0 PlaceRoute.msgs - last edit: Rigler 29-Jan-86 11:35:32 4000 1Ignoring bug, forging ahead.%n 4001 1Etch Router Aborted.%n 4002 1Bad layer option: if all is specified for one layer direction, it must be specifed for both.%n 4003 1Spacing Etch.%n 4004 1Setting up channels.%n 4005 1Etch router aborted while routing.%n 4006 1Routing pin-pin connections.%n 4007 1Routing via connections.%n 4008 1Routing cross-over connections.%n 4009 1Etch router aborted by user.%n 4010 1Writing out etch traces.%n 4011 1%d segments were completed out of %d total (%d %%).%n 4012 1%d etch incompletes were not completed. %d feed-throughs were added.%n 4013 1Checking Etch.%n 4014 1All Done.%n 4015 1Space Etch Aborted.%n 4016 1Click to continue.%n 4017 1%s.%n 4018 1Click to confirm Minimal Space Etch.%n 4019 1Building data structures for layer %u.%n 4020 1Finding invalids.%n 4021 1Shoving etch %s 4022 1. 4023 1%n 4024 1Routing Driver is still processing a command: aborting deactivation.%n 4025 1Interrupt acknowledged. Stand by...%n 4026 1Pass number %u has finished.%n 4027 1Pass number %u was interrupted by user. Type the pass number with which you want to continue, and then invoke Go!%n 4028 1Click to confirm Routing Driver Go!%n 4029 1Routing Driver window will be closed. Click to confirm.%n 4030 1Routing Driver is processing pass number %u.%n 4031 1Routing Driver list has been saved to file: %s.%n 4032 1Click to confirm automatic global routing.%n 4033 1Global router aborted by user.%n 4034 1Routing Driver will continue with pass number %u. Click to confirm.%n 4035 1Routing Driver is already open.%n 4036 1Pass number does not exist.%n 4037 1Initializing data for global router...%n 4038 1Globally routing nets...%n 4039 1Minimal space etch aborted.%n 4040 1The pin with coordinate (%d, %d) lies outside the routing area...cannot route the connection.%n 4041 1Discarding etch incompletes...%n 4042 1Click left mouse button down to define upper left corner of box, hold down and drag to lower right corner, then lift up.%n 4043 1Root's parent not NIL!%n 4044 1Parent pointer error!%n 4045 1Bad tree!%n 4046 1Updating channel density...%n 4047 1Point has etch on non-signal layer #%u.%n 4048 1Incomplete has etch!%n 4049 1Complete has no etch!%n 4050 1Root has etch!%n 4051 1Non-null from layer on global incomplete!%n 4052 1Rectangles being processed have an unknown orientation.%n 4053 1Unknown file error.%n 4054 1File name is too long.%n 4055 1Invalid operation for file.%n 4056 1Point's coordinate not at either end of etchOnLayer!%n 4057 1First etch bend at same coord as last bend!%n 4058 1Etch on layer array too short!%n 4059 1Zero length etch!%n 4060 1Aperture #%u has an invalid shape.%n 4061 1Top channel edge is at %d; should be at %d.%n 4062 1Bottom channel edge is at %d; should be at %d.%n 4063 1Right channel edge is at %d; should be at %d.%n 4064 1Left channel edge is at %d; should be at %d.%n 4065 1%u nets have unknown types.%n 4066 1%u points have an incorrect routing status.%n 4067 1Layer #%u has an unknown layer type.%n 4068 1Please confirm to overwrite it.%n 4069 1This operation may have caused the channel density to change. Update channel density to obtain a current channel display.%n 4070 1Apply! in the Routing Properties sheet will create or change a line indicated by the pass number field.%n 4071 1Via has been placed in such a way that etch might cross other etch.%n 4072 1This file is not a Routing Driver data list file.%n 4073 1File %s already exists. 4074 1No data has been entered in the Routing Driver window.%n 4075 1Incorrect pass number!%n 4076 1Please specify a file name in the File name: field.%n 4077 1The file %s does not exist.%n 4078 1You can only add a single point to a net using the invoked function.%n 4079 1The specified net(s) have already been deleted.%n 4080 1The stitching nets create net property sheet already exists.%n 4081 1One or more of the selected points are presently on a net.%n 4082 1No net name was specified.%n 4083 1Stitching nets already enabled.%n 4084 1Selection for removal is invalid.%n 5000 1You cannot open the PC board named: %s because it is already open.%n 5001 1You cannot close the PC board named: %s because it is not open.%n 5002 1Placing fully annotated symbols into existing parts.%n 5003 1Your changes will be saved. Click to confirm!%n 5004 1You cannot create another view 5005 1You cannot save your changes 5006 1You cannot erase your changes 5007 1You cannot discard any items 5008 1Your placement will be discarded. Click to confirm!%n 5009 1Your etch complete routing will be discarded. Click to confirm!%n 5010 1Your etch incomplete routing will be discarded. Click to confirm!%n 5011 1All of your connections will be discarded. Click to confirm!%n 5012 1Your changes will be discarded. Click to confirm!%n 5013 1You cannot edit the PC board 5014 1You cannot deactivate the %s window.%n 5015 1Click to confirm to update channel density.%n 5016 1 while the current operation is in progress.%n 5017 1 until after you edit the PC board.%n 5018 1 for an unknown reason.%n 5019 1You cannot destroy a view 5020 1Invalid coordinate for part!%n 5021 1You cannot close the PC board 5022 1The PC board will be closed. Click to Confirm!%n 5023 1You cannot erase your changes and close the PC board 5024 1You cannot save your changes and close the PC board 5025 1Your changes will be saved and the PC board closed. Click to Confirm!%n 5026 1You cannot create a routing property sheet 5027 1You cannot create a display property sheet 5028 1All PC boards must be closed before the library may be updated.%n 5029 1That operation is not allowed 5030 1Please confirm to do automatic placement.%n 5031 1Please confirm to do automatic etch routing.%n 5032 1Please confirm to do space etch.%n 5033 1Please confirm to do Check Board.%n 5034 1None of the unplaced symbols can be placed in this part.%n 5035 1You must either Apply! or Abort! the property sheet.%n 5036 1Etch cannot be placed on a null layer. Please set the current layer using the Find key.%n 5037 1The requested operation cannot be attempted until current operation is completed.%n 5038 1That selection operation is not yet implemented.%n 5039 1You cannot use the COPY key 5040 1You cannot use the MOVE key 5041 1Etch cannot be placed beyond the range of the board.%n 5042 1You cannot use the DELETE key 5043 1Reading schematic net list data.%n 5044 1Please select a symbol.%n 5045 1Checking that net list data for the board and schematic are consistent.%n 5046 1All routing connected to the point at coordinate (%d, %d) on the net named: %s with net number %u were made global incomplete because the point cannot connect to layer number %u.%n 5047 1Part cannot be placed beyond the range of the board.%n 5048 1The schematic (.df) for the selected board either does not exist or is being edited. This board cannot be opened.%n 5049 1You may edit the board, but you will not be able to save the results of packaging or placement changes to the schematic. Click to confirm.%n 5050 1Tree Bug: Root has sibling.%n 5051 1Tree Bug: Root has parent.%n 5052 1Tree Bug: Abandoned by parent.%n 5053 1Tree Bug: Sibling rivalry.%n 5054 1Tree Bug: Orphan and not root.%n 5055 1Tree Bug: More than 100 siblings.%n 5056 1Etch Bug: EtchComplete point has no etchOnLayer.%n 5057 1You cannot save your changes to the board since you cannot write the schematic.%n 5058 1The request to write the .pcb did not succeed. Your .df and .pcb could now be inconsistent. You should use the folder tool recover command on the .df to restore consistency.%n 5059 1The .pcb file for this .pr file already exists. Please confirm to allow the .pcb file resulting from a previous conversion to be overwritten.%n 5060 1Your changes will be discarded and the board closed. Click to confirm!%n 5061 1Etch Bug: EtchOnLayer array is too short or too long.%n 5062 1You do not have write access to both the .df and .pcb files that you have requested to save. You cannot save your changes.%n 5063 1You cannot erase your changes to the board since you cannot re-read the schematic.%n 5064 1Please select something and try the operation again.%n 5065 1Edit etch cannot accept nets selected by double-clicking the left mouse button.%n 5066 1Please select a connection that you want to edit and try the operation again.%n 5067 1There is nothing to Apply. Please Abort to exit this mode.%n 5068 1To begin, please select a starting point on the net.%n 5069 1You clicked the right mouse button, but there is nothing to undo.%n 5070 1Connecting where you have indicated will create a loop. Loops are not allowed.%n 5071 1Connecting here will not complete the connection.%n 5072 1Duplicate via ignored.%n 5073 1New via is within a no-via area.%n 5074 1Duplicate bend ignored.%n 5075 1Etch is being placed outside of the routing area.%n 5076 1Etch has crossed a no-route area.%n 5077 1Attempted to apply from too far away.%n 5078 1Lines affected by the stretch command must begin with an orientation that is a multiple of 45 degrees.%n 5079 1Stretch is not allowed when lines do not meet at the stretch point in an angle.%n 5080 1No such command exists.%n 5081 1Edits only occur when you click down and release the mouse inside a window.%n 5082 1This command can only act on etch complete routing.%n 5083 1The selected routes must be collinear for this command.%n 5084 1You cannot close the board since the schematic is locked.%n 5085 1Stretch cannot move an incomplete.%n 5086 1When using this command the selection must not pass pins or vias.%n 5087 1You cannot stretch etch that has part pins or connector pins at the end to be stretched.%n 5088 1You cannot stretch etch that has a via at the end to be stretched.%n 5089 1You cannot stretch etch past forks.%n 5090 1The selected etch must all be on the same layer for this command.%n 5091 1The specified etch is shorter than the default length for a notch.%n 5092 1The selected connections must be at angles that are multiples of 45 degrees.%n 5093 1Unknown problem in Drag, Stretch or Notch.%n 5094 1This command cannot act on a selection that contains a fork.%n 5095 1Etch to be dragged must attach to neighboring etch at an angle that is a multiple of 45 degrees.%n 5096 1The etch segment is already on the specified layer.%n 5097 1Please select a single etch segment.%n 5098 1Drop does not operate on extended selections. Please select a single etch segment.%n 5099 1Vias are not allowed in No-Via and No-Route Areas.%n 5100 1The selection includes some segments that are incomplete. The etch width was not changed for those segments.%n 5101 1The PC board is not available for placement.%n 5102 1You cannot place symbols on the PC board 5103 1Insufficient disk space to complete the operation. Please Re-Boot and then delete some files before re-attempting the operation.%n 5104 1There are no more symbols to display. Use NEXT to start over.%n 5105 1There are no more symbols in the part.%n 5106 1The destination must be specified for placement of pin 1.%n 5108 1The symbol is not on the same page displayed in the Schematic.%n 5109 1Please select a single global incomplete connection.%n 5110 1Line defined by point must stay in one channel.%n 5111 1To Manual Global Route please set the etch incompletes display option for a view.%n 5112 1That channel intersection doesn't have any pins on the net.%n 5113 1No parts, silkscreens or component shapes were contributed to the private library.%n 5114 1No private or system library was found. This board cannot be opened.%n 5115 1You cannot swap pins on an empty part site.%n 5116 1There were %u symbols placed.%n 5117 1 including %u symbols with unbound pins.%n 5118 1Internal error trying to swap pins - no matching site pin could be found for one of the selected pins.%n 5119 1Estimated Wire Length = %u inches.%n 5120 1Placement Errors = %u.%n 5121 1Neither of the pins selected are attached to a net. Nothing could be swapped.%n 5122 1No net with internal net number: %u could be found on the schematic. This net will be deleted.%n 5124 1The selection cannot extend past invisible sections of the net.%n 5125 1The selection cannot be extended in that way.%n 5126 1The selection cannot be extended to that segment.%n 5127 1There are no symbol choices because the part is full.%n 5128 1There are no symbol choices because all of the symbols have been placed.%n 5129 1There is no property sheet for what is now selected.%n 5131 1Please select a part.%n 5133 1There is no System.Lib.%n 5138 1No equivalent sites were found.%n 5139 1Please select a pin.%n 5140 1No equivalent pins were found.%n 5141 1There is no net associated with the selected pin.%n 5146 1Pin1 x value would put pin off grid. x value updated.%n 5147 1Pin1 y value would put pin off grid. y value updated.%n 5148 1Apply failed.%n 5154 1Cannot place part %u on PC board since pad stack for pin %u doesn't match any values in the pad stack table for the board.%n 5155 1%n 5158 1No choice made, hence Apply! treated as if Abort!%n 5159 1The destination cannot be beyond the edges of the PC board.%n 5160 1There is already a channel edge at the specified coordinate.%n 5161 1Please select a destination for the channel operation.%n 5162 1The edges of the PC board cannot be deleted.%n 5163 1The edges of the PC board cannot be moved.%n 5164 1You cannot move a channel past its immediate neighbor.%n 5167 1Destination must be an unoccupied part site or contain an empty part site.%n 5170 1The specified part cannot contain that symbol.%n 5171 1The specified site cannot contain that symbol.%n 5174 1Destination must be a pin.%n 5175 1Source and destination pins must be in same part.%n 5176 1Source and destination pins must be in same symbol.%n 5177 1Source and destination pins must be equivalent.%n 5178 1The selected object cannot be copied.%n 5179 1That operation will delete all routes on the selected net. Please confirm to delete.%n 5180 1Part contains placed symbols. Please confirm deletion of part AND symbols!%n 5181 1Selected item cannot be deleted.%n 5185 1The selected object cannot be moved.%n 5186 1Please select a destination for the move.%n 5188 1Done.%n 5192 1Reading PC board... 5193 1Problem opening design.%n 5194 1Board has unknown format.%n 5195 1Board has obsolete format.%n 5198 1Board has old format: converting it ...%n 5199 1parts... 5200 1symbols... 5201 1nets... 5203 1Design rules have been changed since last store of PC board by Place and Route package. Please run Space etch or Check Board to verify agreement with design rules.%n 5206 1Unknown AOSStatus.%n 5207 1Symbol is already placed.%n 5208 1Please choose a part to implement the symbol.%n 5209 1Symbol is not in the schematic read by the PlaceRoute tool.%n 5210 1Symbol is placed onto PC board.%n 5211 1Please place your destination marker where you would like the symbol placed.%n 5214 1No free, matching site is available in the part.%n 5215 1No part is available to implement the symbol.%n 5216 1PlaceRoute PC board must first be opened.%n 5217 1PlaceRoute PC board must first be made editable.%n 5219 1Attempt to place connector into part!%n 5221 1Symbol is placed onto PC board, but some pins in the site are unbound.%n 5223 1Schematic specifies that a net named %s with net number %u has etch rule %u but that rule wasn't defined in the trace table of the .DWG file. The net has been assigned rule number %u.%n 5224 1Saved placement contains %u nets that are no longer in the schematic.%n 5233 1Verifying unplaced symbols can be packaged for board...%n 5234 1...aborted by user.%n 5235 1...done.%n 5236 1Number of unplaced symbols: %u%n 5248 1Symbol %u has pin that is to go to pin number %u on part %u but part has no such pin.%n 5249 1Symbol %u cannot be placed in part %u since a valid pad stack does not exist for pin %u.%n 5250 1Symbol %u has no matching entry in packaging rules.%n 5251 1Symbol parameters: 5252 1No symbol parameters specified. 5253 1 Dev1 = %s 5254 1 Dev2 = %s 5255 1 Dev3 = %s 5256 1 Physical part = %s 5258 1Plotter name from user.cm file not available on net.%n 5259 1Plotter names available on net are:%n 5260 1%s%n 5261 1Selected plotter is offline.%n 5262 1Printing incompletes.%n 5263 1Board formatted, ready to send.%n 5264 1File PrintTest.vds created, use Courier Tool to send.%n 5265 1No User.cm file.%n 5266 1No 'BoardHardcopy' section in user.cm.%n 5267 1Using plotter %s.%n 5268 1Unrecognized value after 'LayerOption' item. 'all', 'paired' or 'single' expected. 'paired' will be used.%n 5269 1Invalid number after 'Zoom'.%n 5270 1Invalid number after 'Shrink'.%n 5271 1No 'Address' entry under BoardHardcopy section.%n 5272 1Unrecognized boolean value. 'FALSE' will be used.%n 5273 1Plotting layer number %d.%n 5274 1 while the symbol window contains symbols.%n To clear the symbol window, select anything on the PC board.%n 5275 1Part # %u has pad stack count of %u which differs from the pin count of %u.%n 5276 1All routing connected to one of the points on the net named: %s with net number %u were made global incomplete because the coordinates stored in the point and routing were inconsistent.%n 5277 1Invalid operation on file: %s.%n 5278 1File %s is too long.%n 5279 1Stop editing %s.%n 5280 1Unknown file error: %s.%n 5281 1There are no visible %s to be selected.%n 5282 1Please make them visible with the Display Properties window.%n 5283 1Please select a part or an etch segment and try the operation again.%n 5284 1System.lib has been replaced by the private library %s. Any discrepancies between the System.lib and the private library %s may cause problems.%n 5285 1It is recommended that you save or erase any changes and close the board. You can then safely open the board with the new library.%n 5286 1It is recommended that you close the board. You can then safely open the board with the new library.%n 5287 1You may not proceed with this operation until the operation currently running on the %s board has completed.%n 5288 1The Display Properties Sheet is already open for this view.%n 5289 1The bounding boxes of the two parts to swap will overlap.%n 5290 1Please click to confirm placement!%n 5291 1The bounding box of the part with reference designator %s will not be entirely inside the board routing area.%n 5292 1The reference designator for part %s will not be entirely inside the board routing area.%n 5293 1The bounding box of the part with reference designator %s will overlap a No-Placement area.%n 5294 1The bounding box of the part with reference designator %s will overlap the part with reference designator %s, and possibly others.%n 5295 1The bounding box of the part with reference designator %s will overlap a No-Etch area.%n 5296 1Automatic placement was stopped in response to the STOP key.%n 5297 1%u of the placed parts overlap at least one No-Etch area.%n 5298 1The reference designators of %u of the placed parts are not completely inside the routing area.%n 5299 1Stretch does not allow etch bends outside the range of the board.%n 5300 1Vias cannot be moved outside of the routing area.%n 5301 1Please press both mouse buttons over the word "Choices" to see the set of choices allowed.%n 5302 1 Logical pin: %u with physical pin: %u type: %s swap code: %u %n 5303 1 Physical pin: %u type: %s swap code: %u refDes: %s siteNum %u %n 5304 1Logical element with refDes: %s siteNum %u dev*: %s %s %s and phys part: %s %n 5305 1Physical element with refDes: %s siteNum %u %n 5306 1Net: %u named: %s contains ...%n 5307 1Physical pins not on any net ...%n 5308 1A pin with physical pin number %u on a part with reference designator %s, site number %u, type %s and swap code %u cannot be attached to any net with the same type and swap code.%n 5309 1Net number %u named %s with type %s and swap code %u is being deleted from the board because no net with a matching number was found on the schematic.%n 5312 1Net number %u is being renamed from %s to %s.%n 5313 1Net number %u named %s is being changed from etch rule %u to etch rule %u.%n 5314 1Layer number %u of type %s and swap code %u has no matching net.%n 5315 1Net with number %u named %s contains %u unplaced physical connector symbols.%n 5316 1Power or ground net with number %u named %s contains no physical connector symbols.%n 5317 1In the schematic property sheet for a symbol with id: %u pin number %u was annotated with part pin number %u. The type or swap code of that pin on part with id: %u does not match the symbol's pin.%n 5318 1Pin number %u on part with id: %u is used both by pin number %u and some other pin on symbol with id: %u.%n 5319 1Part with id %u can contain symbol with id %u in site number %u.%n 5321 1Part with id %u cannot contain symbol with id %u in any site.%n 5322 1Adding a pin with symbol pin number %u and physical pin number %u on a symbol with id %u and reference designator %s to logical net number %u. The pin has swap code %u and the net has swap code %u.%n 5323 1Adding a pin with symbol pin number %u and physical pin number %u on a symbol with id %u and reference designator %s to logical net number %u. The pin has type %s and the net has type %s.%n 5324 1Adding a pin with physical pin number %u on a part with id %u and reference designator %s to physical net number %u. The pin has type %s and the net has type %s.%n 5325 1Adding a pin with physical pin number %u on a part with id %u and reference designator %s and site number %u to physical net number %u. The pin has swap code %u and the net has swap code %u.%n 5326 1The current layer pair cannot be changed once etch incompletes have been drawn.%n 5327 1There are no layer pairs displayed. Please use the display property sheet to display a layer pair.%n 5328 1There is no corresponding etch rule for the etch segment with width %u mils on the net named %s with net number %u and end coordinates of (%d, %d) and (%d, %d). Etch rule %u was substituted.%n 5329 1The %s cannot connect to layer number %u.%n 5330 1The string %s is being used and has been replaced by %s. Please select Apply! in the property sheet to confirm the change.%n 5332 1The coordinate of pin number %u on the part with id %u has changed as a result of converting the connector.%n 5333 1The part id %u given for the connector named %s is not valid. Please specify a valid part id.%n 5334 1To convert connectors please enter a valid part id and orientation for each connector listed in the Connector Conversion property sheet.%n 5336 1Board was last written with version %s software. 5337 1Board file type is %s. 5338 1Board was last edited by %s. 5339 1Purpose of last edit was %s. 5340 1Last edit was at %s.%n 5342 1Problem reading board: bad layer.%n 5343 1Problem reading board: bad keepout.%n 5344 1Problem reading board: bad via grid.%n 5345 1%nProblem reading board: bad aperture.%n 5348 1Board written.%n 5351 1File is unreadable; probably truncated.%n 5352 1Problem reading board: Section %u was too big; reading aborted.%n 5353 1Problem reading board; invalid section. Last valid section was %u.%n 5354 1Problem reading board; bad version: %u.%n 5356 1Problem reading board: bad pin grid length: %u.%n 5357 1%nProblem reading board: bad aperture shape.%n 5358 1Problem reading board: bad via pad stack length.%n 5359 1Problem reading board: inconsistent number of etch rules.%n 5361 1%nProblem reading board: there is no part for the part pin at coordinate (%d,%d) on net #: %u (%s). All routing to it will be deleted.%n 5362 1design rules... 5363 1You may edit the board, but you will not be able to save the changes. Click to confirm.%n 5364 1%nThe number of pins on part %s has changed since the board was last read.%n 5365 1All routing attached to pin numbers above %u will be deleted.%n 5366 1Pin number %u on part %s no longer exists. The old routing has been deleted.%n 5367 1The routing between the points with coordinates (%d,%d) and (%d,%d) was made incomplete because the etch rule of one of its segments no longer exists.%n 5368 1The part %s with id %u and pin-1 coordinate (%d,%d) already exists. It will keep that reference designator rather than %s.%n 5369 1Pin number %u on part %s with id %u indexes pad stack %u, which no longer exists in the Part Pad Stack Tables.%n 5370 1Unknown aperture shape...will change to circle.%n 5371 1Aperture's height (%u) and width (%u) are unequal...size will default to height.%n 5372 1Unknown rectangle type found.%n 5373 1Unknown layer type found.%n 5374 1%s spacing too small to be displayed reasonably.%n 5376 1Negative values not allowed in grid property sheet.%n 5377 1Zero not allowed for grid steps.%n 5378 1Automatic placement grid values must be in multiples of the manual placement grid.%n 5379 1Click the left mouse button to confirm changing via grid step (one or more existing vias will be off grid).%n 5380 1Click the left mouse button to confirm changing manual placement grid step (one or more part pin-1's will be off grid).%n 5381 1Click the left mouse button to confirm converting the pr file to the new file format.%n 5382 1Please confirm to delete all empty parts.%n 5383 1The Grid Properties Sheet is already open for this board.%n 5384 1The Color Properties Sheet is already open for this view.%n 5385 1Please select a part site.%n 5386 1You have made a %s net capable of being changed by space etch.%n 5387 1There are no symbols assigned to that part.%n 5388 1The PC cannot be opened while the schematic is being edited.%n 5389 1The PC cannot be opened because the schematic cannot be accessed.%n 5390 1The reference designator %s has already been used. The new part will have a reference designator of %s.%n 5391 1Only a part can be swapped with a part.%n 5392 1An existing part also has %s as its reference designator.%n 5393 1The connector named %s has %u fingers and the part with id %u has %u pins.%n 5394 1The PC Board conversion has been aborted. Please fix the problems mentioned in the preceding error messages and try the conversion again.%n 5395 1There is no circle-shaped aperture with size: %u mils to correspond to etch rule: %u. The last circle-shaped aperture with size: %u was substituted.%n 5396 1The default etch rule of net number %u is etch rule %u, which no longer exists in the Etch Rule Table. If this etch rule is not re-added to the Etch Rule Table, the default will be changed to the last etch rule in the table when you next open the board.%n 5397 1The routing between the points with coordinates (%d,%d) and (%d,%d) references etch rule %u, which no longer exists in the Etch Rule Table. The routing will be deleted when you next open the board, if the etch rule is not re-added to the Etch Rule Table.%n 5398 1A "no interior etch" rectangle is defined in the drawing, but the board has no interior signal layers. The rectangle will be ignored.%n 5399 1A "no top etch" rectangle is defined in the drawing, but the top layer of the board is not a signal layer. The rectangle will be ignored.%n 5400 1A "no bottom etch" rectangle is defined in the drawing, but the bottom layer of the board is not a signal layer. The rectangle will be ignored.%n 9999 1This phony message is here so that the message utility won't run off the end of the file.%n