0 1Drafting.msgs - last edit: Nash 26-Feb-86 16:28:06 2000 1The angles between these two lines are %r, %r.%n 2001 1The angle of inclination between these points is %r.%n 2002 1Use the mouse to indicate the angle to be measured and the dimension text position.%n 2003 2The points defining this arc are: center:%p, start: %p, stop: %p.%n%e%e%e%e|The points defining this arc are: center: %p, start: %p, stop: %p, left: %p, right: %p, top: %p, and bottom: %p.%n 2004 1%s arc on layer %s has its center at %p, radius at %r, and goes from point %p (or %r) to %p (or %r), with an arc length of %r, at a scale of %r 2005 1Use the mouse to show the arrow's angle.%n 2006 1Use the mouse to show where you want the arrowhead.%n 2007 1These are improper grid parameters.%n 2008 1An error exists in the bounding box.%n 2009 2A breakline object was substituted.%e%e%n|A %s breakline object on layer %s was substituted for:%n 2010 2The circle's defining point is its center: %p.%n%e%e%e%e|The points defining this circle are: center: %p, left: %p, right: %p, top: %p, and bottom: %p.%n 2011 1%s circle on layer %s has its center at %p and a diameter of %r, with a circumference of %r, at a scale of %r.%n 2012 1Another serious conic bug.%n 2013 1%s ellipse on layer %s has its center at %p, a major radius of %r,%n a minor radius of %r, at an angle of %r from %p to %p, at a scale of %r.%n 2014 2%eA hyperbola with center at %p.%n%e%e%e|A %s hyperbola has its center at %p, with its clockwise asymptote at angle %r,%n its counter clockwise asymptote at angle %r and a slackness of %r.%n 2015 1The hyperbola's defining points are: center: %p, start: %p, stop: %p.%n 2016 2%e A parabola with center at %p.%n%e%e%e%e%e|A %s parabola%e has its center at %p, an axis angle of %r,%n an axis scale of %r and goes from %p to %p.%n 2017 1The parabola's defining points are: center: %p, start: %p, stop: %p.%n 2018 1Copy bug.%n 2019 2The points defining this ellipse are: center: %p, start: %p, stop: %p.%n%e%e%e%e|The points defining this ellipse are: center: %p, start: %p, stop: %p, left: %p, right: %p, top: %p, and bottom: %p.%n 2020 1The dash pattern for %s line style (Pen No: %d) is: arg1: %d, arg2: %d, arg3: %d, arg4: %d, arg5: %d, arg6: %d,%n with a thickness of %d.%n 2021 1%s dimension on layer %s, at a scale of %r.%n 2022 1The distance between the center of the curves is %r.%n 2023 1The distance between the line and the center of the curve is %r.%n 2024 1The distance between these two parallel lines is: %r.%n 2025 1The distance between the point and center of the curve is %r.%n 2026 1The distance between the point and the curve is %r.%n 2027 1The distance between the point and line is %r.%n 2028 1The distance between the two points is %r.%n 2029 1Page size: left: %r, right: %r, top: %r, bottom: %r.%n 2030 1Page size: %s.%n 2031 2The point defining this ellipse is: center: %p.%n%e%e%e%e|The points defining this ellipse are: center: %p, left: %p, right: %p, top: %p, and bottom: %p.%n 2032 1%s ellipse on layer %s has its center at point %p, with major radius of %r%n and minor radius of %r, at a scale of %r.%n 2033 2The endpoints are too close together.%n%e%e|Arc at %p with radius of %r has endpoints that are too close together.%n 2034 2%s fill type.%n%e%e%e%e|The fill pattern for a %s fill type is: arg1: %d, arg2: %d, arg3: %d, arg4: %d,%n 2035 2%e%e%e%e| arg5: %d, arg6: %d, arg7: %d, arg8: %d,%n 2036 2%e%e%e%e| arg9: %d, arg10: %d, arg11: %d, arg12: %d,%n 2037 2%e%e%e%e| arg13: %d, arg14: %d, arg15: %d, arg16: %d.%n 2038 2Finger number %s%e%e.%n|Finger number %s is located in connector %s on layer %s.%n 2039 2%s grid named %s.%n%e%e%e%e|%s grid named %s on layer %s has its origin at %p, with an X-spacing of %r%n and a Y-spacing of %r.%n 2040 2Negative radii aren't allowed.%n|Improper ellipse parameter--negative radii aren't allowed.%n 2041 2Improper parabola.%n%e%e%e|Improper parabola is centered at %p, with an axis angle of %r, and scale of %r.%n 2042 1, %d 2043 1The intersection point is at %p.%n 2044 1The intersection points are: 2045 1The points defining this line are: start: %p, stop: %p.%n 2046 2%s%e line passes through points %p and %p.%e%e%e%e%n|%s line on layer %s starts at point %p and stops at point %p with angles to the horizontal %r, %r, with a length of %r, at a scale of %r.%n 2047 2%s%e line passes through points %p and %p.%n%e%e%e|%s line on layer %s, unlimited in both directions, passes through points %p and %p with angles to the horizontal %r, %r, at a scale of %r.%n 2048 2%s%e line passes through points %p and %p.%n%e%e%e|%s line on layer %s, unlimited in the start direction, passes through point %p and stops at point %p with angles to the horizontal %r, %r, at a scale of %r.%n 2049 2%s%e line passes through points %p and %p.%n%e%e%e|%s line on layer %s, unlimited in the stop direction, starts at point %p and passes through point %p with angles to the horizontal %r, %r, at a scale of %r.%n 2050 1%s has no properties.%n 2051 1This line and curve don't intersect.%n 2052 1These curves don't intersect.%n 2053 2The object(s) fall outside the drawing format.%n|The object(s) you created fall outside the drawing format; either delete them or modify your page size.%n 2054 1The page numbers for this drawing are: 2055 1Part number %s on layer %s.%n 2056 1.%n 2057 1 %p, 2058 1This point is located at %p.%n 2059 2%ePoint at %e%p%e.%n|This %s point on layer %s is located at %p, at a scale of %r.%n 2060 2A %s filled area%e spans from %r to %r in X and %r to %r in Y.%e%n|%s filled area on layer %s spans from %r to %r in X and %r to %r in Y, at a scale of %r.%n 2061 1%s has the following properties:%n 2062 1 %s %s.%n 2063 2A line cannot be a single point.%n%e|A line cannot be a single point at %p.%n 2064 1Shape ID %s on layer %s.%n 2065 2Negative value disallowed.%n|A negative value appears in the Style command window; the earlier value was used.%n 2066 2Drawing number %s: author: %s.%e%e%e%n|The attributes of drawing named %s include: author: %s, number of elements: %d,%n last edit date: %s, creation date: %s.%n 2067 1Use the mouse to indicate an angle from the center where the text should appear.%n 2068 1Use the mouse to show where the text should appear.%n 2069 1This text starts at %p.%n 2070 1This text field starts at %p.%n 2071 1A text field on layer %s located at %p rotated by angle %r has a width of %r and a height of %r. The %r %s text has contents "%s", at a scale of %r.%n 2072 1The text won't fit between extension lines.%n 2073 1A %r %s text on layer %s located at %p rotated by angle %r has contents "%s", at a scale of %r.%n 2074 1Use the mouse to indicate the side where the text should appear.%n 2075 1The text won't fit inside; use the mouse to indicate an outside location.%n 2076 2That unbounded object is not allowed.%n|You cannot create an unbounded object with the Forms Design feature on.%n 2077 2Outline is open.%n|This filled area outline is not closed.%n 2078 1Bad command index.%n 2079 1Bad text field in CreateTextField.%n 2080 2All edges must share a class.%n|All the edges of the text field box must share a class name.%n 2081 1%s not yet implemented.%n 2082 1All these lines must be orthogonal.%n 2083 2Use lines only for the box.%n|Use only lines when creating a text field bounding box.%n 2084 2Four sides required.%n|All text field bounding boxes must have four sides.%n 2085 1This filled area object is not allowed.%n 2086 1All unbounded arcs should be circles.%n 2087 1The system cannot unlimit this object.%n 2088 2Unknown object.%n|Unknown object--no description is possible.%n 2089 2Zero-radius arcs aren't permitted.%n%e|The arc at %p cannot have a radius of 0 or less.%n 2090 2Improper diameter.%n%e|The circle at %p cannot have a diameter of 0 or less.%n 2091 2%s written to disk.%n|%s has been written to the local disk.%n 2092 1converted to %s format... %s written to disk... 2093 2%s written to disk.%n|%s has been written to the local disk.%n 2094 1The system created %s from %s.%n 2095 1Expert converted %s to IGES file %s.%n 2096 1%s has been written to the local disk.%n 2099 1Drawing text truncated to MaxChars.%n 2100 1%s is not in Expert format.%n 2101 1PFileImpl -- unknown object.%n 2102 1%s file has been read.%n 2103 1%s was not found.%n 2104 1This file contains a bad object.%n 2105 1The shape has been read.%n 2106 1Expert found no power layer.%n 2107 1Expert found no ground layer.%n 2109 1%s is not a valid real.%n 2110 1No drawings.%n 2111 1Testing %s with length = %r and rep. factor = %d and line type = %s.%n 2112 1 RESULTS: Total, Overhead, Drawing%n Total time usec: %d %d %d%nAverage time used: %r %r %r%n Inches per sec: %r %r%n 2113 1Expert found an improper text graphic object.%n 2114 1Design rules table: row #%d, column: #%d cannot be zero.%n 2115 1%s table is empty.%n 2116 1Aperture for etch #%d is not a valid aperture number.%n 2117 1Assign a name to layer #%d first.%n 2118 1Aperture table: aperture #%d must be bounded by a circle or a square.%n 2119 1The entry in Pad Stacks for Part Pins (Aperture to connect) Table:%n pad stack #%d, layer #%d should be blank.%n 2120 1Pad Stacks for Part Pins (Aperture to connect) Table:%n pad stack #%d, layer #%d shows an incorrect aperture number (not found in the Aperture Table).%n 2121 1Pad Stacks for Part Pins (Aperture not to connect) Table:%n pad stack #%d, layer #%d shows an incorrect aperture number (not found in the Aperture Table).%n 2122 1The entry in Pad Stacks for Part Pins (Aperture not to connect) Table:%n pad stack #%d, layer #%d should be blank.%n 2123 1Pad Stacks for Vias (Aperture to connect) Table:%n etch rule #%d, layer #%d shows an incorrect aperture number (not found in the Aperture Table).%n 2124 1The entry in Pad Stacks for Vias (Aperture to connect) Table:%n etch rule #%d, layer #%d should be blank.%n 2125 1Pad Stacks for Vias (Aperture not to connect) Table:%n etch rule #%d, layer #%d shows an incorrect aperture number (not found in the Aperture Table).%n 2126 1The entry in Pad Stacks for Vias (Aperture not to connect) Table:%n etch rule #%d, layer #%d should be blank.%n 2127 1The Trace Table and Clearance Table need the same number of etch rules.%n 2128 1The %s table must be dense.%n 2129 1The %s table entries cannot be zeroes.%n 2130 1A board requires at least one vertical and one horizontal layer.%n 2131 1There must be one etch rule in the Pad Stacks for Vias %n (Aperture to connect) Table for each etch.%n 2132 1The row number is out of range [0..%d].%n 2133 1The Expert table is too large.%n 2134 1Wrong property.%n 2135 1Incorrect property.%n 2136 1Improper text field graphic object.%n 2137 1Specify a file name first.%n 2138 1Improper text.%n 2139 1Valid choices are missing.%n 2140 1Specify a class name first.%n 2141 1An argument is missing.%n 2142 1The text field is not bounded on the %s.%n 2143 1The offset value for that field places it outside its bounding box.%n 2144 1A text field cannot be placed on a line.%n 2145 1Unknown error--RaftImplA.Fail.%n 2146 1Rectangle error.%n 2147 1No box.%n 2148 1All clustered edges must share one style.%n 2149 1This edge is not associated.%n 2150 1The coordinates fall outside the board's bounding box.%n 2151 1That action doesn't apply to %s.%n 2152 1Select a point for this circle to pass through.%n 2153 1The object selected must be a point.%n 2155 1The point lies on the object.%n 2156 1Geometry bug.%n 2157 1The objects lie too far apart.%n 2159 1No circle.%n 2161 1No arc.%n 2162 1Use the mouse to select the arc's most clockwise point.%n 2163 1Use the mouse to select the center point.%n 2164 1Endpoints must be equidistant from the center.%n 2165 1Use the mouse to select the arc's starting point.%n 2167 1Use the mouse to select a circle to keep.%n 2168 1The selected object was not among those created; select again.%n 2169 1This action assumes that you issued a previous corner command.%n 2170 1The radius must be a positive value.%n 2171 1The length must be a positive value.%n 2172 1Select inside a quadrant.%n 2173 1No intersection occurs.%n 2174 1Improper corner request.%n 2175 1CommandImplC.Chamf - OOPS!!%n 2176 1You cannot unlimit this object.%n 2177 1You cannot unlimit a %s.%n 2178 1Not a tangent.%n 2179 1The system is constructing a line midway between the two parallel lines.%n 2180 1The fillet radius is too large.%n 2181 1No intersection point exists.%n 2182 1There are too many intersection points here to create them all.%n 2184 1You cannot trim a circle with one intersection point.%n 2185 1There are not enough labels.%n 2186 1You checked for this earlier.%n 2187 1There are more than two intersection points per object.%n 2188 1There is no intersection point with one of the objects.%n 2189 1Unknown type for %s.%n 2190 1No choices exist.%n 2191 1Use the mouse to select the approximate midpoint of the interval you wish to keep.%n 2192 1The starting and stopping points may not coincide for this command.%n 2193 1The label selection does not cover ref.%n 2194 1The system canceled the request, since the line would disappear.%n 2195 1The interval defined by the objects is too small.%n 2197 1%s bug.%n 2198 1This action required an illegal object. All legal objects have been created.%n 2199 1The system cannot trim that kind of object.%n 2200 1The text is off the arc.%n 2201 1That's a leaky box.%n 2202 1This dimension is too close to the angle origin.%n 2203 1The curved arrow is too short.%n 2204 1Improper text justification.%n 2205 1Select an endpoint, the center point or a tangent point on the object.%n 2206 1Select an endpoint, the center point or a tangent point on either object.%n 2207 1The system cannot tell which object the point is on; try another object.%n 2208 1Select an endpoint, the center point or a tangent point on the other object.%n 2209 1You cannot apply linear dimensions to an unbounded line.%n 2210 1Select a line parallel to the desired dimension angle.%n 2211 1The selected object must be a line; try again.%n 2212 1Choose a point on the object.%n 2213 1Improper part.%n 2214 1That action isn't allowed here.%n 2215 1The note was created before Release 1.5 and cannot be changed.%n 2216 1DimImplB.DeduceBoxStyle failed.%n 2217 1This board is already valid.%n 2218 1Improper aperture number.%n 2219 1To validate a blank board, page number %d must be visible.%n 2221 1%s is not closed.%n 2222 1Check for an improperly created finger or a duplicate finger number: %s%n in connector %s.%n 2223 1%s does not exist.%n 2224 1%s extends outside the board outline.%n 2225 1A part location extends outside the placement area.%n 2226 1A channel extends outside the placement area.%n 2227 1No %s grid exists.%n 2228 1This board is valid.%n 2229 1This is not a closed, clustered rectangle.%n 2230 1The rectangle's lines must share one line style.%n 2232 1The selection must be either one cluster or no clusters at all.%n 2233 1Bad object.%n 2234 1That is the wrong selection for making a finger.%n 2239 1Bad .df file.%n 2240 1This channel is not orthogonal; delete and recreate it.%n 2241 1This channel is not a line.%n 2243 1Expert requires lines and arcs in the board outline.%n 2244 1This object has no center.%n 2245 1The two circles are equal.%n 2246 1The two lines are equal.%n 2247 1Closest point should not have been called.%n 2248 1Closest line should not have been called.%n 2249 1No tangent circle exists.%n 2250 1Both points must lie on the same side of the line.%n 2251 2Concentric circles.%n|The circles are concentric.%n 2252 1The points are too close together.%n 2253 1The two circles overlap.%n 2254 1No tangent lines exist.%n 2255 1You cannot perform this action as requested.%n 2256 1There are too many lines tangent to 3 circles to create them all.%n 2257 1First argument may not be a pseudo-point.%n 2258 1GeometryImplB.Circle3Points-data corruption!%n 2259 1The center is not equidistant from the two parallel lines; no solution exists.%n 2260 1No solution exists.%n 2261 1The scale coefficient is wrong.%n 2262 1Bad point.%n 2263 1The midpoint is undefined for an unbounded line.%n 2264 1Endpoints are undefined for an unbounded line.%n 2265 1Select an endpoint from which to measure the length.%n 2266 1No points?%n 2267 1The intersection request handles only two or three trajectories.%n 2268 1These trajectories don't intersect.%n 2269 1The point must be on the trajectory.%n 2270 1Bad line.%n 2271 1The points you indicate are too close together.%n 2272 1No tangent line exists.%n 2273 1These are concentric curves.%n 2274 2Making photoplot drawings.%e%n|Expert is making photoplot drawings for %s.%n 2275 2Making checkplot.%e%n|Expert is making a checkplot for %s.%n 2277 1The system found an inadmissible zero-length etch.%n 2278 1The system found an etch with an illegal layer.%n 2279 2Expert encountered incompletes.%e%e%n|The system found %d global incompletes and %d etch incompletes.%n 2280 1The system cannot find the intersection of %s.%n 2281 1AlongObject takes only one object as a selection.%n 2282 1The point is not on the object.%n 2283 1You cannot go along a point.%n 2284 1The test for a point on %s is not yet implemented.%n 2285 1The distance between %s feature is not yet implemented.%n 2286 1There is no midpoint for %s.%n 2287 1There are no endpoints for %s.%n 2288 1There are no endpoints for %s unbounded both ways.%n 2289 1There are too many endpoints in %s.%n 2290 1You cannot make a line tangent to %s.%n 2291 1You cannot find a tangent circle for %s.%n 2292 1This operation is undefined.%n 2293 1The selected point cannot be the circle's center.%n 2294 1There is no tangent to a point.%n 2295 1The system was unable to open the IGES input file - %s.%n 2296 1%s truncated to 80 characters.%n 2298 1Entity number mismatch %s.%n 2305 1Unknown entity type in the Expert file.%n 2306 1The system cannot open %s.%n 2307 1Model 6000 does not support the %s code.%n 2308 1Model 6000 only supports linear interpolation.%n 2309 1Only model 4000 supports the %s code.%n 2311 1Use the mouse to indicate on which side of the profile the image is to be generated.%n 2312 1Indefinite location selected. Please try again.%n 2313 1These objects are not yet implemented by this command.%n 2314 1There is a break or branch in profile contiguity.%n 2315 1You are trying to trim to the center.%n 2316 1Image offset value is too large.%n 2317 1Image Profile only one circle. Other objects, including another circle, cannot be selected.%n 2318 1Zero value is not allowed.%n 2319 1Grid spacing less than %r is not allowed.%n 2320 1Object selected to start image is not contiguous with selected profile.%n 2321 1Cannot use this command for unlimited lines.%n 2331 1Box on layer %s at %p with Height %r and Width %r, at a scale of %r.%n 2332 1The corner points of this Box are: %p, %p,%n %p, %p.%n 2333 1Rectangle cannot be constructed.%n 2334 1Select a point for the object(s) to stretch to.%n 2335 1Select a point on the object to be stretched, e.g an endpoint, a middle point (for middle area stretch) or a point on the circumference of a circle.%n 2336 1Select point on circumference which needs to be displaced.%n 2337 1The object must be selected, try again.%n 2338 1The object must not be selected, try again.%n 2339 1This will no longer be a box but a collection of clustered lines.%n 2340 1Stretch applies to an arc, a circle, or line(s) only.%n 2341 1You cannot create an object with all dimensions zero.%n 2342 1The distance between the line and the circumference of the circle is %r.%n 2343 1%n Graphics frame properties or Document properties has an argument(s) which is too large.%n 2344 1Illustration for %s, page: %d... 2345 1valid illustrator operations.%n 2346 1Write protection status not defined for this command.%n 2347 1The following properties have been added to all the selections.%n 2348 1 Property %s can not be added since it has no value.%n 2349 1The following properties have been deleted from all the current selections.%n 2350 1Expert has redefined only the %s pattern of the linestyle (or area style).%nThe %s pattern was not changed and must be altered separately.%n 2351 1Lines with zero or negative widths not allowed.%n 2361 1That action requires special access; see your System Administrator.%n 2362 1The pins must be numbered consecutively beginning at 1. Pin %d is the highest numbered pin selected, and the following pin(s) are missing from the selection: #%s.%n 2363 1Drawing place is bad.%n 2364 1Place route file has old format; please convert.%n 2366 1You cannot project dimensions.%n 2367 1Isometric rotate bug.%n 2368 1Layer number %d is not a valid layer. Found in the Show Traces Table, row %d.%n 2369 1Layer number %d is not a valid layer. Found in the Show Design Rule Violation Etch Table, row %d.%n 2370 1Layer number %d is not a valid layer. Found in the Show Pads Table, row %d.%n 2371 1Incorrectly formatted dimension object(s) were found on this page. The geometry and text has been clustered and left selected.%n 2372 1Cannot have more than 8 text fields in a dimension note.%n 2373 1Cannot have more than 4 text fields in a partitioned circle note.%n 2374 1You cannot project this object.%n 2375 1the plotter is offline... 2376 1There are already sixteen scales in this drawing.%n 2377 1This operation is not valid for all layers.%n 2378 1Another layer already exists with that name.%n 2379 1Can not delete all layers.%n 2380 1Can not delete the current layer.%n 2381 1Layer %s %s protected, %s visible and has a color of %s.%n 2382 1This layer still contains objects.%n 2383 1Can not put objects on a protected layer.%n 2384 1The selection must be on the same layer.%n 2385 1The selection must be at the same scale.%n 2386 1Invisble objects have been created.%n 2387 1Open triangle on layer %s has its head at %p, and tails at %p and %p, at a scale of %r.%n 2388 1Outline triangle on layer %s has its head at %p, and tails at %p and %p, at a scale of %r.%n 2389 1%s filled triangle on layer %s has its head at %p, and tails at %p and %p, at a scale of %r.%n 2390 1Objects created are invisible in the current view.%n 2391 1Objects created are on a protected layer.%n 2392 2Shape %u not found.%n|Shape %u was not found in the library.%n 2393 1Use the mouse to write the new shape.%n 2394 1Use the mouse to overwrite the old shape.%n 2395 1You have more than one point selected. You may only create one part pin at a time.%n 2396 1You have not yet selected a point representing a pin.%n 2397 1Validating the part...checking identification... 2398 1checking geometry... 2399 1Writing the part to %s... 2400 1Part ID %u has been successfully written to %s. Its associated silkscreen ID is %u. Its associated part shape ID is %u.%n 2401 1acquiring %s... 2402 1Pin number one must be placed at the origin (0,0).%n 2403 1You have more than one pin selected. You may only read one part pin at a time.%n 2404 1A part must have either a silkscreen or a part shape.%n 2405 1Pin identified as: %s is outside its part bounding box.%n 2406 1This operation would require more than %u scales in this drawing.%n 2407 1This operation would require more than %u layers in this drawing.%n 2408 1Cannot open the library %s.%n 2409 1Display bug encountered in line display code.%n 2410 1Cannot read a part of id %u.%n 2411 1Cannot read a shape of id %u.%n 2412 1Cannot write a part of id %u.%n 2413 1Cannot write a shape of id %u.%n 2414 1The lines making up the bounding box of a part cannot have unbounded endpoints.%n 2415 1Nothing selected will permit projection.%n 2416 1invalid page number... 2417 1That page number is not available for this drawing.%n 2418 1the system cannot find this window... 2419 1Multi-page plot files are not implemented; only one page of the file was written to disk.%n 2420 1Hold down the left mouse button while dragging.%n 2421 1Hold down the left mouse button while pivoting.%n 2422 1There is no such page for this drawing.%n 2423 1You cannot delete a page that is currently in a view.%n 2424 1The distance to (X,Y) for a hyperbola cannot be less than 0.02.%n 2425 1Distance from focal point to (X,Y) for a parabola cannot be less than 0.0001.%n 2426 1Try a different cutting object.%n 2427 1The system cannot trim to this object.%n 2428 1The system cannot create the requested filled area.%n 2429 1You cannot zoom by a factor of zero.%n 2430 1%s has %d objects.%n 2431 1A location pin is off the part grid.%n 2432 1You can't make an overview of the Commands window.%n 2433 2Select the new center point.%n|Use the mouse to select the new center point.%n 2434 2Version mismatch - convert your design and try again.%n|Your design has an old format. Convert it to the new format and try again.%n 2435 1An aperture could not be found for etch of width %u.%n 2436 1%s extends outside the placement area.%n 2437 2Select a drawing to erase changes.%n|Position the cursor over a drawing and press the left mouse button to erase changes.%n 2438 2Select a view.%n|Position the cursor over a view and press the left mouse button.%n 2439 2Select a page.%n|Position the cursor over a page and press the left mouse button.%n 2440 2Select a drawing.%n|Position the cursor over a drawing and press the left mouse button.%n 2441 2File already exists.%e%n|The file %s already exists - choose another name.%n 2442 2You cannot destroy the last view of a drawing.%n|You cannot destroy the last view of a drawing - use the "Erase and close" command.%n 2443 2Select a view to save changes.%n|Position the cursor over a view and press the left mouse button to save changes.%n 2444 1Expert found an improper conic graphic object.%n 2445 1Could not validate the part.%n 2446 1Cannot update the packaging rules that reference the part.%n 2447 1You cannot deactivate a Drafting window - use the Destroy view command.%n 2448 1Cannot update the abbreviation map.%n 2449 2IGES text too big.%n|IGES text is too big - using 50 inch text instead.%n 2450 1Shape with ID %u on layer %s.%n 2451 1Component shape with ID %u on layer %s.%n 2452 1Mechanical library part with ID %u on layer %s.%n 2453 1The hyperbola's defining points are: center: %p, start: %p.%n 2454 1The hyperbola's defining points are: center: %p, stop: %p.%n 2455 1The hyperbola's defining point is: center: %p.%n 2456 1The parabola's defining points are: center: %p, start: %p.%n 2457 1The parabola's defining points are: center: %p, stop: %p.%n 2458 1The parabola's defining point is: center: %p.%n 2459 1Clustered objects cannot be cornered.%n 2460 1%d 2461 1PlotGKSConic called with a non-conic.%n 2462 1Extreme not between start and stop point of conic.%n 2463 1Eccentricity is not within valid range.%n 2464 1Incorrect number of break points for an ellipse.%n 2465 1Unable to find quadrant for conic endpoint.%n 2466 1Unrecognized %s object in object size calculation.%n 2467 1A drawing may not contain more than %d layers.%n 2468 1Unable to find plotter stream.%n 2469 1That method of output is not enabled.%n 2470 1A layer name may not have more than 32 characters. Please choose a shorter name.%n 2481 1Your Expert disk is full. Delete unneeded files and try again.%n 2482 1Cannot create a pin with no name.%n 2483 1The selection for a shape must be contained in a box +- %r. This object extends outside of that box.%n 2508 2Confirm to write a new file.%e%n|%s doesn't exist yet; press the left mouse button to write the new file.%n 2509 2Confirm to overwrite the old file.%e%n|%s already exists; press the left mouse button to overwrite the old file.%n 2510 1There should be one etch rule for each etch in the Pad Stacks for Vias (Not to connect) Table.%n 2511 1The two Pad Stacks for Part Pins Tables must contain the same number of rows.%n 2512 1All site numbers must be numbered sequentially.%n 2513 2Point at %e%e%p%e.%n|This %s point on layer %s is located at %p, at a scale of %r.%n 2514 2The system found an error while reading the IGES file.%e%e%n|The system found an error while reading the IGES file: %s, %s.%n 2515 1The system found an IGES property without a corresponding graphic object.%n 2516 1You cannot change the board outline or grids when revalidating a board.%n 2517 1Connector %s cannot be changed; it has routing connected to it.%n 2518 2Too many styles in checkplot.%n|This checkplot needs too many different line and point styles; some will not appear correctly.%n 2519 2Too many styles in photoplot.%n|This photoplot needs too many different line and point styles; some will not appear correctly on your display, but film will not be affected.%n 2520 1Something is wrong with the blank library listing.%n 2521 1This command is not yet implemented for %s.%n 2522 1Click the left mouse button to continue.%n 2523 1Relative description completed.%n 2524 2Hold down left mouse button to create. Click right mouse button to terminate.%n|Hold down the left mouse button to create a rubberbanding line. Release to place the line. Repeat until done. Click the right mouse button to terminate.%n 2525 1The new page size is the extent of the finite geometry multiplied by a factor of %r.%n 2526 1Text fields on this page are now selectable.%n 2527 1The type-in string below has conflicting unit information. The arrow points near the problem.%n 2528 1The type-in string below is not a valid real number. The arrow points near the problem.%n 2529 1 %s%n 2530 1The current index point is %p.%n 2531 1An ellipse with both radii so small cannot be created.%n 2532 1You cannot dissect clustered objects.%n 2533 1accelerators... 2534 1aborted.%n 2535 1Checking parameters... 2536 1sending plot... 2537 1rotating drawing... 2538 1Plot of %s, page: %d... 2539 1valid plotting operations.%n 2540 1done.%n 2541 1Select an endpoint, the center point or an extreme point on the object.%n 2542 1Press and hold the left mouse button over one corner; then continue to hold it while drawing through to the opposite corner.%n 2543 1Area(s) without closed boundaries were found on this page. The boundaries have been clustered and left selected.%n 2544 1Use the mouse to select an arc to keep.%n 2545 1Reading page %d...%n 2546 1There are object(s) on this page that fall outside the drawing format. Either your page size is inappropriate or the objects should be deleted.%n 2547 1Page size: left: %r, right: %r, top: %r, bottom: %r. Page %d has been read.%n 2548 1Some of the dimension styles of the drawing read in are different from the previous settings. These settings have been updated to the values read in and are reflected in the Dimension and Tolerance style command windows.%n 2549 1Drawing will be captured at the indicated scale. Click the left mouse button to confirm; click the right mouse button to terminate... 2550 1This length is too short and would produce an illegal object.%n 2551 1You cannot create a breakline from an unbounded line.%n 2552 1The range for this breakline is from %r to %r.%n 2553 1CommandImplD-Copy rejected this line.%n 2554 1This is not a breakline.%n 2555 1You cannot trim clustered objects.%n 2556 1You cannot dissect an unbounded line into equal pieces.%n 2557 1You cannot trim to a dimension.%n 2558 1Expert found no object.%n 2559 1Select one trajectory only when you trim to a cluster.%n 2560 1Use the mouse to select a segment to keep.%n 2561 1Use the mouse to select a fixed endpoint.%n 2562 1Use the mouse to select a cutting object.%n 2563 1There are too many intersection points; the system dissected only part of the selection.%n 2564 1That part is not found in your library.%n 2565 1There is no shape ID number.%n 2566 1%s falls out of the allowed range.%n 2567 1Select a point to represent a pin.%n 2568 1More than one point has been selected for the reference designator position.%n 2569 1This is not a shape ID number.%n 2570 1The part name is missing.%n 2571 1The ID number is missing.%n 2572 1The part number is missing.%n 2573 1The prefix is missing.%n 2574 1A prefix string can contain at most two characters.%n 2575 1Bad part object.%n 2576 1The selection contains too many points for a shape.%n 2577 1This is the wrong line style for a shape.%n 2578 1The selection contains is an inadmissible object for a shape.%n 2579 1That is the wrong selection for a shape.%n 2580 1One of the points you selected is not a pin.%n 2581 1That is the wrong selection for a part.%n 2582 1The bounding box must be a closed rectangle.%n 2583 1That object is inadmissible for a part.%n 2584 1No point has been selected for the reference designator position.%n 2585 1No footprint.%n 2586 1That is the wrong number of lines for a bounding box.%n 2587 1More than one of the selected pins has a number of %d. Duplicate pin numbers are not allowed.%n 2588 1Parts may contain only points and lines.%n 2590 1No pins.%n 2591 1There is no pin text on this pin.%n 2592 1Bad pin text.%n 2593 1Coordinate off part.%n 2594 1One of the pins has an out of range pin number. Pin numbers must be between 1 and 256, inclusive.%n 2595 1Lost site index in the pin text.%n 2596 1Lost swap code number in pin text.%n 2597 1Lost diameter in the pin text.%n 2598 1Lost pad stack in the pin text.%n 2599 1Bad shape number.%n 2600 1One of the ID fields is either blank or not a number.%n 2601 1Use the mouse to write the new part.%n 2602 1This part is already in the library.%n 2603 1Use the mouse to overwrite the old part.%n 2604 1This shape is valid.%n 2605 1This part is valid.%n 2606 1You've included a point without a pin number.%n 2607 1Bad part tag in library.%n 2608 1The part has been read.%n 2609 1The system cannot open %s.%n 2610 1The system cannot write an unknown object.%n 2611 1Division by zero is not allowed.%n 2612 1This object is not circular.%n 2613 1This object is not a filled area.%n 2614 1This filled area is not closed.%n 2615 1The current selection contains an object that is not valid as the boundary of a filled area.%n 2616 1Bad tag.%n 2618 1The unbounded point escaped being clipped.%n 2619 1The hyperbola has been broken into three.%n 2620 1Expert doesn't understand a negative parabola scale.%n 2621 1The parabola has been broken into three.%n 2622 1Break curve.%n 2623 1Two unbounded points passed to LineParameters.%n 2624 1Either the start or the stop point is off the conic.%n 2625 1Corrupt affine screen place record.%n 2626 1Clip to unbounded point.%n 2627 1Clip conic found too many segments.%n 2628 1Entry/exit overflow.%n 2629 1Unmatched entry and exit.%n 2630 1A point is not on a side of the box.%n 2631 1Damaged drawing file: %s.%n 2632 1The saved current page of a multi-page drawing is missing.%n This drawing may be damaged.%n 2633 1You cannot destroy the last command window.%n 2634 1Commands not present!%n 2635 1%s.%n 2636 1Non-conic accelerators.%n 2637 1You left a text field selected; it has been deselected for you.%n 2638 1Type-in inconsistency.%n 2639 1Select the objects for cornering first.%n 2640 1That argument is not a number.%n 2641 1Form error: no argument was found.%n 2642 1Form error: no choices were found.%n 2643 1Form error: Choice was not recognized.%n 2644 1An argument is not set.%n 2645 1The command was not found.%n 2646 1No point.%n 2647 1Press the left mouse button to delete the field, the right to replicate it.%n 2648 1Fill-in called incorrectly.%n 2649 1Cannot set the current type in.%n 2650 1The objects selected are already %s.%n 2651 1You cannot cluster objects already in a cluster.%n 2652 1These objects are not clustered.%n 2653 1You cannot uncluster an area.%n 2654 1You cannot uncluster a dimension.%n 2655 1The selected objects must all form one cluster.%n 2656 1That is an unreasonable number of copies.%n 2657 1The number of copies must be greater than zero.%n 2658 1The length must be greater than zero.%n 2659 1A point is not a trajectory.%n 2660 1Wrong reference point.%n 2661 1You must use two parallel lines as references for an object-relative copy.%n 2662 1The two reference lines must be parallel.%n 2663 1You cannot copy an unknown object.%n 2664 1Use the mouse to select the trajectory.%n 2665 1Use the mouse to select the point to begin on the trajectory.%n 2666 1You must select a point.%n 2667 1Select the first reference object (a point, arc, circle, or the first of two parallel lines).%n 2668 1Select the second reference object (a point, arc, circle, or the second of two parallel lines).%n 2669 1Lost association.%n 2670 1You cannot delete the last replicate field without resetting the Forms Design feature.%n 2671 1Object-relative move are limited to a single window.%n 2672 1You cannot perform this kind of rotation on an ellipse.%n 2674 1You cannot rotate text.%n 2675 1You cannot select the grid.%n 2676 1You cannot rotate an unknown object.%n 2677 1The note was created before Release 1.5 and cannot be dragged.%n 2678 1Don't use this object as a trajectory.%n 2679 1Use the mouse to select a line.%n 2680 1An immovable object was destroyed.%n 2681 1Use the mouse to select a line around which to rotate.%n 2682 1You must select a line.%n 2683 1Use the mouse to select the pivot point.%n 2684 1Use the mouse to select the trajectory.%n 2685 1You must select a trajectory.%n 2686 1Use the mouse to select a reference point for the drag.%n 2687 1The object was not transformed.%n 2688 1The matrix does not represent rigid transformation.%n 2689 1That command is only valid with a selection.%n 2690 1Geometry error: %s.%n 2691 1Unknown command.%n 2692 1Invalid class.%n 2693 1Bad root.%n 2694 1Unknown object type.%n 2695 1You have selected a location in a view not related to the current view. Select with the cursor in the desired view before issuing the command.%n 2696 1Select with the mouse an object to which to trim.%n 2697 1Select an object in a drawing window.%n 2698 1The reference object must lie in a view of the same page. Try again.%n 2699 1You didn't select close enough to an object; try again.%n 2700 1That's the object you're trimming; select again.%n 2701 1No current grid.%n 2702 1Bad grid.%n 2703 1No grid by this name yet exists.%n 2704 1You cannot delete the normal grid.%n 2705 1You've already created the maximum number of axes.%n 2706 1no file names specified... 2708 1The drawing already contains that page.%n 2709 1Negative page sizes are not allowed.%n 2710 1The drawing is too big.%n 2711 1Press and hold the left mouse button over one corner; then continue to hold it while drawing through to the opposite corner... 2712 1Fill array bounds fault.%n 2713 1Conic dda in infinite loop.%n 2714 1Fill stack bug.%n 2715 1Unknown display bug.%n 2716 1Invalid grid type.%n 2717 1Bad line type for grid.%n 2718 1Bad filled area.%n 2719 1You cannot create filled areas from unbounded lines.%n 2720 1You've not specified a grid name.%n 2721 1You must select at least two objects for any relative description.%n 2722 1This is not a curve.%n 2723 1The angles for a hyperbola must not be either 0 or 180 degrees apart.%n 2724 1There is no point on one of the lines.%n 2725 1Degenerate conic.%n 2726 1Choosing a point not on either line is disallowed.%n 2727 1You cannot dimension %s.%n 2728 1You cannot place a text note on %s.%n 2729 1Please specify the text in the Forms and Properties window.%n 2730 1Select exactly one object.%n 2731 1The angular dimension command applies only to lines.%n 2732 1Illegal line.%n 2733 1These two lines are not perpendicular.%n 2734 1These lines do not intersect.%n 2735 1Improper chamfer.%n 2736 1Expert cannot carry out the rotation you've requested.%n 2737 1Pin names may be no longer than 15 characters.%n 2738 1You cannot intersect an object with itself.%n 2739 1Bad checkplot pad.%n 2743 1Expert cannot find a suitable aperture.%n 2744 1Bad shape aperture.%n 2746 1The system cannot open the parts library.%n 2747 1The system cannot open the design file.%n 2748 1The time stamps differ for the .pr file (%t) and the original board blank (%t).%n 2749 1Unknown drawing type.%n 2754 1The number of layers in the Layer Description Table for this drawing doesn't match the schematic.%n 2756 1Improper finger.%n 2757 1There is an improper text object in the finger.%n 2758 1There is an improper finger object in the finger.%n 2759 1There is more than one point in a shape.%n 2760 1There is an improper text object in the shape.%n 2761 1Improper via.%n 2763 1Improper etch.%n 2764 1Improper checkplot table.%n 2765 1Layer number %d could not be found in the Layer Table.%n 2766 2The system encountered null padstacks.%e%e%n|%d null padstacks out of %d.%n 2768 1This %s rectangle contains a nonorthogonal line.%n 2769 1This rectangle is not a finger.%n 2770 1This %s rectangle contains too many points.%n 2771 1This location rectangle is not on the part grid.%n 2772 1This %s rectangle requires a point.%n 2773 1Part name: %s, number: %s, ID: %u, silkscreen ID: %u, shape ID: %u.%n 2774 1Part box width: %d, height: %d.%n 2775 1Prefix: %s, pin count: %d.%n 2776 1Pin number: %s at %p, named: %s, swap code: %d, type: %s, site number: %d.%n 2777 1The via grid and the part grid must share the same origin.%n 2778 1That command applies to a maximum of %d objects.%n 2779 1The library is busy. Close all of your documents and try again.%n 2780 1The auxiliary library %s is not present on the workstation's disk.%n 2781 1The system found an unknown library bug.%n 2782 1Select an endpoint.%n 2783 1Select the approximate position of the line you want to draw.%n 2784 1No route interior rectangles are not permitted for a two-layer board.%n 2786 1There are too many channels.%n 2788 1You cannot dimension this type of object.%n 2789 1The command was cancelled.%n 2790 1The lines are parallel; no angular dimension was given.%n 2791 1The selected point is too close to an intersection.%n 2792 1The dimension arc is not outside the selected lines.%n 2793 1You've indicated an ambiguous reference point.%n 2794 1The reference point not on the arc.%n 2795 1The reference point is not between the endpoints.%n 2796 2%s renamed.%n%e|%s renamed to %s.%n 2797 1Expert cannot carry out this circle command.%n 2798 1Expert cannot carry out this arc command.%n 2799 1The system doesn't recognize this accelerator command.%n 2800 1The system cannot perform this line operation.%n 2801 1Expert cannot operate on this drawing's text.%n 2802 1Expert cannot operate on this drawing's points.%n 2803 1This file was written with non-release software. Its format may not be supported later.%n 2804 1Unknown file version.%n 2805 1This action cannot be executed until there is a current view.%n 2806 1"%s" is a new value for this field. Use the left mouse button to confirm or the right mouse button to reject.%n 2807 1This command is not valid with only part of a cluster selected. Please reselect.%n 2808 1TestBrokenAssocs fails.%n 2809 1The following files will be plotted: %s. Click the left mouse button to confirm, the right to abort... 2810 1select a view... 2811 1cannot find file list... 2812 1incorrect format for the list of pages... 2813 1No current view to determine scale.%n 2814 1Associativity check not defined for this command.%n 2815 1Page %d has been added to the drawing %s.%n 2816 2Data destructive operation. Confirm.%e%e%n|This operation is data destructive. All objects on page %d of drawing %s will be deleted. Click the left mouse button to confirm, the right to abort.%n 2817 2Page deleted.%e%e%n|Page %d of %s has been deleted.%n 2818 1Cannot invert a degenerate matrix.%n 2819 1Singular transformation. Object cannot be successfully transformed.%n 2820 1Arc to ellipse problem. Object cannot be successfully transformed.%n 2821 1Conic Transformation problem. Object cannot be successfully transformed.%n 2822 1Bad object for Image profile.%n 2850 1For plotting:%n 2851 1Board size is %r x %r. (max height by max width)%n 2852 1Board has %d horizontal channels.%n 2853 1Board has %d vertical channels.%n 2854 1Board has %d locations.%n 2855 1Board has %d no via areas.%n 2856 1Board has %d no route top areas.%n 2857 1Board has %d no route interior areas.%n 2858 1Board has %d no route bottom areas.%n 2859 1Connector %s has %d pins and all are (in/not in) sequence.%n 2860 1Board has a %s grid at origin %r, %r with x-spacing of %r and y-spacing of %r.%n 2861 1Board has %d layers.%n 2862 1You cannot project 90 degrees.%n 2863 1You cannot project this conic.%n 2864 1Board has %d no place areas.%n 2865 1Pad Stacks for Part Pins (Aperture not to connect) Table:%n pad stack #%d, for solder entry shows an incorrect aperture number.%n 2866 1Pad Stacks for Part Pins (Aperture not to connect) Table:%n pad stack #%d, for pad master entry shows an incorrect aperture number.%n 2867 1Pad Stacks for Vias (Aperture not to connect) Table:%n etch rule #%d, for solder entry shows an incorrect aperture number.%n 2868 1Pad Stacks for Vias (Aperture not to connect) Table:%n etch rule #%d, for pad master entry shows an incorrect aperture number.%n 2869 1Pad Stack #%d was not found in the Pad Stacks for Part Pins (Aperture to connect) Table.%n 2870 1Pad Stack #%d was not found in the Pad Stacks for Part Pins (Aperture not to connect) Table.%n 2871 1Etch rule #%d was not found in the Pad Stacks for Vias (Aperture to connect) Table.%n 2872 1Etch rule #%d was not found in the Pad Stacks for Vias (Aperture not to connect) Table.%n 2873 1Etch rule #%d was not found in the Trace Table.%n 2874 1This object has an aperture number not found in the Aperture Table.%n 2875 1Type-in error in the %s Table: %s %s.%n 2876 1Invalid table name.%n 2877 1%n%s plotted to the local disk.%n 2878 1Problems rotating this filled area.%n 2879 1This finger's via lies outside the placement area.%n 2880 1Select two points first.%n 2881 2Select a center point.%n|Use the mouse to select the ellipse's center point.%n 2882 1The selected points are too close together for this command.%n 2883 1The ellipse is too thin to construct.%n 2884 1No such ellipse exists.%n 2885 2A %s%e parabola with center at %p.%n%e%e%e|This %s parabola on layer %s has its center at %p, an axis angle of %r,%n and a focal distance of %r. It has an unlimited start and an unlimited stop, at a scale of %r.%n 2886 2A %s%e parabola with center at %p.%n%e%e%e%e|This %s parabola on layer %s has its center at %p, an axis angle of %r,%n and a focal distance of %r. It has an unlimited start and stops at %p, at a scale of %r.%n 2887 2A %s%e parabola with center at %p.%n%e%e%e%e|This %s parabola on layer %s has its center at %p, an axis angle of %r,%n and a focal distance of %r. It starts at %p and has an unlimited stop, at a scale of %r.%n 2888 2A %s%e parabola with center at %p.%n%e%e%e%e%e|This %s parabola on layer %s has its center at %p, an axis angle of %r,%n and a focal distance of %r. It starts at %p and stops at %p, at a scale of %r.%n 2889 2A %s%e hyperbola with center at %p.%n%e%e%e%e|This %s on layer %s hyperbola has its center at %p, with its clockwise asymptote at angle %r,%n its counterclockwise asymptote at angle %r, and a slackness of %r. It has an unlimited start and an unlimited stop, at a scale of %r.%n 2890 2A %s%e hyperbola with center at %p.%n%e%e%e%e%e|This %s on layer %s hyperbola has its center at %p, with its clockwise asymptote at angle %r,%n its counterclockwise asymptote at angle %r and a slackness of %r. It has an unlimited start and stops at %p, at a scale of %r.%n 2891 2A %s%e hyperbola with center at %p.%n%e%e%e%e%e|This %s on layer %s hyperbola has its center at %p, with its clockwise asymptote at angle %r,%n its counterclockwise asymptote at angle %r and a slackness of %r. It starts at %p and has an unlimited stop, at a scale of %r.%n 2892 2A %s%e hyperbola with center at %p.%n%e%e%e%e%e%e|This %s on layer %s hyperbola has its center at %p, with its clockwise asymptote at angle %r,%n its counterclockwise asymptote at angle %r and a slackness of %r. It starts at %p and stops at %p, at a scale of %r.%n 2893 1Select with the mouse the first cutting object near the new starting point.%n 2894 1Select with the mouse the second cutting object near the new stopping point.%n 2895 1The current grid is too finely spaced to be displayed at the zoom factor of at least one of the views of this drawing.%n 2896 1The system cancelled the request, since the hyperbola would disappear.%n 2897 1The system cancelled the request, since the parabola would disappear.%n 2898 1This trim would cause the object to close.%n 2929 1Invalid aperture number. Object not plotted.%n 2930 1Insufficient space on disk for sorting. Plot generated unsorted.%n 2931 1Processing library Ids... 2932 1this listing will contain %d parts.%n 2933 1This library is too large to do a complete listing. A partial listing will be generated.%n 2934 1Unable to acquire text file for writing.%n 2935 1The condition number for this transformation is %r.%n 2936 1The condition number, %r, for this transformation is too large.%n 2937 1Unable to convert arc.%n 2938 1Unable to convert conic.%n 2939 1This command requires an active view.%n 2940 1This gerber file will be generated at the indicated scale which is DIFFERENT from 1.0... 2959 1Validating %s. Click the left mouse button to confirm, the right to abort.%n 2989 1DisplayShapes must be called with the silkscreen or part shape visible.%n 2990 1Pin enumerator called with something other than a point.%n 2991 1Two special clusters have been found to be clustered together. The special objects have been destroyed and their geometry left as a simple cluster.%n 2992 1Shape ID %u has been successfully written to %s.%n 2993 1Cannot do a detail at scale between parallel lines.%n 2994 1Select the first reference object (a point, arc or a circle).%n 2995 1Select the second reference object (a point, arc or a circle).%n 3201 1IGES to Expert conversion... 3202 1clipping planes are defined for this view... %n 3203 1process view #%d on page #%d at coordinate X: %r Y: %r... %n 3204 1add page %d for next drawing... 3205 1process drawing annotations... 3206 1System ID = %s, units = %s, model scale = %r%n 3207 1Real number %s has been rounded off to zero.%n 3208 1Real number %s too large. Replaced by: %s%n 3209 1Non-unit vector found in transformation matrix %s%n 3210 1Expert text string "%s" contains characters from two different IGES symbol fonts.%n 3211 1The system found %d IGES entities which were completely outside the viewing box.%n