[Cyan]<DATools6.1>EU3>EUControlImpl.mesa!2

EUControlImpl.mesa

Created by: Louis Monier September 26, 1986 7:19:00 pm PDT

Last Edited by: Louis Monier January 20, 1987 6:34:44 pm PST

Bertrand Serlet January 23, 1987 2:27:59 pm PST

DIRECTORY Boole, BooleCore, CoreCreate, CoreOps, CoreProperties, Dragon, EUInner, EUUtils, PWCore, PWCoreRoute;

EUControlImpl: CEDAR PROGRAM

IMPORTS Boole, BooleCore, CoreCreate, CoreOps, CoreProperties, EUUtils, PWCore

EXPORTS EUInner =

BEGIN OPEN Boole, BooleCore, CoreCreate, EUInner;

-- The whole control: three pieces assembled with two channels

CreateControl: PUBLIC PROC [] RETURNS [ct: CellType] ~ {

ct ← EUUtils.Fetch["Control"];

IF ct=NIL THEN {

ct ← EUUtils.Extract["Control.sch"];

EUUtils.Store["Control", ct];

};

-- Ram decoder plus a few odds and ends

CreateRamControl: PUBLIC PROC [] RETURNS [ct: CellType] ~ {

ct ← EUUtils.Fetch["RamControl"];

IF ct=NIL THEN {

ct ← CreateRamControlFromEquations[];

EUUtils.Store["RamControl", ct];

};

-- Standard cell block: carry, cc and DBus

CreateSCControl: PUBLIC PROC [] RETURNS [ct: CellType] ~ {

ct ← EUUtils.Fetch["SCControl"];

IF ct=NIL THEN {

ct ← EUUtils.Extract["SCControl.sch"];

EUUtils.Store["SCControl", ct];

};

-- Control for datapath

CreateDPControl: PUBLIC PROC [] RETURNS [ct: CellType] ~ {

ct ← EUUtils.Fetch["DPControl"];

IF ct=NIL THEN {

ct ← CreateDPControlFromEquations[];

EUUtils.Store["DPControl", ct];

};

ExprProc: TYPE ~ PROC [i: NAT ← 0] RETURNS [Expression];

AppendInput: PROC [public: Wire, wr: WR, inputD: Inputs] RETURNS [ins: Inputs]~ {

AppendOneInput: CoreOps.EachWireProc ~ {

IF wire.size#0 THEN RETURN;

ins ← CONS[[input: wire, driver: inv], ins]};

inv: CellType ← EUUtils.AlpsExtract["InputDriver.sch"];

ins ← inputD;

[] ← CoreOps.VisitWire[FindWire[public, wr], AppendOneInput];

};

AppendOutput: PROC [wire: WR, expr: Expression, clock: ROPE ← NIL, outputDrivers: Outputs] RETURNS [Outputs] ~ {

out: CellType ← EUUtils.AlpsExtract[IF clock=NIL THEN "OutputDriver.sch" ELSE "ClockedOutputDriver.sch"];

RETURN [CONS[

[driver: out,

pas: IF clock=NIL THEN LIST[["VRef", "VRef"]]

ELSE LIST[["Clock", clock], ["VRef", "VRef"]],

output: wire, expr: expr],

outputDrivers]];

};

-- To be generated by Alps (Ave, Serlet, programatori te salutant!)

CreateRamControlFromEquations: PROC RETURNS [cellType: CellType] = {

BEGIN

inputDrivers: Inputs ← NIL;

outputDrivers: Outputs ← NIL;

expr: Expression ← NIL;

selA: Wire ← Seq["selA", EUUtils.nRows]; -- outputs of the y-decoder

selB: Wire ← Seq["selB", EUUtils.nRows];

selC: Wire ← Seq["selC", EUUtils.nRows];

selALow: Wire ← Seq["selALow", 4]; -- outputs of the x-decoder

selBLow: Wire ← Seq["selBLow", 4];

selCLow: Wire ← Seq["selCLow", 4];

selRam: Wire ← WireList[wrs: LIST[selA, selB, selC, selALow, selBLow, selCLow], name: "selRam"];

-- public

public: Wire ← WireList[LIST[

"Vdd", "Gnd", "VRef", "phA",

selRam,

Seq["ramAdr", 24],

Seq["ramAdr", 3, Wires[Seq["Hi", 6], Seq["Low", 2]]],

"reject", "hold", "read", "write",

Seq["dStateAd", 4], "enWrtIFUPhA", "enWrtIFUPhB",

EUUtils.GenRegSelWire[EUUtils.fieldRow]]]; -- selFieldSrc[0..2)

-- All the wires used as inputs (numbers)

dStateAd: Wire ← FindWire[public, "dStateAd"];

ramAdr: Wire ← FindWire[public, "ramAdr"];

aHi: Wire ← Range[ramAdr, 0, 6];

aLow: Wire ← Range[ramAdr, 6, 2];

bHi: Wire ← Range[ramAdr, 8, 6];

bLow: Wire ← Range[ramAdr, 14, 2];

cHi: Wire ← Range[ramAdr, 16, 6];

cLow: Wire ← Range[ramAdr, 22, 2];

cAdr: Wire ← Range[ramAdr, 16, 8];

-- Expressions (booleans)

read: Variable ← FindWire[public, "read"];

write: Variable ← FindWire[public, "write"];

reject: Variable ← FindWire[public, "reject"];

nReject: Expression ← Not[reject];

hold: Variable ← FindWire[public, "hold"];

nHold: Expression ← Not[hold];

AppendRamDriver: PROC [output: WR, expr: Expression] ~ {

outputDrivers ← AppendOutput[output , expr, "phA", outputDrivers];

};

IF aLow.size#2 OR bLow.size#2 OR cLow.size#2 THEN ERROR;

IF aHi.size#6 OR bHi.size#6 OR cHi.size#6 THEN ERROR;

-- Input inverters to the Alps blocks

inputDrivers ← AppendInput[public, "reject", inputDrivers]; -- 1

inputDrivers ← AppendInput[public, "hold", inputDrivers]; -- 1

inputDrivers ← AppendInput[public, "read", inputDrivers]; -- 1

inputDrivers ← AppendInput[public, "write", inputDrivers]; -- 1

inputDrivers ← AppendInput[public, "dStateAd", inputDrivers]; -- 4

inputDrivers ← AppendInput[public, ramAdr, inputDrivers]; -- 24

-- Enable Write on the KBus (IFU side); by luck, same timing as ram

outputDrivers ← AppendOutput["enWrtIFUPhA", EqualInt[cAdr, EUUtils.IFUAdr], NIL, outputDrivers];

-- enWrtIFUPhA ← cAdr=IFUAdr

outputDrivers ← AppendOutput["enWrtIFUPhB", false, NIL, outputDrivers];

-- enWrtIFUPhB ← false (if no // debug, never used, so could be removed)

-- Output drivers, all of the same type: they follow PhA

FOR i: INT IN [0..EUUtils.nRows) DO

AppendRamDriver[selA[i], EqualInt[aHi, i]];

-- selHi[i][a] ← aAdrH=i

AppendRamDriver[selB[i], EqualInt[bHi, i]];

-- selHi[i][b] ← bAdrH=i

expr ← IF i=EUUtils.marAdr/4 THEN Or[reject, EqualInt[cHi, i]]

ELSE And[nReject, EqualInt[cHi, i]];

AppendRamDriver[selC[i], expr];

-- selHi[i][c] ← (cAdrH=i).~reject for i#marAdr/4

-- selHi[marAdr/4][c] ← (cAdrH=i)+reject

ENDLOOP;

FOR i: INT IN [0..4) DO

AppendRamDriver[selALow[i], EqualInt[aLow, i]];

-- selLow[i][a] ← aAdrL=i

AppendRamDriver[selBLow[i], EqualInt[bLow, i]];

-- selLow[i][b] ← bAdrL=i

expr ← IF i=EUUtils.marAdr MOD 4 THEN Or[reject, EqualInt[cLow, i]]

ELSE And[nReject, EqualInt[cLow, i]];

AppendRamDriver[selCLow[i], expr];

-- selLow[i][c] ← (cAdrL=i).~reject for i#marAdr MOD 4

-- selHi[marAdr MOD 4][c] ← (cAdrL=i)+reject

ENDLOOP;

-- Control for Field register; located here because it requires cAdr; also same timing as ram

outputDrivers ← AppendOutput["selFieldSrc[0]",

And[nReject, nHold, EqualInt[cAdr, EUUtils.fieldAdr]], "phA", outputDrivers];

-- selFieldSrc[0] ← (cAdr=fieldAdr).~reject.~hold.PhA

outputDrivers ← AppendOutput["selFieldSrc[1]",

And[write, EqualInt[dStateAd, EUUtils.fieldRow]], NIL, outputDrivers];

-- selFieldSrc[1] ← (dStateAd=field).write

outputDrivers ← AppendOutput["selFieldSrc[2]",

And[read, EqualInt[dStateAd, EUUtils.fieldRow]], NIL, outputDrivers];

-- selFieldSrc[2] ← (dStateAd=field).read

cellType ← AlpsCell[

name: "RamControl",

public: public,

inputs: inputDrivers,

outputs: outputDrivers,

props: CoreProperties.Props[[$ContactPolyMetal2, NEW[INT ← 20]]]

];

END;

};

-- Creates the control for the bottom of the Datapath

-- 716*2737, 28 inputs, and 89 outputs

CreateDPControlFromEquations: PROC RETURNS [cellType: CellType] = {

BEGIN

-- Control of input muxes for pipeline registers, and their DBus

MakeRegSelExpr: PROC [reg: EUUtils.PipeRange, exprProc: ExprProc, clock: ROPE ← NIL] ~ {

size: NAT ← EUUtils.sources[reg].sizeSel;

FOR i: INT IN [0..size) DO

outputDrivers ← AppendOutput[

wire: Index[EUUtils.sources[reg].nameSel, i],

expr: exprProc[i],

clock: clock,

outputDrivers: outputDrivers];

ENDLOOP;

outputDrivers ← AppendOutput[

wire: Index[EUUtils.sources[reg].nameSel, size],

expr: And[write, EqualInt[dStateAd, reg]],

clock: NIL,

outputDrivers: outputDrivers];

outputDrivers ← AppendOutput[

wire: Index[EUUtils.sources[reg].nameSel, size+1],

expr: And[read, EqualInt[dStateAd, reg]],

clock: NIL,

outputDrivers: outputDrivers];

};

MakeTristateSelExpr: PROC [reg: EUUtils.PipeRange, exprProc: ExprProc, clock, enWClock: ROPE ← NIL] ~ {

size: NAT ← EUUtils.sources[reg].sizeSel;

FOR i: INT IN [0..size) DO

outputDrivers ← AppendOutput[

wire: Index[EUUtils.sources[reg].nameSel, i],

expr: exprProc[i],

clock: clock,

outputDrivers: outputDrivers];

ENDLOOP;

outputDrivers ← AppendOutput[

wire: Index[EUUtils.sources[reg].nameSel, size], -- read cBus during debugging

expr: exprProc[size],

clock: clock,

outputDrivers: outputDrivers];

outputDrivers ← AppendOutput[

wire: Index[EUUtils.sources[reg].nameSel, size+1], -- enable write on cBus

expr: exprProc[size+1],

clock: enWClock,

outputDrivers: outputDrivers];

};

MakeSelExpr: PROC [reg: EUUtils.PipeRange, exprProc: ExprProc, clock, enWClock: ROPE ← NIL] ~ {

IF EUUtils.sources[reg].tristate THEN MakeTristateSelExpr[reg, exprProc, clock, enWClock]

ELSE MakeRegSelExpr[reg, exprProc, clock];

};

inputDrivers: Inputs ← NIL;

outputDrivers: Outputs ← NIL;

public: Wire ← Union[

WireList[LIST["Vdd", "Gnd", "phA", "phB", "nPhB", Seq["selCarry", 5], "enWrtPBusPhA", "enWrtPBusPhB", Seq["ctrl8", 8], "writePBus", "res3BisP", "reject", Seq["aluOp", 4], "hold", "read", "write", Seq["dStateAd", 4], "VRef", Seq["op", 5] ]],

Wires[EUUtils.GenRegSelWire[EUUtils.leftRow],

EUUtils.GenRegSelWire[EUUtils.rightRow],

EUUtils.GenRegSelWire[EUUtils.st2ARow],

EUUtils.GenRegSelWire[EUUtils.st2BRow],

EUUtils.GenRegSelWire[EUUtils.st3ARow],

EUUtils.GenRegSelWire[EUUtils.kRegRow],

EUUtils.GenRegSelWire[EUUtils.r2BRow],

EUUtils.GenRegSelWire[EUUtils.r3ARow],

EUUtils.GenRegSelWire[EUUtils.r3BRow],

EUUtils.GenRegSelWire[EUUtils.dataInRow]],

Wires[Seq["shift", 6], Seq["sh", 33]]];

-- All the wires used as inputs (numbers)

ctrl8: Wire ← FindWire[public, "ctrl8"];

leftSrc: Wire ← Range[ctrl8, 1, 2];

rightSrc: Wire ← Range[ctrl8, 3, 3];

st2ASrc: Wire ← Range[ctrl8, 6, 2];

shift: Wire ← FindWire[public, "shift"];

aluOp: Wire ← FindWire[public, "aluOp"];

dStateAd: Wire ← FindWire[public, "dStateAd"];

-- Expressions (booleans)

reject: Variable ← FindWire[public, "reject"]; -- latched on PhB in the pad

nReject: Expression ← Not[reject];

read: Variable ← FindWire[public, "read"];

write: Variable ← FindWire[public, "write"];

hold: Variable ← FindWire[public, "hold"];

nHold: Expression ← Not[hold];

fetch: Variable ← FindWire[public, "res3BisP"];

store: Variable ← FindWire[public, "writePBus"];

st3AisC: Variable ← FindWire[public, ctrl8[0]];

-- PhA latches

LeftExpr: ExprProc = {RETURN[And[nReject, nHold, EqualInt[leftSrc, i]]]};

selLeftSrc[i] ← PhA . (leftSrc=i) . ~reject . ~hold

RightExpr: ExprProc = {RETURN[And[nReject, nHold, EqualInt[rightSrc, i]]]};

-- selRightSrc[i] ← PhA . (rightSrc=i) . ~reject . ~hold

St2AExpr: ExprProc = {RETURN[And[nReject, nHold, EqualInt[st2ASrc, i]]]};

-- selSt2ASrc[i] ← PhA . (st2ASrc=i) . ~reject . ~hold

R3AExpr: ExprProc = {RETURN[And[nReject, nHold]]};

-- selRes3ABSrc ← PhA . ~reject . ~hold

St3AExpr: ExprProc = {RETURN[

SELECT i FROM

0 => And[nReject, nHold, Not[st3AisC]],

1 => And[nReject, nHold, st3AisC],

ENDCASE => ERROR]};

-- selSt3ABSrc[st2B] ← PhA . ~st3AisC . ~reject . ~hold

-- selSt3ABSrc[cBus] ← PhA . st3AisC . ~reject . ~hold

-- PhB latches

KRegExpr: ExprProc = {RETURN[nHold]};

-- selKRegAdr ← PhB . ~hold

R2BExpr: ExprProc = {RETURN[

SELECT i FROM

0 => And[nHold, Nor[OpIs[FOP], OpIs[BndChk]]], -- aluOut

1 => And[nHold, OpIs[FOP]], -- fuOut

2 => And[nHold, OpIs[BndChk]], -- left

ENDCASE => ERROR]};

-- selRes2BASrc[aluOut] ← PhB . ~hold . (aluOp#FOP AND aluOp#BndChk)

-- selRes2BASrc[fuOut] ← PhB . ~hold . (aluOp=FOP)

-- selRes2BASrc[left] ← PhB . ~hold . (aluOp=BndChk)

St2BExpr: ExprProc = {RETURN[nHold]};

-- selSt2BASrc ← PhB . ~hold

R3BExpr: ExprProc = {RETURN[

SELECT i FROM

0 => nHold, -- input

1 => And[write, EqualInt[dStateAd, EUUtils.r3BRow]], -- read cBus

2 => Or[And[nHold, Nand[fetch, nReject]], And[read, EqualInt[dStateAd, EUUtils.r3BRow]]], -- enable Write

The bug in EU3: 2 => Or[And[nHold, Nor[fetch, nReject]], And[read, EqualInt[dStateAd, EUUtils.r3BRow]]], -- enable Write

ENDCASE => ERROR]};

-- selRes3BASrc[0] ← PhB . ~hold

-- selRes3BASrc[1] ← PhB . write . (dStateAd=r3B)

-- selRes3BASrc[enW] ← nPhB . ( ~hold.(~fetch+reject) + read.(dStateAd=r3B) )

DataInExpr: ExprProc = {RETURN[

SELECT i FROM

0 => nHold, -- input

1 => And[write, EqualInt[dStateAd, EUUtils.dataInRow]], -- read cBus

2 => Or[And[nHold, fetch, nReject], And[read, EqualInt[dStateAd, EUUtils.dataInRow]]], -- enable Write

ENDCASE => ERROR]};

-- selDataInSrc[0] ← PhB . ~hold

-- selDataInSrc[enW] ← nPhB . ( ~hold.fetch.~reject + read.(dStateAd=dataIn) )

-- Special guys

CBusExpr: ExprProc = {RETURN[ -- use the non-latched reject and a simple driver, no clock!!!

SELECT i FROM

0 => Nand[nReject, store, fetch], -- r3B

1 => And[nReject, nHold, fetch], -- dataIn

2 => Or[EqualInt[dStateAd, EUUtils.cBusRow], Not[read]],

ENDCASE => ERROR]};

-- selCBusSrc[r3B] ← (reject + ~fetch + ~store)

-- selCBusSrc[dataIn] ← ~reject . ~hold . fetch

-- selCBusSrc[enW] ← (dStAd=cBus) + ~read

-- Field Unit

ShExpr: ExprProc = {RETURN[EqualInt[shift, i]]}; -- sh[i] ← (shift=i)

-- ALU

CINisCABExpr: ExprProc = {RETURN[Or[OpIs[SAdd], OpIs[SSub], OpIs[UAdd], OpIs[USub]]]};

InvertCINExpr: ExprProc = {RETURN[Or[OpIs[VSub], OpIs[LSub], OpIs[BndChk], OpIs[SSub], OpIs[USub]]]};

CBAisZeroExpr: ExprProc = {RETURN[Or[OpIs[SAdd], OpIs[SSub], OpIs[LAdd], OpIs[LSub]]]};

CBAisCoutExpr: ExprProc = {RETURN[Or[OpIs[UAdd], OpIs[USub]]]};

InvertCoutExpr: ExprProc = {RETURN[Or[OpIs[VSub], OpIs[LSub], OpIs[BndChk], OpIs[SSub], OpIs[USub]]]};

InvertCoutExpr: ExprProc = {RETURN[OpIs[USub]]};

OpExpr: ExprProc = {

RETURN[SELECT i FROM -- add sub xor or and

0 => Not[InSet[sub]], -- 1 0 1 1 1

1 => InSet[sub, and], -- 0 1 0 0 1

2 => InSet[add, xor], -- 1 0 1 0 0

3 => Not[InSet[add]], -- 0 1 1 1 1

4 => Not[InSet[sub]], -- 1 0 1 1 1

ENDCASE => ERROR];

};

OpType: TYPE = {add, sub, xor, or, and, none};

OpIs: PROC [op: Dragon.ALUOps] RETURNS [expr: Expression] ~ {

expr ← EqualInt[aluOp, Dragon.ALUOps[op].ORD];

};

InSet: PROC [t1, t2: OpType ← none] RETURNS [expr: Expression] ~ {

AddMatchType: PROC [op: OpType] RETURNS [expr: Expression]~ {

expr ← SELECT op FROM

add => Or[OpIs[VAdd2], OpIs[SAdd], OpIs[LAdd], OpIs[VAdd], OpIs[UAdd]],

sub => Or[OpIs[BndChk], OpIs[SSub], OpIs[LSub], OpIs[VSub], OpIs[USub]],

xor => OpIs[Xor],

or => Or[OpIs[Or], OpIs[FOP]],

and => OpIs[And],

ENDCASE => ERROR;

};

expr ← AddMatchType[t1];

IF t2#none THEN expr ← Or[expr, AddMatchType[t2]];

};

WrPBusPhAExpr: ExprProc = {RETURN[And[nReject, nHold]]};

-- enWrtPBusPhA ← ~reject AND ~hold

WrPBusPhBExpr: ExprProc = {RETURN[And[store, nHold]]};

-- enWrtPBusPhB ← store AND ~hold

-- Inputs from right to left (away from driver)

-- Input Drivers for the (few) signals coming straight from the pads

inputDrivers ← AppendInput[public, "reject", inputDrivers]; -- 1

inputDrivers ← AppendInput[public, "hold", inputDrivers]; -- 1

inputDrivers ← AppendInput[public, "write", inputDrivers]; -- 1

inputDrivers ← AppendInput[public, "read", inputDrivers]; -- 1

inputDrivers ← AppendInput[public, "res3BisP", inputDrivers]; -- 1

inputDrivers ← AppendInput[public, "writePBus", inputDrivers]; -- 1

inputDrivers ← AppendInput[public, "aluOp", inputDrivers]; -- 4

inputDrivers ← AppendInput[public, "dStateAd", inputDrivers]; -- 4

-- Input Drivers for the signals coming from the Data Path

inputDrivers ← AppendInput[public, "ctrl8", inputDrivers]; -- 8

inputDrivers ← AppendInput[public, "shift", inputDrivers]; -- 6

-- Outputs from bottom to top

-- To pad frame

outputDrivers ← AppendOutput["enWrtPBusPhA", WrPBusPhAExpr[], , outputDrivers];

outputDrivers ← AppendOutput["enWrtPBusPhB", WrPBusPhBExpr[], , outputDrivers];

-- Bottom Registers

MakeSelExpr[EUUtils.dataInRow, DataInExpr, "phB", "nPhB"];

MakeSelExpr[EUUtils.r3BRow, R3BExpr, "phB", "nPhB"];

MakeSelExpr[EUUtils.r3ARow, R3AExpr, "phA"];

MakeSelExpr[EUUtils.st3ARow, St3AExpr, "phA"];

MakeSelExpr[EUUtils.st2BRow, St2BExpr, "phB"];

-- Field unit control

FOR i: NAT DECREASING IN [0..33) DO

outputDrivers ← AppendOutput[Index["sh", i], ShExpr[i], NIL, outputDrivers];

ENDLOOP;

-- res2BA Register

MakeSelExpr[EUUtils.r2BRow, R2BExpr, "phB"];

-- ALU control

FOR i: NAT IN [0..5) DO

outputDrivers ← AppendOutput[Index["op", i], OpExpr[i], NIL, outputDrivers];

ENDLOOP;

-- Top Registers

MakeSelExpr[EUUtils.st2ARow, St2AExpr, "phA"];

MakeSelExpr[EUUtils.leftRow, LeftExpr, "phA"];

MakeSelExpr[EUUtils.rightRow, RightExpr, "phA"];

MakeSelExpr[EUUtils.kRegRow, KRegExpr, "phB"];

-- Carry

outputDrivers ← AppendOutput[Index["selCarry", 0], CBAisZeroExpr[],, outputDrivers];

outputDrivers ← AppendOutput[Index["selCarry", 1], CBAisCoutExpr[],, outputDrivers];

outputDrivers ← AppendOutput[Index["selCarry", 2], InvertCoutExpr[],, outputDrivers];

outputDrivers ← AppendOutput[Index["selCarry", 3], CINisCABExpr[],, outputDrivers];

outputDrivers ← AppendOutput[Index["selCarry", 4], InvertCINExpr[],, outputDrivers];

-- Generate the block Alps

cellType ← PWCore.RotateCellType[

AlpsCell[name: "UpsideDownDPControl",

public: public, inputs: inputDrivers, outputs: outputDrivers,

props: CoreProperties.Props[[$ContactPolyMetal2, NEW[INT ← 20]]]],

$FlipY];

[] ← CoreOps.SetCellTypeName[cellType, "DPControl"];

END;

};

END.