.%n 1619 1The connection named %s already uses connection number %u.%n 1620 1There is already a connection named %s but its connection number is %u.%n 1621 1merging these connections.%n 1622 1merging this connection piece into the existing connection.%n 1623 1There is already a connection named %s in the schematic, with connection number %u.%n 1624 1There is also a connection numbered %u in the schematic, with connection name %s.%n 1625 1There is also a connection numbered %u in the schematic, that is unnamed.%n 1629 1There is another connection numbered %u that does not have any connectivity symbols,%n and the connection to be changed does not have any connectivity symbols.%n 1630 1There is another connection numbered %u that does not have any connectivity symbols.%n 1631 1There is another connection numbered %u, and the connection to be changed does not have any connectivity symbols.%n 1632 1Please specify the connection information in the property sheet.%n 1633 1A bus cannot have a width of 1. Please specify a larger width or abort the connection property sheet.%n 1634 1The bus connector slant from the property sheet is not used for a pause bus command that extends the old bus.%n 1635 1New line numbers can only be specified if a smaller bus is being created. You can create a smaller bus here by specifying the required line numbers in the "Lines" field.%n 1636 1Buses must have a width of at least 2.%n 1637 1You cannot have duplicate line numbers on a bus.%n 1642 1Selection is not in a schematic!%n 1643 1The last item you deleted was not from the schematic.%n 1644 1You cannot paste items from another schematic.%n 1645 1You've already pasted the last items you deleted.%n 1646 1The net number and net name have been changed.%n 1647 1The deleted net could not be reinserted because the attached symbols have been changed.%n 1648 1A net in the deleted data could not be reinserted into the schematic.%n 1649 1The deleted data cannot be restored!%n 1650 1Requested operation cannot be attempted until current operation is completed.%n 1651 1The schematic has not yet been made editable.%n 1652 1%n 1653 1Source marker cannot be moved manually during replay.%n 1654 1Destination marker cannot be moved manually during replay.%n 1655 1No operation to AGAIN.%n 1656 1Unexpected replay step encountered. No action taken.%n 1657 1Unexpected Selection. Replay step ignored.%n 1658 1Replay is complete.%n 1659 1Symbol was not found in the schematic.%n 1660 1Net was not found in the schematic.%n 1661 1Pin was not found in the schematic.%n 1662 1The schematic is not open. Please open the schematic and try again.%n 1663 1The schematic is locked. Please finish any schematic operations and verify the schematic has a valid library.%n 1664 1Replay step did not succeed.%n 1665 1You cannot delete critical connectivity symbols.%n 1666 1Selection operation not yet implemented.%n 1667 1Interchange file cannot be output while the schematic is being edited.%n 1668 1Ascii dump file %s created.%n 1669 1Formatting output pages... 1670 1%u 1671 1The schematic is not editable.%n 1672 1No insertion place exists.%n 1673 1No characters in the insertion string.%n 1674 1Please confirm back annotate by clicking the left mouse button, or abort by clicking the right mouse button.%n 1675 1Are you still sure?%n 1676 1EditSchematic must be selected prior to BackAnnotate command.%n 1677 1Aborted.%n 1678 1The file to be back annotated from is missing.%n 1679 1The Back Annotation file and the schematic do not match. Suggest that you discard edits and double check that the back annotation file pertains to this schematic.%n 1680 1Done.%n 1681 1The interface is not supported.%n 1682 1Back Annotation could not be done due to an unknown problem.%n 1691 1There is another net named %s, but it has no connectivity symbols.%n 1694 1Remainder of cluster also deleted.%n 1695 1Your connection would create a loop in an existing net! Connection not allowed.%n 1698 1Net removed from cluster as a result of edit.%n 1700 1The coordinates specified did not form part of a net. Nothing was applied.%n 1702 1Ignoring coordinate as it matches last coordinate specified.%n 1706 1Symbol %u not found in library. Replaced with safe symbol to avoid crash.%n 1707 1Library does not exactly match schematic, checking for problems... 1708 1%u symbol instances were replaced.%n 1709 1library contains all of the symbols in the schematic.%n 1710 1Reading schematic...page: 1711 1Schematic has old format: converting it (schematic must be edited and saved to retain this conversion)...page: 1713 1The connectivity symbol required to repair the schematic cannot be found in your library. Please see your System Administrator.%n 1714 1The library file is damaged. Please see your System Administrator.%n 1715 1This schematic does not have a library. Please see your librarian.%n 1716 1Schematic has obsolete format. Please see your System Administrator.%n 1717 1Schematic has unknown format (possibly due to file damage). Please see your System Administrator.%n 1718 1Format 1719 1%u 1720 1...clusters 1721 1...done.%n 1723 1Schematic already open.%n 1724 1The schematic is not presently open.%n 1725 1You must either Discard or Save your edits before doing a Close!%n 1726 1Cannot perform Close! due to unknown system failure.%n 1727 1You cannot 1728 1 while in the middle of an operation.%n 1729 1Close 1730 1create another view 1731 1save changes 1732 1erase changes 1733 1destroy a view 1734 1erase changes and close 1735 1back annotate 1736 1Click the left mouse button to confirm overwriting the old design.%n 1737 1Click the left mouse button to confirm discarding edits.%n 1738 1Only net name object properties can be copied.%n 1739 1Edits only occur when you click down and release the mouse inside a window.%n 1740 1A group of items that includes an object property cannot be copied.%n 1746 1Adding this connection would put a loop in the net. Source click ignored. %n 1748 1There is no editing to undo.%n 1749 1The extended bus lines had been edited. Those edits have been discarded.%n 1750 1New line numbers cannot be added to this bus. The original line numbers specified in the bus lines field must be used without duplicates. Apply failed!%n 1751 1Problems encountered trying to open the file: %s%n 1752 1Reading the file: %s 1753 1Problems encountered trying to open the From file. %n 1754 1. 1755 1Back annotating from Computervision file: %s%n 1756 1The ".pr" file has an old format. Please use a version of the 2.4 release to convert it and retry this command.%n 1757 1Could not find a ".pr" file for this folder.%n 1758 1Back annotating using Place and Route information... 1759 1 Done.%n 1760 1Placement contains %u symbols that are no longer in the schematic. Back annotation could not be done with them.%n 1761 1 Schematic contains %u unplaced symbols. These symbols not back annotated.%n 1762 1Library dictionary props are different. Not updating to library properties.%n 1763 1Some default values in the library dictionary are different. Not updating to library defaults.%n 1764 1Connecting the net to pin %u.%n 1765 1library dictionaries don't match so cannot extract symbols...aborted.%n 1766 1extraction aborted.%n 1767 1Problems encountered accessing replay file.%n 1768 1The schematic data is being used by another tool.%n 1769 1Please close the Output options Properties window before doing this action.%n 1770 1Please close the Schematic Properties window before doing this action.%n 1771 1Please close the Schematic Page Properties window before doing this action.%n 1772 1Please close the Schematic Display Properties window before doing this action.%n 1773 1Main line numbers cannot be left blank. Please specify a line number.%n 1774 1Connection names cannot have the same format as default net and bus names. "NN##" and "BB##" are the default name formats.%n 1775 1This change would merge two nets together that do not have connectivity symbols.%n 1776 1There is already a net in this schematic with that name. Please choose another name for your bus.%n 1777 1Apply to whole connection must be set to change line numbers on a bus.%n 1778 1There is already a bus in this schematic with that name. Please choose another name for your net.%n 1858 1All Schematic Tool Property windows must be closed before doing this action.%n 1859 1using file %s... 1860 1Loading design... 1861 1loading schematic file... 1862 1schematic file loaded... 1863 1finished macro: %s.%n 1864 1Two symbols representing macros have the same name, %s. Macros must have unique Symbol designators or be unnamed so Expert generates a unique name. Logic simulator load aborted.%n 1865 1In the timing section of System.sim for the symbol, %s, the pin name, %s, is an invalid %s pin name.%n 1866 1Parsing macro file for symbol: %s... 1867 1 cannot find either a .df, or .wire version of the macro file: %s. Simulator load aborted.%n 1868 1This pin name, %s, is an invalid pin name for this symbol, 1869 1One of the macro instances does not have nets connected to all of its pins. Continuing with the load.%n 1870 1This schematic contains a recursive use of a macro symbol, %s. I recommond that you abort this simulator load and fix this problem.%n 1871 1Two gates have the same function name: %s. Attempting to continue.%n 1872 1This net, %s, forms an invalid connection for this symbol 1873 1design loaded.%n 1874 1loading nets... 1875 1loading symbols... 1876 1opening System.sim... 1877 1An invalid entry was found while reading the timing information section for %s in System.sim. Attempting to use default values. 1878 1There is no technology type listed in System.sym for %s. Symbol ignored and load continuing.%n 1879 1There is no gate type listed in System.sym for %s. Symbol ignored and load continuing.%n 1880 1There is no section in System.sym for %s. Symbol ignored and load continuing.%n 1881 1A symbol on page %u does not have a Physical part name specified. This symbol cannot be looked up in System.sim and will be ignored in the load. Load continuing.%n 1882 1 ( 1883 1Symbol designator: %s 1884 1Physical part: %s 1885 1) 1886 1There is a bad pin name: %s, on this symbol 1887 1Cannot find corresponding pin on the map for pin %s on this symbol 1888 1Hierarchical expansion aborted.%n 1889 1The property sheet information has already been applied. This window will be removed when the command is completed. Abort ignored.%n 1890 1The property sheet information has already been applied. Apply ignored.%n 1891 1Property sheet information applied.%n 1892 1A net or a pin cannot be attached to an undefined width bus. To make this connection, first exit the command and define a width for the bus using the Bus Properties sheet.%n 1893 1Bus pins cannot be attached with this command unless they have the same size. To make this connection, first create a bus on the larger bus pin starting from that pin and using the pause bus command.%n 1894 1A bus cannot be attached to a bus pin that has a larger width. To make this connection, first create the larger bus attached to the bus pin using the pause bus command.%n 1895 1You cannot attach a bus pin to a net or bus. First create the bus by starting on the bus pin and then doing the pause bus command.%n 1896 1This connection would connect two nets or buses with different names. Connection not allowed.%n 1897 1Please Apply! or Abort! the information in the property sheet before continuing this command.%n 1898 1These connections have off-page connectors attached. You may be connecting parts of these nets on other pages together.%n 1899 1These items cannot be joined together! 1900 1Internal confusion - edit log is not open; proceeding anyway!%n 1901 1Internal confusion - schematic is not being edited; proceeding anyway!%n 1902 1Saving your edits...page: 1903 1...safe and sound.%n 1904 1Discarding your edits... 1905 1Your edits have been discarded. You may now proceed.%n 1906 1Internal confusion - schematic is not open; proceeding anyway!%n 1907 1Cannot reread schematic while other tools are accessing database. Please stop other operations and try again.%n 1909 1Both source and destination markers must be on the same page.%n 1910 1Cannot create line with zero length.%n 1911 1There is another net named %s. Please add a connectivity symbol to your net.%n 1912 1No net found to name.%n 1913 1Name Component has not yet been implemented.%n 1914 1Cannot rename a net containing a named logical or physical connector.%n 1915 1Property is meaningless for extended selection.%n 1916 1The Reference Designator must have at most 10 characters.%n 1917 1Specified rotation and mirroring of symbol has not been defined in the library.%n 1918 1Rotation and mirroring indicated maps to library entry with different pin count.%n 1919 1Line width incorrectly specified.%n 1920 1Only horizontal or vertical lines supported.%n 1921 1Cannot create line with zero length.%n 1922 1Cannot create line which goes outside border of page.%n 1923 1Apply failed!%n 1924 1Property sheet aborted.%n 1925 1MOVE only supported for a property sheet for a NET.%n 1926 1Which occurrence of the net name do you mean?%n 1927 1Source and destination must be supplied for MOVE.%n 1928 1COPY only supported during a property sheet for a NET%n 1929 1You haven't specified where to place the copy of the net name!%n 1930 1This connection does not have a user-specified name. Placing the default name.%n 1931 1DELETE only supported for a property sheet for a NET.%n 1932 1You can only DELETE an occurrence of the net name.%n 1933 1Paste not supported when property sheet up.%n 1934 1Cannot bring up two property sheets at once.%n 1935 1Expand not supported when property sheet up.%n 1936 1Selection must be an occurrence of the net name.%n 1937 1Cannot have pins or object properties in cluster. Command aborted.%n 1938 1You cannot delete object properties or pins.%n 1939 1You have specified an invalid value.%n 1940 1Specified value (%s) will be rounded to %s.%n 1941 1Object properties don't have properties.%n 1944 1Can not move or copy net chunks from format page to logic page.%n 1945 1The DELETE key is not supported for this mode.%n 1946 1The AGAIN key is not supported for this mode.%n 1947 1Bus width cannot be changed because it is attached to a bus pin with defined width.%n 1948 1You cannot increase the width of a sub-bus.%n 1949 1This operation will set the width of the connected bus pin.%n 1950 1The net name %s conflicts with another net in the schematic.%n 1951 1Net names can not be duplicated in the line mapping.%n 1952 1Main connection does not have line %u.%n 1953 1Cursor must not be on a connection when the Pause bus command is given.%n 1954 1The Pause bus command can only end a bus connection. The connection you are working on is not a bus.%n 1955 1Please close the user defined property sheet before proceeding.%n 1956 1This object does not have any user defined property in the library dictionary.%n 1957 1A pin cannot be moved or copied without its associated component.%n 1958 1A bus connector cannot be moved or copied without one of its connections.%n 1959 1Selection is too big to move or copy to this schematic.%n 1960 1This operation is not allowed across schematics.%n 1961 1This operation is not allowed across pages.%n 1962 1You cannot move critical connectivity symbols across pages or schematics.%n 1963 1%s is not a valid entry to describe the new lines for the bus. The line numbers can be separated by a comma or a space for individual lines and by a colon or a dash for a line range.%n 1964 1Spaces between characters are not allowed in an entry defining the pin numbers.%n 1965 1Same bus line can not be mapped to different pins on the bus pin.%n 1966 1Bus line numbers that define the mapping between the bus pin and the bus should fall within the range of the bus pin width.%n 1967 1A bus connector cannot be deleted without one of its connections.%n 1968 1Library dictionary props are different. Confirm to use the properties, if any, in the library dictionary by clicking the left mouse button.%n 1969 1Some default values in the library dictionary are different. Confirm to use the defaults in the library dictionary by clicking the left mouse button.%n 1970 1There are no properties on this page.%n 1971 1The destination schematic must be made editable before an object can be moved or copied to it.%n 1972 1The grid and template of this schematic do not match with those of the source schematic; hence object(s) can not be moved or copied to this schematic from the source schematic.%n 1973 1Starting point cannot be on any object appearing on a schematic's page. After selecting Start bus, move your cursor to an open space; then press your left mouse button.%n 1974 1The line numbers that can form the new bus should come from the existing bus.%n 1975 1Cannot remove line %u, because it is part of one of the sub-connections.%n 1976 1The width of the bus must be greater than that of any of its sub-connections.%n 1977 1There are no symbols or connections on this page. You can only create a connection with the "Start bus" command.%n 1978 1There are no properties for this pin.%n 1979 1Neither any private library nor the system library is available for the document %s. 1980 1The schematic cannot be edited while it is being updated by another process OR when the board from the same folder is open OR when a schematic object property sheet is active.%n 1981 1Same net on different lines of the bus cannot be given different names.%n 1982 1The width of the bus will be set to %u... 1983 1You may only rotate or mirror a symbol which does not have nets attached.%n 1984 1You may only rotate or mirror a symbol.%n 1985 1The schematic cannot be closed while a schematic object property sheet is open.%n 1986 1Please close the schematic object property sheet before attempting this action.%n 1987 1This bus name or number is used by another bus that has %u lines. You cannot merge buses with different widths.%n 1988 1This bus name or number is used by another bus. The bus width cannot be changed when merging two buses.%n 1989 1This bus name or number is used by another bus. Buses cannot be merged when "Apply to whole bus" is not set.%n 1999 1Dummy message holder.