Key	CTRL	Mark	Draw	Sel	CTRL-TAB	othere6(1792)\f6u3U1u4U1u4U1u4U1u3U1u8U1u5f7U
A	--	MarkArea	Alter	AreaSel to Mark
		SelCorner	(bus or xstr)x0e6\f7
B	ConvToBus	Make Burr	DrawBus	--	ConvToBus,Dammite6\f7
C	DefCell	GetCell	Copy	--	Write Cif		TAB:set color tablee6\f7
D	Del(S)	--	Del(P)	DeSelect	--e6\f7
E	ExpCell(S)	ExpCell(P)	--	--	OpenErrFile		TAB:get next err file linee6\f7
F	--	--	--	--	Flush Undel list (with shift)e6\f7
H	--	--	--	--	Hardcopye6\f7
I	IncrWire	Incr/Decr	--	--	Input		<Ctrl><Shft>:DecrWCount(S)
	Count(S)	WCount(P)x0e6\f7
L	Lengthen(S)	Lengthen(P)	--	--	--e6\f7
M	Mirror(S)	Mirror(P)	Move	--	--e6\f7
N	Narrow(S)	Narrow(P)	--	--	--e6\f7
O	--	--	--	--	Output		TAB:Make Ovge6\f7
P	Push(S)	Push(P)	draw Pullup				shift:Push by namee6\f7
Q	--	--	draw one Wire  --	Quite6\f7
R	Rot (S)	Rot (P)	--	--	Restart (with shft)e6\f7
S	Shorten(S)	Shorten(P)	Stretch(PS)	--	Output Spice filee6\f7
T	EnterText(S)	EntText(P)	draw Xstr	--	--		Tab:change fonte6\f7
U	Undel	--	--	--	--e6\f7
W	Widen(S)	Widen(P)	Alter width	--	--e6\f7
X	--	--	draw Xstre6\f7
Z	display all cell names	draw AngledXstre6\f7
0	DefaultSiz(S)	DefaultSiz(P)	--	--	--e6\f7
1,2,3	set layer	--	draw contact	set layere6\f7
^(_)	Pop	--	--	--	Pop		(any):Pope6\f7
SPC	flip wires	movCol	movScrn	movBWe6\f7
none	--	Set Mark	draw wire	Sel single
		(terminate wire)	(any makes it extend sel)

The following keys ignore modifiers (like Ctrl, Tab, Mark, Sel):
ESC	Leave wiring, update scrn, etc.e6\f7 83f6u64U2f7
UNDO	Terminate command waiting for type-in
=	Move selected stuff RIGHT by one lambda
\	Move selected stuff LEFT by one lambda
LF	Move selected stuff UP by one lambda
DEL	Move selected stuff DOWN by one lambdae6\f7
NOTE: "any" means any (non-null) combination of Ctrl, Shift, or Tabe25\f6b
The following have special meaning while drawing busses:
Key	CTRL	CTRL-SHIFTe6\f6b57uB3U1u4U1u10f7U
I	IncrCount	DecrCountx0e6\f7
S	IncrSpacing	DecrSpacingx0e6\f7


chipmonk.profile file format:

When chipmonk starts up it looks for a file called "chipmonk.profile".  If it finds it it reads in and interprets each line to be of the form: <key-word><sep><value> where sep is an non-null string consisting of the characters <space> or : or = and value is a number (string of digits) or (in the case of boolean values) a word starting with t, f, y, n, 0, or 1.  Case is consistently ignored.  Key-words may be greatly abbreviated.  In the following table, the upper-case letters are those which must be present for the key-word to be recognised.  Case is ignored.  The following key-words are recognised:

Key-word		type of value
ORieNtation	# [0..7]
Xstr Ratio Width	#
Xstr Ratio Length	#
Pullup Ratio Width	#
Pullup Ratio Length	#
IMPLant		BOOL
Color SCaLe	# [1..20]
Bw SCaLe		# [1..20]
Dif WiDth		# (lambda)
Pol WiDth		# (lambda)
Met WiDth	# (lambda)
CursoR Grid	# (in points)
TicKs		# (lambda)
SiZe Cutoff Bw	#
SiZe Cutoff Color	#
SEL NeW		BOOL
CiF SCaLe		#
Color TABle	# # (two numbers -- x & y with the upper left table 0,0
			and the one to its right 1,0 and the one below it 0,1)

z18344j\f7 3f5b28f7B3f6 497b4B106u9U2u13U
\f7