[Indigo]<Chipndale>5.2>nmos18>ChipndaleNMos.TIP!8

-- ///cd18/chipndalenmos.TIP

-- Tip-table for ChipNDale NMos

-- Created by: Christian Jacobi, June 1, 1984 5:25:04 pm PDT

-- Last Edited by: Christian Jacobi, November 9, 1984 9:57:19 am PST

[DEF,LeftDown,(Red Down)]

[DEF,LeftUp,(Red Up)]

[DEF,MiddleDown,(Yellow Down)]

[DEF,MiddleUp,(Yellow Up)]

[DEF,RightDown,(Blue Down)]

[DEF,RightUp,(Blue Up)]

[DEF,CTRL,(Ctrl Down)]

[DEF,SHIFT,(LeftShift Down | RightShift Down)]

[DEF,LEFTSH,(LeftShift Down | Lock Down)]

[DEF,WireCursor,(WHILE ChipndaleWireCursor)]

[DEF,ArrowCursor,(WHILE ChipndaleArrowCursor)]

[DEF,RectCursor,(WHILE ChipndaleRectCursor)]

[DEF,InFooMode,(WHILE ChipndaleXMode)]

[DEF,NotInFooMode,(WHILE ChipndaleNXMode)]

[DEF,ClearFooMode,(UseCursor, SetXModeOff)]

[DEF,SetFooMode,(UseCursor, SetXModeOn)]

[DEF,ResetT,(Coords, StopTrack, Track)]

[DEF,Reset,(StopTrack)]

[DEF,FirstSelect,(Coords, ReSelectOnlyP, Track)]

[DEF,ReselectLast,(Coords, DeSelectLP, AddSelectP, Track)]

[DEF,SingleSelect,(Coords, OnlySelectP, Track)]

[DEF,RectTracking,(Coords, StopTrack, UseCursor, rect, Track)]

[DEF,ArrowTracking,(Coords, StopTrack, UseCursor, arrow, Track)]

[DEF,WireTracking,(Coords, StopTrack, UseCursor, wire, Track)]

[DEF,PartialWire,(Coords, ContinueWire, UseCursor, PartialWireAdvance, Track)]

[DEF,FlipWire,(UseCursor, FlipWire, Coords, Track)] --WARNING these Coords might be out of range

[DEF,Menu,

(~1 Down WHILE Space Down

WHILE [RightUp] WHILE [LeftUp] WHILE [MiddleUp] => ~2;

Space Down WHILE ~1 Down

WHILE [RightUp] WHILE [LeftUp] WHILE [MiddleUp] => ~2)]

~1 represent's key; ~2 represent's Menu atom to call

[DEF,CatchUp,(~1 Up => StopTrack, UseCursor, default)]

~1 represent's key to catch on up

[DEF,Catch,(~1 Down => StopTrack, UseCursor, default;

[CatchUp, ~1];

[MiddleDown] WHILE ~1 Down => StopTrack, UseCursor, default)]

~1 represent's key to catch on up, down, middle down

SELECT TRIGGER FROM

Mouse

Mouse => Coords, Track;

ESC

--remember: ESC-LF aborts an ongoing paint process

DEL Down WHILE ESC Down => AbortCommand;

ESC Down WHILE DEL Down => AbortCommand;

Select close

[LeftDown] WHILE ESC Down WHILE TAB Down => Coords, CloseReSelectOnlyP;

Select all of current layer; (somewhat crazy)

[RightDown] WHILE ESC Down WHILE Space Down => Coords, AddSelectLevel;

Select, Deselect all

[LeftDown] WHILE ESC Down => DeSelectS;

[RightDown] WHILE ESC Down => SelectAll;

Undelete, Abort

[MiddleDown] WHILE ESC Down WHILE TAB Down => AbortCommand;

[MiddleDown] WHILE ESC Down WHILE [CTRL] => AbortCommand;

[MiddleDown] WHILE ESC Down => StopDrawing;

[Catch, ESC];

Space for menu's

All the pop-up menus

[Menu, G, GlobalMenu];

[Menu, V, ViewerMenu];

[Menu, D, DirectoryMenu];

[Menu, I, IOMenu];

[Menu, O, IOMenu];

[Menu, P, ProgramMenu];

[Menu, T, TransformS];

[Menu, C, CellMenu];

[Menu, B, DisplayMenu];

[Menu, BackSlash, ConditionsMenu];

AAA

Stretching and Moving incrementally left the selection

[RightDown] WHILE A Down => [ResetT];

[LeftUp] WHILE A Down WHILE [CTRL] => Coords, StretchStepLeftS;

[RightUp] WHILE A Down WHILE [CTRL] => Coords, StretchStepLeftS;

[LeftUp] WHILE A Down WHILE [SHIFT] => Coords, StretchyMoveStepLeftS;

[RightUp] WHILE A Down WHILE [SHIFT] => Coords, StretchyMoveStepLeftS;

[LeftUp] WHILE A Down => Coords, LambdaLeftS;

[RightUp] WHILE A Down => Coords, LambdaLeftS;

[Catch, A];

BBB

Split Wire (do you see how the B is split in the middle?)

[RightDown] WHILE B Down => [ArrowTracking];

B Down WHILE [LeftDown] => [ArrowTracking];

[LeftDown] WHILE B Down => [FirstSelect], [ArrowTracking];

Space Down WHILE [LeftDown] WHILE B Down => [SingleSelect], [ArrowTracking];

[LeftUp] WHILE B Down [ArrowCursor] => Coords, SplitWireS;

[RightUp] WHILE B Down [ArrowCursor] => Coords, SplitWireS;

[Catch, B];

CCC

[RightDown] WHILE C Down => [ResetT];

Creation of cell (use X key)

[MiddleDown] WHILE C Down WHILE X Down => CreateCellSAndName;

[MiddleDown] WHILE C Down WHILE V Down => PopReplace;

Transform to cell (use V key)

[LeftUp] WHILE C Down WHILE V Down => TransformToCellS;

[RightUp] WHILE C Down WHILE V Down => TransformToCellS;

Create or draw expand a Cell (use X key)

[MiddleDown] WHILE C Down => Coords, DrawCell;

[LeftUp] WHILE C Down WHILE X Down => ExpandS;

[RightUp] WHILE C Down WHILE X Down => ExpandS;

Push and Pop

[LeftUp] WHILE C Down => PushS;

[RightUp] WHILE C Down => PopMenu;

[Catch, C];

DDD

See also V

Deleting

[RightDown] WHILE D Down => [ResetT];

[MiddleDown] WHILE D Down WHILE V Down => PopFlush;

[MiddleDown] WHILE D Down => Undel;

[LeftUp] WHILE D Down => DeleteS;

[RightUp] WHILE D Down => DeleteS;

[Catch, D];

EEE

Mirror up-down (this key is close to R (otation); further, it is symmetric )

[RightDown] WHILE E Down => [ResetT];

Space Down WHILE E Down WHILE [LeftDown] => [SingleSelect];

[LeftUp] WHILE E Down => MirrorYS;

[RightUp] WHILE E Down => MirrorYS;

[MiddleDown] WHILE E Down => Coords, DrawPullup;

[Catch, E];

FFF

[RightDown] WHILE F Down => [ResetT];

[LeftUp] WHILE F Down => Coords, ShrinkStepS;

[RightUp] WHILE F Down => Coords, ShrinkStepS;

[Catch, F];

GGG

[RightDown] WHILE G Down => [ResetT];

[LeftUp] WHILE G Down => Coords, GrowStepS;

[RightUp] WHILE G Down => Coords, GrowStepS;

[Catch, G];

HHH

[Catch, H];

III

[Catch, I];

JJJ

[Catch, J];

KKK

[Catch, K];

LLL

[Catch, L];

MMM

[Catch, M];

Signal or instance Names (Stil CRAZXY)

[RightDown] WHILE N Down => [ResetT];

Space Down WHILE N Down WHILE [LeftDown] => [SingleSelect];

[MiddleDown] WHILE N Down => Coords, EnterNameS;

[LeftUp] WHILE N Down => DisplayNames;

[RightUp] WHILE N Down => DisplayNames;

[Catch, N];

OOO

[Catch, O];

PPP

[RightDown] WHILE P Down => [ResetT];

Rect program menu

[MiddleDown] WHILE P Down WHILE [SHIFT] => [RectTracking];

[MiddleUp] WHILE P Down WHILE [SHIFT] => Coords, RectProgramMenu;

Show properties of single-selected object

Space Down WHILE P Down WHILE [LeftDown] => [SingleSelect];

[LeftUp] WHILE P Down => ShowPropertiesS;

[RightUp] WHILE P Down => ShowPropertiesS;

Put property on single-selected object

[MiddleDown] WHILE P Down => EnterPropertyS;

[Catch, P];

QQQ

Move, Copy, Stretch single-selected object

Q Down WHILE [LeftDown] => [ArrowTracking];

[LeftDown] WHILE Q Down => [FirstSelect], [ArrowTracking];

Space Down WHILE [LeftDown] WHILE Q Down => [SingleSelect], [ArrowTracking];

[LeftUp] WHILE Q Down WHILE TAB Down [ArrowCursor] => Coords, CopyS;

[LeftUp] WHILE Q Down WHILE [CTRL] [ArrowCursor] => Coords, StretchS;

[LeftUp] WHILE Q Down WHILE [SHIFT] [ArrowCursor] => Coords, StretchyMoveS;

[LeftUp] WHILE Q Down [ArrowCursor] => Coords, MoveS;

Move, Copy, Stretch

Q Down WHILE [RightDown] => [ArrowTracking];

[RightDown] WHILE Q Down => [ArrowTracking];

Space Down WHILE [RightDown] WHILE Q Down => [ReselectLast], [ArrowTracking];

[RightUp] WHILE Q Down WHILE TAB Down [ArrowCursor] => Coords, CopyS;

[RightUp] WHILE Q Down WHILE [SHIFT] [ArrowCursor] => Coords, StretchyMoveS;

[RightUp] WHILE Q Down WHILE [CTRL] [ArrowCursor] => Coords, StretchS;

[RightUp] WHILE Q Down [ArrowCursor] => Coords, MoveS;

Transistors

[MiddleDown] WHILE Q Down WHILE [LEFTSH] => Coords, DrawPXstr;

[MiddleDown] WHILE Q Down => Coords, DrawNXstr;

[Catch, Q];

RRR

Rotation and rename of objects

Space Down WHILE R Down WHILE [LeftDown] => [SingleSelect];

[LeftUp] WHILE R Down WHILE TAB Down => RenameS;

[RightDown] WHILE R Down => [ResetT];

[RightUp] WHILE R Down WHILE TAB Down => RenameS;

[LeftUp] WHILE R Down => RotS;

[RightUp] WHILE R Down => RotS;

[Catch, R];

SSS

Stretching and Moving incrementally right the selection

[RightDown] WHILE S Down => [ResetT];

[LeftUp] WHILE S Down WHILE [CTRL] => Coords, StretchStepRightS;

[RightUp] WHILE S Down WHILE [CTRL] => Coords, StretchStepRightS;

[LeftUp] WHILE S Down WHILE [SHIFT] => Coords, StretchyMoveStepRightS;

[RightUp] WHILE S Down WHILE [SHIFT] => Coords, StretchyMoveStepRightS;

[LeftUp] WHILE S Down => Coords, LambdaRightS;

[RightUp] WHILE S Down => Coords, LambdaRightS;

[Catch, S];

TTT

Mirror left-right (this key is close to R (otation); further, it is symmetric )

[RightDown] WHILE T Down => [ResetT];

Space Down WHILE T Down WHILE [LeftDown] => [SingleSelect];

[LeftUp] WHILE T Down => MirrorS;

[RightUp] WHILE T Down => MirrorS;

[Catch, T];

UUU

[Catch, U];

VVV

See also C,D Keys;

Push and Pop (V: see how it goes up and down ?)

[RightDown] WHILE V Down => [ResetT];

[RightUp] WHILE V Down => PushS;

[LeftUp] WHILE V Down => PushS;

[MiddleDown] WHILE V Down WHILE X Down => PopNew;

[MiddleDown] WHILE V Down => PopMenu;

[Catch, V];

WWW

Stretching and Moving incrementally up the selection

[RightDown] WHILE W Down => [ResetT];

[LeftUp] WHILE W Down WHILE [CTRL] => Coords, StretchStepUpS;

[RightUp] WHILE W Down WHILE [CTRL] => Coords, StretchStepUpS;

[LeftUp] WHILE W Down WHILE [SHIFT] => Coords, StretchyMoveStepUpS;

[RightUp] WHILE W Down WHILE [SHIFT] => Coords, StretchyMoveStepUpS;

[LeftUp] WHILE W Down => Coords, LambdaUpS;

[RightUp] WHILE W Down => Coords, LambdaUpS;

Angle transistors

[MiddleDown] WHILE W Down WHILE [LEFTSH] => Coords, DrawAnglePXstr;

[MiddleDown] WHILE W Down => Coords, DrawAngleNXstr;

[Catch, W];

XXX

See also C key if topic is Cell

external (imported) objects

[RightDown] WHILE X Down => [ResetT];

[RightUp] WHILE X Down WHILE Space Down => Coords, SelectADesign; --is textually after expand

[LeftUp] WHILE X Down WHILE Space Down => Coords, SelectADesign; --is textually after expand

[MiddleDown] WHILE X Down WHILE Space Down => Coords, DrawCorrespondingObject;

[MiddleDown] WHILE X Down => Coords, DrawImported;

[Catch, X];

YYY

[MiddleDown] WHILE Y Down WHILE [SHIFT] => Coords, SetInterestRect;

[MiddleDown] WHILE Y Down => Coords, DrawMark;

[Catch, Y];

ZZZ

Stretching and Moving incrementally down the selection

[RightDown] WHILE Z Down => [ResetT];

[LeftUp] WHILE Z Down WHILE [CTRL] => Coords, StretchStepDownS;

[RightUp] WHILE Z Down WHILE [CTRL] => Coords, StretchStepDownS;

[LeftUp] WHILE Z Down WHILE [SHIFT] => Coords, StretchyMoveStepDownS;

[RightUp] WHILE Z Down WHILE [SHIFT] => Coords, StretchyMoveStepDownS;

[LeftUp] WHILE Z Down => Coords, LambdaDownS;

[RightUp] WHILE Z Down => Coords, LambdaDownS;

[Catch, Z];

Zero

Zero Down => [Reset]; -- this is used to return version number

[CatchUp, Zero];

One

Butting contact

[MiddleDown] WHILE One Down WHILE Two Down WHILE Three Down => Coords, DrawNButCon;

Buried contacts

[MiddleDown] WHILE One Down WHILE Two Down => Coords, DrawNBurCon;

One Down WHILE Two Down => [Reset];

One Down WHILE Three Down => [Reset];

N-diffusion contacts or set N-diffusion

One Down => SELECT TRIGGER FROM

[MiddleDown] => Coords, DrawNDifCon;

One Up => SetLayerNDif;

ENDCASE => [Reset];

[MiddleDown] WHILE One Down => Coords, DrawNDifCon;

[CatchUp, One];

Two

Draw with poly

Two Down WHILE One Down => [Reset];

Two Down WHILE Three Down => [Reset];

Two Down => SELECT TRIGGER FROM

[MiddleDown] => Coords, DrawPolCon;

Two Up => SetLayerPol;

ENDCASE => [Reset];

[MiddleDown] WHILE Two Down => Coords, DrawPolCon;

[CatchUp, Two];

Three

Draw with metal

Three Down WHILE One Down => [Reset];

Three Down WHILE Two Down => [Reset];

Three Down => SELECT TRIGGER FROM

[MiddleDown] => Coords, DrawNButCon;

Three Up => SetLayerMet;

ENDCASE => [Reset];

[MiddleDown] WHILE Three Down => Coords, DrawNButCon;

[CatchUp, Three];

Four

Draw with Metal2

Four Down => SELECT TRIGGER FROM

[MiddleDown] => Coords, DrawMm2Con;

Four Up => SetLayerMet2;

ENDCASE => [Reset];

[MiddleDown] WHILE Four Down => DrawMm2Con;

Four Down => SetLayerMet2;

[CatchUp, Four];

Five

[Catch, Five];

Six

[Catch, Six];

Seven

[Catch, Seven];

Eight

[Catch, Eight];

Arrow

Debug chipndale

[LeftDown] WHILE Arrow Down => Coords, Debug;

[MiddleDown] WHILE Arrow Down => Coords, Debug;

[RightDown] WHILE Arrow Down => Coords, Debug;

[Catch, Arrow];

Quote

Prepare plots

[LeftDown] WHILE Quote Down => [RectTracking];

[MiddleDown] WHILE Quote Down => [RectTracking];

[RightDown] WHILE Quote Down => [RectTracking];

BW Plot

[LeftUp] WHILE Quote Down WHILE [SHIFT] [RectCursor] => Coords, VersatecBWPlot;

[MiddleUp] WHILE Quote Down WHILE [SHIFT] [RectCursor] => Coords, VersatecBWPlot;

[RightUp] WHILE Quote Down WHILE [SHIFT] [RectCursor] => Coords, VersatecBWPlot;

Color Plot

[LeftUp] WHILE Quote Down [RectCursor] => Coords, VersatecColorPlot;

[MiddleUp] WHILE Quote Down [RectCursor] => Coords, VersatecColorPlot;

[RightUp] WHILE Quote Down [RectCursor] => Coords, VersatecColorPlot;

[Catch, Quote];

LeftBracket

[RightDown] WHILE LeftBracket Down => [ResetT];

LeftBracket together with RightBracket: Alter

[LeftUp] WHILE LeftBracket Down WHILE RightBracket Down => AlterS;

[RightUp] WHILE LeftBracket Down WHILE RightBracket Down => AlterS;

Increment the repetition (LeftBracket is near the =)

[LeftUp] WHILE LeftBracket Down => Coords, IncCountS;

[RightUp] WHILE LeftBracket Down => Coords, IncCountS;

[Catch, LeftBracket];

RightBracket

[RightDown] WHILE RightBracket Down => [ResetT];

Decrement the repetition (RightBracket is near the =)

[LeftUp] WHILE RightBracket Down => Coords, DecCountS;

[RightUp] WHILE RightBracket Down => Coords, DecCountS;

[Catch, RightBracket];

Equal

Create a Repetition (do you se the repeated horizontal lines?)

[RightDown] WHILE Equal Down => [ResetT];

[MiddleDown] WHILE Equal Down => [ArrowTracking];

[MiddleUp] WHILE Equal Down [ArrowCursor] => Coords, DrawRepetition;

[Catch, Equal];

Dash, for the tiler program

[MiddleDown] WHILE Dash Down => Coords, ModuleMenu;

[LeftDown] WHILE Dash Down => Coords, ModuleMenu;

[RightDown] WHILE Dash Down => Coords, ModuleMenu;

Dash Down WHILE TAB Down => RunTiler;

[Catch, Dash];

BackSlash

Make an object Conditional

[MiddleUp] WHILE BackSlash Down WHILE [SHIFT] => RemoveConditionS;

[MiddleUp] WHILE BackSlash Down => DrawConditionS;

[Catch, BackSlash];

SemiColon

Pins (EXXPERIMENTAL)

[LeftUp] WHILE SemiColon Down WHILE [SHIFT] => RemovePinGraphicModeS;

[RightUp] WHILE SemiColon Down WHILE [SHIFT] => RemovePinGraphicModeS;

[LeftUp] WHILE SemiColon Down => PinGraphicModeS;

[RightUp] WHILE SemiColon Down => PinGraphicModeS;

[MiddleDown] WHILE SemiColon Down => [RectTracking];

[MiddleUp] WHILE SemiColon Down [RectCursor] => Coords, DrawPin;

[Catch, SemiColon];

--remember: LF-ESC aborts an ongoing paint process

LF Down WHILE [SHIFT] => EnforcePanel;

[Catch, LF];

DEL

--remember: ESC-DEL => AbortCommand

[Catch, DEL];

Comma <

Zoom in

Comma Down => ScaleMoreDetail;

[CatchUp, Comma];

Period >

Zoom out

Period Down => ScaleLessDetail;

[CatchUp, Period];

Slash (but you really see the <?> )

Display hierarchy

[RightDown] WHILE Slash Down => [ResetT];

[MiddleDown] WHILE Slash Down => Coords, SpinifexHighlightNodeP;

[LeftUp] WHILE Slash Down => DisplayHierarchyS;

[RightUp] WHILE Slash Down => DisplayHierarchyS;

Display Foo

Slash Down WHILE [SHIFT] => ShowErrors;

Slash Down WHILE [CTRL] => Statistic;

[Catch, Slash];

Keyset1

[Catch, Keyset1];

Keyset2

[Catch, Keyset2];

Keyset3

[Catch, Keyset3];

Keyset4

[Catch, Keyset4];

Keyset5

[Catch, Keyset5];

[Catch, BS];

Spare2

[Catch, Spare2];

Spare3

[Catch, Spare3];

Space

Show Box this viewer; (drag) or select all (click)

[LeftDown] WHILE Space Down WHILE TAB Down => DeSelectS;

[LeftDown] WHILE Space Down => SELECT TRIGGER FROM

[LeftUp] BEFORE 200 => ResetScaleSel;

ENDCASE => [RectTracking];

[LeftUp] WHILE Space Down [RectCursor] => Coords, ShowRect;

Move viewer (drag) or reset scale (click)

[MiddleDown] WHILE Space Down WHILE TAB Down => ResetScaleAll;

[MiddleDown] WHILE Space Down => SELECT TRIGGER FROM

[MiddleUp] BEFORE 200 => ResetScaleTop;

ENDCASE => [ArrowTracking];

[MiddleUp] WHILE Space Down [ArrowCursor] => Coords, MoveScreen;

Show Box another viewer; (drag) or show other viewers (click)

[RightDown] WHILE Space Down WHILE TAB Down => SelectAll;

[RightDown] WHILE Space Down => SELECT TRIGGER FROM

[RightUp] BEFORE 200 => DisplayViewers;

ENDCASE => [RectTracking];

[RightUp] WHILE Space Down [RectCursor] => Coords, ShowRectX;

Left

De-Selection by contact: area only

[LeftDown] WHILE [SHIFT] WHILE TAB Down WHILE [CTRL] => [RectTracking];

[LeftUp] [RectCursor] WHILE TAB Down WHILE [SHIFT] WHILE [CTRL] => Coords, AreaDeSelectTouching;

Selection by contact: area only

[LeftDown] WHILE [CTRL] WHILE TAB Down => [RectTracking];

[LeftUp] [RectCursor] WHILE TAB Down WHILE [CTRL] => Coords, DeSelectS, AreaAddSelectTouching;

Area DeSelection contained

[LeftDown] WHILE TAB Down WHILE [SHIFT] => [RectTracking];

[LeftUp] WHILE TAB Down [RectCursor] WHILE [SHIFT]=> Coords, AreaOnlySelect;

Area Selection contained

[LeftDown] WHILE TAB Down => [RectTracking];

[LeftUp] WHILE TAB Down [RectCursor] => Coords, AreaOnlySelect;

Select exclusive, cycle trough

[LeftDown] WHILE [SHIFT] => [SingleSelect];

Regular select

[LeftDown] => [FirstSelect];

Space Down WHILE [LeftDown] => [SingleSelect];

Middle

Select layer

Select all of current layer; (somewhat crazy)

[MiddleDown] WHILE TAB Down WHILE Space Down => Coords, AddSelectLevel;

Pointed to current layer

[MiddleDown] WHILE TAB Down => Coords, SetLayerP;

Measure size and coordinates

[MiddleDown] WHILE [CTRL] => SELECT TRIGGER FROM

[MiddleUp] BEFORE 200 => Coords, Statistic;

ENDCASE => [ArrowTracking];

[MiddleUp] WHILE [CTRL] [ArrowCursor] => Coords, Coordinates;

[MiddleDown] => [WireTracking];

Space Down WHILE [MiddleDown] [WireCursor] => [FlipWire];

LeftShift Down WHILE [MiddleDown] [WireCursor] => [PartialWire];

[MiddleUp] [WireCursor] => Coords, DrawWire;

Right

Area De-Selection by contact

[RightDown] WHILE [SHIFT] WHILE TAB Down WHILE [CTRL] => [RectTracking];

[RightUp] [RectCursor] WHILE TAB Down WHILE [SHIFT] WHILE [CTRL] => Coords, AreaDeSelectTouching;

Area Selection by contact

[RightDown] WHILE [CTRL] WHILE TAB Down => [RectTracking];

[RightUp] [RectCursor] WHILE TAB Down WHILE [CTRL] => Coords, AreaAddSelectTouching;

Area DeSelection contained

[RightDown] WHILE TAB Down WHILE [SHIFT] => [RectTracking];

[RightUp] WHILE TAB Down [RectCursor] WHILE [SHIFT]=> Coords, AreaDeSelect;

Area Selection contained

[RightDown] WHILE TAB Down => [RectTracking];

[RightUp] WHILE TAB Down [RectCursor] => Coords, AreaAddSelect;

De select

[RightDown] WHILE [SHIFT] => Coords, DeSelectFP;

Regular select

[RightDown] => Coords, AddSelectP;

Space Down WHILE [RightDown] => [ReselectLast];

Version Number

Zero Down => ChipndaleCmosX1;

Catches

[LeftDown] => Coords, [ResetT];

[RightDown] => Coords, [ResetT];

[MiddleDown] => Coords, [ResetT];

[LeftUp] => Coords, [ResetT];

[RightUp] => Coords, [ResetT];

[MiddleUp] => Coords, [ResetT];

ENDCASE.

Not inluded now

DefaultS, NarrowS, WidenS, LengthenS, ShortenS;