[Indigo]<Cedar5.3>RPC>RPCRuntime.bcd
[Indigo]<Cedar5.2>UserProfile>UserProfileImpl.bcd
[Indigo]<Cedar5.2>Idle>IdleImpl.bcd
[Indigo]<Cedar5.3>DFPackage>DFPackage.bcd
[Indigo]<Cedar5.3>Installer>InstallerImpl.bcd
[Indigo]<Cedar5.3>BasicPackages>BasicPackages.bcd
[Indigo]<Cedar5.3>Inscript>Inscript.bcd
[Indigo]<Cedar5.3>Graphics>GraphicsPackage.bcd
[Indigo]<Cedar5.3>ColorPackage>ColorPackage.bcd
[Indigo]<Cedar5.3>TIP>TIP.bcd
[Indigo]<Cedar5.3>VersionMap>VersionMapImpl.bcd
[Indigo]<Cedar5.3>VersionMap>VersionMapDefaultsImpl.bcd
[Indigo]<Cedar5.3>WorldVM>WVM.bcd
[Indigo]<Cedar5.3>AMTypes>AMTypesPackage.bcd
[Indigo]<Cedar5.3>AMModel>AMModelPackage.bcd
[Indigo]<Cedar5.3>AMEvents>FastBreakImpl.bcd
[Indigo]<Cedar5.3>AMEvents>AMEventsImpl.bcd
[Indigo]<Cedar5.2>AMProcess>AMProcessImpl.bcd
[Indigo]<Cedar5.2>PrintTV>PrintTVPackage.bcd
[Indigo]<Cedar5.3>Interpreter>InterpreterPackage.bcd
[Indigo]<Cedar5.3>Viewers>Viewers.bcd
[Indigo]<Cedar5.2>TRope>TRope.bcd
[Indigo]<Cedar5.3>TJaM>TJaM.bcd
[Indigo]<Cedar5.3>Tioga>Tioga.bcd
[Indigo]<Cedar5.3>ViewerIO>ViewerIOImpl.bcd
[Indigo]<Cedar5.3>EditTool>EditTool.bcd
[Indigo]<Cedar5.3>ReadEvalPrint>ReadEvalPrintImpl.bcd
[Indigo]<Cedar5.3>CommandTool>CommandToolPackage.bcd
[Indigo]<Cedar5.3>InterpreterTool>InterpreterTool.bcd
[Indigo]<Cedar5.2>DebugTool>DebugTool.bcd
[Indigo]<Cedar5.3>DFCommands>DFCommands.bcd
[Indigo]<Cedar5.3>Watch>Watch.bcd
[Indigo]<Cedar5.3>Viewers>End.bcd/e

This is [Indigo]<Cedar5.3>Top>Basic.Loadees
	Levin on December 15, 1983 8:42 am
	Andrew Birrell on December 20, 1983 2:24 pm
	Doug Wyatt on January 9, 1984 5:34 pm
	Russ Atkinson on January 9, 1985 3:06:51 pm PST

Local switches recognized by LoaderDriver:
  /d: causes the debugger to be called via DebuggerSwap.CallDebugger after the BCD's have all been loaded but before the specified BCD is started
  /l: causes Loader.Instantiate to be passed codeLinks: TRUE (the default). /-l causes Loader.Instantiate to be passed codeLinks: FALSE 
  /t: causes the LoaderDriver to release its use of the physical user terminal BEFORE starting this package. This is not needed by present packages.
  /e: causes the LoaderDriver to stop parsing the command file after this set of switches.

Any global switch (including /e) causes the LoaderDriver to stop parsing the command file.