{File name: InitDLion12.mc
Purcell 1-Jul-84 18:27:07 clear page 14000 in add to IOPage
Purcell 1-Jul-84 18:27:07 clear page 20000
Purcell 1-Jul-84 17:46:10
File name: InitDLion.mc
Description: Mesa Emulator initialization,
Last Edited by Amy Fasnacht: 13-Sep-83 16:03:33 Add support for 24-bit VA space
Last Edited by Daniels: 5-Aug-83 10:57:41 uPMask ← uPMask2 ← 1FF8 (was 0FFC)
Last Edited by Amy Fasnacht: September 22, 1982 5:12 PM Add uTMErRst initialization for MagTape
Last Edited by Amy Fasnacht: September 22, 1982 5:12 PM Delete uStartScan initialization
Last Edited by Amy Fasnacht: August 5, 1982 1:49 PM Change IOPage references
Last Edited by Amy Fasnacht: June 29, 1982 9:11 AM Add LSEP initializations
Last Edited by Amy Fasnacht: May 18, 1982 10:19 AM Change display registers
Last Edited by Amy Fasnacht: February 9, 1982 10:48 AM Replace Trident/Shugart conditional assembly initializations with branches based on CPBootDevice (accomodates etherbooting).
Last Edited by Jim Frandeen: February 2, 1982 1:22 PM Initialize uE3FF.
Last Edited by Amy Fasnacht: January 6, 1982 4:01 PM Bug fix - branch to DisplayInit after initializing SAx000 registers
Last Edited by Jim Frandeen: December 17, 1981 1:03 PM Use only two registers for initialization.
Last Edited by J. Furst: December 8, 1981 2:07 PM, Added new Trident reg. UF000
Sandman : November 17, 1981 1:24 PM New instruction set
Last Edited by Jim Frandeen: November 8, 1981 5:00 PM initialize new display registers for smooth scrolling
Last Edited by Neely: October 13, 1981 11:20 AM Trident Integration
Last Edited by Jim Frandeen: April 1, 1981 2:09 PM: initialize UtbFlags
Author: Sandman,
}
Reserve[0F6F]; Reserve[0F78]; Reserve[0F7F,0FFF];{Kernel}
SetTask[0];
{NOTE: we must use only two regisers (dY and dZ) for initialization so that register usage will not conflict with booting. For example, Protected.mc uses three registers to check for Ethernet timeout. We do Display initialization last since the Display microcode counts on two of its registers being initialized, and we use these two registers for all other initialization.}
IfEqual[Config, 3, SkipTo[SetEtherBoot],];
IfEqual[Config, 2, SkipTo[SetTrident],];
OnceOnlyInit:CPBootDevice ← 0,c1;
Noop,c2;
SkipTo[SkipSetTrident];
SetTrident!
OnceOnlyInit:dY ← 0C,c1;
CPBootDevice ← dY,c2;
SkipSetTrident!
Noop,c3;
dZ ← LShift1 0FF, SE←1, CANCELBR[$,0F],c1;
SkipTo[StartInit];
SetEtherBoot!
OnceOnlyInit:dZ ← LShift1 0FF, SE←1, CANCELBR[$,0F],c1;
StartInit!
dZ ← LShift1 dZ, SE←1,c2;
u3FF ← dZ, dZ ← dZ LShift1, SE←1,c3;
{MCtl ← ** dZ + 1,}c1;
u7FF ← dZ, dZ ← dZ LShift1, SE←1,c2;
dZ ← dZ LShift1, SE←1,c3;
u1FFF ← dZ, dZ ← dZ LShift1, SE←1,c1;
u3FFF ← dZ,c2;
dZ ← 64,c3;
dZ ← dZ LRot8, Refresh,c1;
UtbFlags ← dZ,c2;
dZ ← LShift1 0F, SE←1,c3;
dZ ← dZ LRot8, ClrIntErr,c1;
dZ ← dZ or 0F8,c2;
uPMask ← dZ,c3;
uPMask2 ← dZ, Refresh,c1;
dZ ← 0E,c2;
dZ ← dZ LRot12,c3;
uPPMask ← dZ, Refresh,c1;
dZ ← RShift1 0, SE ← 1,c2;
u8000 ← dZ,c3;
MCtl ← dZ or 2, c1;
, c2;
, c3;
dY ← 0, Refresh,c1;
dZ ← IOPage,c2;
dZ ← dZ LRot8, c3;
rhdZ ← IOPageHigh,c1;
uIOPage ← dZ,c2;
Noop,c3;
{clear I/O page, TOS = 0}
IOPageLoop:
MAR ← [rhdZ, dZ+0],c1;
MDR ← dY{=0}, dZ ← dZ + 1, PgCrOvDisp,c2;
uPCCross ← 0, BRANCH[IOPageLoop,$,1],c3;
{clear MESA (2nd) I/O page, TOS = 0}
rhdZ ← 1{2}{IOPageHigh},c1;
dZ ← 40{0},c2;
{uIOPage ← 0{dZ},}dZ ← dZ LRot8, {Noop,}c3;
IOPageLoop2:
MAR ← [rhdZ, dZ+0],c1;
MDR ← dY{=0}, dZ ← dZ + 1, PgCrOvDisp,c2;
uPCCross ← 0, BRANCH[IOPageLoop2,$,1],c3;
EtherInit:
Refresh,c1;
dZ ← 55,c2;
dZ ← dZ LRot8 or dZ,c3;
uEPreamble ← dZ, Refresh,c1;
dZ ← dZ or 0C0,c2;
uELastPreamble ← dZ,c3;
dZ ← LShift1 0FF, SE ← 1 {1FF},c1;
dZ ← LShift1 dZ, SE ← 1 {3FF},c2;
uE3FF ← dZ,c3;
MagTapeInit:
rTWc ← CTClrMEr,c1;
rTWc ← rTWc LRot8,c2;
uTMErRst ← rTWc,c3;
DiskInit:
Xbus ← CPBootDevice, XDisp,c1;
BRANCH[SAx000Init, TridentInit, 7],c2;
SAx000 Init:
Noop,c3;
{initialize 16 bit const used to clear mem errorflags}
dZ ← CClearMemError,c1;
dZ ← dZ LRot8,c2;
U0C00 ← dZ,c3;
{form top byte of status mask, bottom byte depends on drive connected}
dY ← CHeadMsk,c1;
dY ← dY LRot8,c2;
Xbus ← KStatus, XwdDisp,c3;
dZ ← CSA1MaxSectTst, BRANCH[SetSA1Const, SetSA4Const,2],c1;
SetSA4Const:
{sector test number}
dZ ← CSA4MaxSectTst, c2, at[3,4,SetSA1Const];
UMaxSectTst ← dZ,c3;
{synchronization word and error mask}
dZ ← dZ xor ~dZ,c1;
dY ← dY or CSA4ErrMsk, GOTO[SetURegs],c2;
SetSA1Const:
UMaxSectTst ← dZ,c2, at[2,4,SetSA4Const];
dZ ← CAddrMkHi,c3;
{address mark and error mask}
dZ ← dZ LRot8,c1;
dY ← dY or CSA1ErrMsk,c2;
SetURegs:dZ ← dZ or CAddrMkLo,c3;
{save sync word or address mark; set status mask}
USyncAdrMk ← dZ, Refresh,c1;
UStatusMsk ← dY,c2;
GOTO[DisplayInit],c3;
TridentInit:
Noop,c3;
{Initialization of U0C00 -- A 16 bit constant used to clear memory error flags}
dZ ← 0C,c1;
dZ ← dZ LRot8,c2;
U0C00 ← dZ,c3;
{Initialization of U0C04 -- A 16 bit constant used to reset Control Tag in the Command register}
dZ ← dZ or 4,c1;
U0C04 ← dZ,c2;
dZ ← 2C,c3;
{Initialization of U2C04 -- A 16 bit constant used to set the Head Tag in the Command register}
dZ ← dZ LRot8,c1;
dZ ← dZ or 4,c2;
U2C04 ← dZ,c3;
{Initialize U2C05 register and prepare initializing UCStatMask.}
dZ ← dZ or 1,c1;
U2C05 ← dZ,c2;
dZ ← 4E,c3;
{Initialize UCStatMask with 4E06.}
dZ ← dZ LRot8,c1;
dZ ← dZ or 6,c2;
UCStatMask ← dZ,c3;
{Initialization of UF001 -- A 16 bit constant used to turn on "Sequence" for all four drives in the Control register}
dZ ← 0F0,c1;
dZ ← dZ LRot8,c2;
UF000 ← dZ,c3;
{Initialization of UF001 -- A 16 bit constant used to turn on "Sequence" for all four drives in the Control register}
dZ ← 1F,c1;
dZ ← dZ LRot12,c2;
UF001 ← dZ,c3;
{Initialize U0400 register}
dZ ← 4,c1;
dZ ← dZ LRot8,c2;
U0400 ← dZ,c3;
{Initialization of U4000 and KCmd register (TestCtl = 1) and USIP with 0.}
KRegInit:KCmd ← dZ ← dZ LRot4,c1;
U4000 ← dZ,c2;
USIP ← 0,c3;
{Initialize KCtl with 0F000 .}
dZ ← 0F,c1;
KCtl ← dZ LRot12,c2;
dZ ← 0FF + 1,c3;
{Initialize U0100.}
EndInit:U0100 ← dZ, Refresh,c1;
Noop,c2;
Noop, ,c3;
DisplayInit:
rhdY ← IOPageHigh, Refresh,c1;
dZ ← uIOPage,c2;
Noop,c3;
Noop,c1;
dZ ← dZ + IOPage.DCSB.cursorMap,c2;
uInitCurMapAddr ← dZ,c3;
dZ ← 88,c1;
dZ ← dZ LRot8,c2;
dZ ← dZ or 22 {8822},c3;
uInitBorder ← dZ, Refresh,c1;
dZ ← PicLenShifted,c2;
dY ← dZ LRot8,c3;
uInitCurBufAddr ← dY,c1;
dZ ← LRot1 dZ,c2;
dZ ← LRot1 dZ, rhdZ ← 0,c3;
uInitPicLength ← dZ {328’x}, Refresh,c1;
uClockBits ← 0,c2;
Noop,c3;
ClrDPRq,c1;
dZ ← uPatchCount ← 0,c2;
dY ← 7,c3;
uCopyCount ← dY, Refresh,c1;
uPatchLine ← dZ xor ~dZ,c2;
dY ← 3F,c3;
dY ← dY LRot4,c1;
u3F0 ← dY,c2;
dY ← 0FC,c3;
dY ← dY LRot8,c1;
uNormalFifo ← dY,c2;
LsepInit:dY ← 10,c3;
uDisableLSEP ← dY,c1;
dY ← 15,c2;
uEndBandScan ← dY,c3;
dY ← 1B,c1;
uStartActive ← dY,c2;
dY ← 1, GOTO[DoneOnceOnlyInit]c3;