0	Libraries.msgs - last edit:  Cate3   29-Jan-86 15:09:04
1	1No source specified.%n
2	1Not creating text, backspace undefined.%n
3	1No characters in the insertion string.%n
4	1Nothing is selected.  Please select the items to be copied.%n
5	1Destination moved so copy is multiple of pin text grid.  Retry.%n
6	1Destination moved so copy is multiple of grid.  Retry.%n
7	1Can't delete while a property sheet is present.%n
8	1Can't delete while creating text.%n
9	1Cannot delete logic uniqueness, physical name, or device specific text.%n
10	1Cannot delete name or number for pin without deleting lead.%n
11	1Nothing is selected.  Please select the items to be moved.%n
12	1Destination updated so move is multiple of pin text grid.  Retry.%n
13	1Destination updated so move is multiple of grid.  Retry.%n
14	1Nothing is deleted.%n
15	1Can't undo a delete while a property sheet is present.%n
16	1Can't undo a delete while creating text.%n
17	1Copying the logic uniqueness designator item is not allowed.%n
18	1Copying the physical name item is not allowed.%n
19	1Copying a device specific text item is not allowed.%n
20	1MOVE cannot be performed; some of the selected items will be moved too far.%n
21	1Source must be specified.%n
22	1Destination must be specified.%n
23	1Based on selection mode, closest item to destination marker is a text item.  A text item is not a valid item for this command.%n Please change the selection mode or move the destination marker and try again.%n
24	1Source and destination must be specified.%n
25	1Destination put on orthogonal line with source.  Retry.%n
26	1Empty string, no entry created.%n
27	1Too close to left side of window.%n
28	1Moved destination so central grid line exists.  Retry.%n
29	1Too close to top of window.%n
30	1Nothing selected.  Please select a single item and try again.%n
31	1Several items selected.  Can only move to the end of one of them.%nPlease select a single item and try again.%n
32	1Based on selection mode, closest item to source marker is a text item.  A text item is not a valid item for this command.%n Please change the selection mode or move the source marker and try again.%n
33	1Based on selection mode, cannot find any item to move destination marker on.%nPlease change the selection mode and try again.%n
34	1Grid/Template for design file doesn't match grid/template for symbol.%n
35	1Schematic has obsolete format.  Please see your System Administrator.%n
36	1Schematic has unknown format (possibly due to file damage).  Please see your System Administrator.%n
37	1Schematic has old format.  Please use schematic tool to update.%n
38	1Design not found on the disk.  Please make sure it exists.%n
39	1Symbol is already defined for another grid and template.%n
40	1Pin %u does not have a name.%n
41	1No selection.  Please select something to display properties.%n
42	1Cannot Apply! without setting any autoroute flags.%n
43	1Cannot Apply! when there are no characters in the pin name.%n
44	1Cannot Apply! when the pin number is not in range 1 to 256.%n
45	1Cannot Apply! when there are no characters in the text item.%n
46	1To erase the characters from the symbol, hit DELETE.%n
47	1Cannot Apply! unless 'Font' is between %u and %u, inclusive.%n
48	1Pin numbers must be unique within symbol.  Pin number %u used twice.
49	1Pin %u needs auto route flags set so nets can begin or end on it!%n
50	1There must be at least one pin lead on a symbol!%n
51	1The pins must be numbered consecutively beginning at 1. Pin %u is the highest numbered pin, and pin %u is missing.%n 
52	1%u pins processed.%n
53	1Pin %u does not have a name.%n
54	1%n
55	1No string typed.
56	1Must finish editing text before continuing.%n
57	1Must finish editing property sheet before continuing.%n
58	1Item would go off top of window.  Rotate aborted.%n
59	1Item would go off left side of window.  Mirror aborted.%n
60	1The specified entry is either not a logic symbol or not in the library.%n
61	1The specified entry is in the library but has incorrect type.%n
62	1There is no library on your desktop.%n
63	1Please specify the id of the entry to be %s.  The default specification is not valid.%n
64	1The specified id is reserved for system use.%n
65	1Another view has been created.%n
66	1Desktop-library.binary has old format. Please see your System Administrator. Continuing with the conversion ... %n
67	1Desktop-library.binary not found.%n
68	1Desktop-library.binary has an unrecognized format.%n
69	1System.lib cannot be opened.%n
70	1Not yet implemented for this entry type.%n
71	1The library entry: %u has been removed.%n
72	1The entry specified is not in the library.%n
73	1You are not allowed to change the library; please see your System Administrator.%n
74	1%s is not an available library on this workstation at the present time.%n
75	1Please specify a library.%n
76	1'From library' cannot be System.lib.%n
77	1'From library' cannot be System.lib$.%n
78	1The 'Highest id' can not be smaller than the 'Lowest id'.%n
79	1Entry %u does not exist in %s.%n
80	1Entry %u already exists in the system library. Please set 'Overwrite old ids' and try again.%n
81	1Entry %u from %s has been copied to %s.%n
82	1%u entries from %s have been copied to %s.%n
83	1No entries in %s could be merged to %s. Please check the Merge! fields.%n
84	1No entries in %s could be merged to %s. Please check 'Overwrite existing ids' and other Merge! fields.%n
85	1Every symbol must have a name.  Please fill the 'Symbol name' in.%n
86	1Shapes must be within the bounding box.%n
87	1The new entry has been written.%n
88	1The specified Grid and Template combination is not in the library. Try {1/8, 1/2} or {1/10, 3/4} only!%n
89	1The library backup has been created.%n
90	1%s is already in use.%n
91	1Confirm over-writing a symbol entry%n
92	1The library can not be opened. Command aborted.%n
93	1There is no packaging file. Command aborted.%n
94	1Time stamp mismatch between %s %t and it's packaging file %t. Command aborted.%n
95	1A listing of the packaging rules is in progress. Command aborted.%n
96	1The library can not be opened. Command aborted.%n
97	1There is no abbreviations file. Command aborted.%n
98	1A listing of the abbreviations is in progress. Command aborted.%n
99	1This window cannot be deactivated. Try Destroy view!%n
100	1This window cannot be deactivated. Try Abort!%n
101	1Property sheet aborted.%n
102	1Symbol %u has obsolete format. Use Convert! in Library Editor.%n
103	1Confirm writing a new entry%n
104	1Confirm over-writing a NON-symbol entry%n
105	1Converting the system library ... %n
106	1Creating %s ... %n
107	1The conversion is complete.%n
108	1Deleting %s ... %n
109	1Renaming %s to be %s ... %n
110	1Associating the abbreviation file with the converted library ...%n
111	1Associating the packaging file with the converted library ...%n
112	1Symbol %u has an unconverted format.  Contact your librarian.%n
113	1...Command aborted!%n
114	1Symbol %u has a different grid & template than the conversion expected. Ignored! %n
115	1Entry %u will not be merged because of package verification problems.%n
116	1Symbol %u is invalidly formated. Ignored! %n
117	1The default Template will be used.%n
118	1A different Template {%u/%u} is used by the specified design folder!%n
119	1Packaging rule %s copied from %s to %s%n
120	1Merging %s from %s to %s%n
121	1Abbreviations for %u have been copied from %s to %s%n
122	1No abbreviations from %s could be copied to %s%n
123	1Abbreviations for %u symbols have been copied from %s to %s%n
124	1%s needs to be converted using the Convert! command in the Library Maintenance Tool%n
125	1Use the Load! command to specify the destination library for the Merge! command.%n
126	1Please specify a source library for the Merge! command.%n
127	1%s needs to be converted with the Convert! command prior to using it in the Merge! command.%n
128	1The library entries meeting the selection criteria have been listed.%n
129	1You do not have write access to %s.%n
130	1Confirm to remove all entries which satisfy the selection criteria.%n
131	1%u entries are about to be removed.%n
132	1Confirm the removal again please.%n
133	1Merging from a library into itself is not allowed.%n
134	1No entries satisfy the removal criteria. Command aborted.%n
135	1Converting Desktop-library.binary to %s%n
136	1Converting release 2.3 entries in %s ... %n
137	1No release 2.3 entries found in %s ...%n
138	1Converting release 2.4 entries in %s ...%n
139	1No release 2.4 entries found in %s ...%n
140	1Conversion complete.%n
141	1Scanning the library for entries to be converted ...%n
142	1Done.%n
143	1Problems encountered writing information to %s.%n
144	1Converting Desktop-library.binary %s%n
145	1Please confirm this conversion of Desktop-library.binary.%n
146	1Do you want Desktop-library.binary converted to %s ?%n
147	1Removal complete.%n
148	1Entry %u has been removed.%n
149	1The Starting Shape Id must be greater than 0 to use default shapes.%n
150	1This is the begining of abbreviation messages
151	1%s created.%n
152	1Creating an empty abbreviations file for %s.
153	1Converting old format abbreviation file.%n
154	1%s refers to a non-existent ID: %u. Ignored.%n
155	1%s%n
156	1There is no library for this abbreviation file.%n
157	1There is no abbreviations file for %s.%n
158	1Time stamp mismatch between %s %t and it's abbreviation file %t.%n
159	1Reading the abbreviations file ...%n
160	1Done.%n
161	1Please confirm for validating the abbreviations!%n
162	1%s has been used for ID %u! Ignored.%n
163	1%s can't be checked for abbreviation and it is not a plausible symbol id!%n
164	1%s is not an abbreviation and it is not a plausible symbol id!%n
165	1%s already is an abbreviation for %u so it will not be merged.%n
166	1%s was already an abbreviation for %u but will now be an abbreviation for %u.%n
167	1Loading the abbreviations for %s.%n
168	1No abbreviations are available. Confirm to bundle an empty abbreviations map.%n
169	1The abbreviations file %s is not available at this time. Unable to determine the abbreviations.%n
170	1The abbreviations which meet the selection criteria have been listed%n
171	1Validating the abbreviations ...%n
172	1Done.%n
173	1A validation of the abbreviations is required in order to bundle them into the converted library.%n
174	1Confirm to bundle these abbreviations into the library. The conversion will proceed either way.%n
175	1Time stamp mismatch between the abbreviations file %t and the library %t.%n
176	1Bundling the abbreviations ...%n
177	1Bundling complete ...%n
178	1Validating the abbreviations ...%n
179	1Validation complete.%n
180	1Confirm bundling the abbreviations from  AbbreviationMap.$Teton%n
300	1This is the begining of partMap messages
301	1%s created.%n
302	1Creating an empty packaging file for %s.
303	1Ignoring packaging information for non-existent ID: %u%n
304	1Converting packaging file with obsolete format ... %n
305	1There is no library for this packaging information!%n
306	1There is no packaging file for %s.%n
307	1Time stamp mismatch between packaging file %t and library %t.%n
308	1Part %u is not in the library.%n
309	1Unable to locate separating colon.%n
310	1part ID expected but instead found: %s.%n
311	1%s is not a valid device parameter for symbol %u.%n
312	1Symbol %u cannot be placed in site %u of part %u due to pin type mismatch.%n
313	1Symbol %u cannot be placed in site %u of part %u due to swap code mismatch.%n
314	1Symbol %u cannot be placed in site %u of part %u because the swap codes and the pin types don't match.%n
315	1Symbol %u cannot be placed in site %u of part %u because there are more pins in the symbol than in the site.%n
316	1Symbol %u doesn't match any of the sites in part %u.%n
317	1Part %u can contain symbol %u.%n
318	1Part %u can NOT contain symbol %u.%n
319	1Part %u is not in the library.%n
320	1Symbol %u is not in the library.%n
321	1Validating the packaging information against the library ...%n
322	1Reading the packaging file ...%n
323	1Done.%n
324	1Saving validated packaging information ...%n
325	1 Please confirm it!%n
326	1Time stamp mismatch between the packaging file %t and the library %t.%n
327	1Please confirm for validating the packaging file!%n
328	1Part %u can't be used for packaging.%n
329	1Part ID is missing in specified packaging rules!%n
330	1The Packaging rules were in wrong order! Unqualified part(s) will be moved after the qualified part(s).%n
331	1Unqualified part(s) will be entered after the qualified part(s).%n
332	1Removing %s from the packaging rules.%n
333	1Part %u can't be read due to a library internal error!%n
334	1Loading the packaging rules for %s.%n
335	1The packaging file %s is not available at this time. Unable to determine packaging information.%n
336	1No packaging rules are available. Confirm to bundle an empty packaging map.%n
337	1The packaging rules which meet the selection criteria have been listed%n
338	1A validation of the packaging rules is required in order to bundle them into the converted library.%n
339	1Confirm to bundle these packaging rules in the converted library. The conversion will proceed either way.%n
340	1Bundling the packaging rules into %s.%n
341	1Bundling the packaging rules ...%n
342	1Bundling complete.%n
343	1Validating the packaging rules ...%n
344	1Validation complete.%n
345	1Confirm bundling the packaging rules from PartMap.$Teton.%n
451	1Comparing %s %t to %s %t ...%n
452	1  facet: %s and properties:%n
453	1   %s;%n
454	1  object type: %s, facet: %s, property: %s;%n
455	1No difference found!%n
456	1 Found with different definition in %s:%n
457	1 Found only in %s:%n
458	1No name specified! Please fill in the 'against' dictionary and try again.%n
459	1Confirm to create a new file%n
460	1Confirm to SAVE your edits%n
461	1There is already a property with that name: %s.%n
462	1No matching property found.%n
463	1Please specify a facet name for the property.%n
464	1Please specify a name for the property.%n
465	1REMINDER: You haven't specified any values.%n
466	1INTEGER value expected but instead found %s%n
467	1Can't find the opening bracket required for array value!%n
468	1The closing bracket is required but not found!%n
469	1Can't find the number of size on array!%n
470	1Can't find the value array!%n
471	1Can't find the opening bracket required for the array!%n
472	1The actual array has less than %d elements!%n
473	1The actual array has more than %d elements!%n
474	1LONG INTEGER value expected but instead found %s!%n
475	1Can't find the opening quote required for String value!%n
476	1Can't find the closing quote required for String value!%n
477	1BOOLEAN value expected but instead found %s!%n
478	1%s...parsed.%n
479	1%s expected but instead found %s!%n
480	1Only %s parsed! Please check the rest of the expression.%n
481	1Facet: %s cannot be found in the specified Instance!%n
482	1Property: %s cannot be found in the specified Facet!%n
483	1%s:%s has a Type other than Integer or Boolean!%n
484	1%c is an illegal character!%n
485	1%s cannot be used in the expression!%n
486	1Can't parse the expression! Please check it and try again!%n
487	1A property is found with no value!  Please check the expression and try again!%n
488	1A '0' is found to be used for division illegally!  Please check the expression and try again!%n
489	1The low end value of the range is greater than the high end value.  Apply aborted.%n
490	1No Range is found! Please fill in the values OR leave them blank for using the system's DEFAULT.%n
491	1The value is not in the specified Range! Please correct it and try again.%n
492	1The value: %d is not in the specified Range! Please correct it and try again.%n
493	1The string length is not in the specified Range! Please correct it and try again.%n
494	1The string length of %s is not in the specified Range! Please correct it and try again.%n
495	1The value of %s is not in the specified range! Please correct it and try again.%n
496	1The value: %d in %s is not in the specified range! Please correct it and try again.%n
497	1The string length of %s is not in the specified Range! Please correct it and try again.%n
498	1The string length of %s in %s is not in the specified Range! Please correct it and try again.%n
499	1Must finish editing before continuing.%n
500	1Cannot bring up two property sheets at once.%n
501	1Empty dictionary can not be closed. Command aborted.%n
502	1Confirm to CLEAR the windows%n
503	1System.lib required but not found! Command aborted.%n
504	1The installed dictionary for %s has no "System" facet to use as a default dictionary. Command aborted.%n
505	1%s has no installed dictionary to use as a default dictionary. Command aborted.%n
506	1'%s' is an invalid facet name!%n
507	1This window cannot be deactivated. Try Abort!%n
508	1You must close the existing Dictionary Defaults Sheet window first%n
509	1LONG CARDINAL value expected but instead found %s.%n
510	1Library %s is unavailable at this time.%n
511	1There is another operation in progress. Please try again after completing it.%n
512	1%s is not a valid ".upd" file.%n
513	1There is no installed dictionary to extract.%n
514	1The installation did not succeed.%n
515	1Please specify a library.%n
516	1There is no such facet.%n
517	1The Apply! did not succeed due to an internal error.  Try again later.%n
518	1Please specify a file with extension ".upd"%n
519	1Please specify a facet%n
520	1The %s property has been added to the %s facet.%n
521	1The %s property has been removed from the %s facet.%n
522	1The %s property has been edited.%n
523	1Please specify an object type for the property.%n
524	1Please use only alphanumeric characters in the facet name.%n
525	1Please use only alphanumeric characters in the property name.%n
526	1A %s instance has no value for the %s property in the %s facet.%n
527	1A division by zero occured while evaluating an expression for a %s instance.%n
528	1Installing ...%n
529	1Installation complete%n
530	1The properties in this expression: %s are incompatible.%n
531	1You can not use long cardinal value types together with integer or long integer value types in the same expression.%n
532	1Installing %s into %s.%n
533	1Use the Load! command to properly reference %s.%n
534	1%s is currently the loaded library.%n
535	1Please select a facet.%n
999	1This message is put in to keep MsgImpl from reading off the end of the file looking for the last message.