// Mcommon.d -- structures common to both machine-independent and // machine-dependent parts of Midas // Last edited: 29 November 1979 // Structure of vector used to preserve state across RunProg // MachRunning is only word used by machine-dependent code. structure MStatus: [ RunProg word //1 if RunProg, 2 if Dtach, //0 afterwards CFileStream word CFOutStream word TextCmdOutStream word ShowActionForm word MachRunning word g0 word //extra ] //Structure of MEMCON and REGCON tables structure MRType: [ RunAccess bit //Register/memory can be accessed while //machine is running; read ok if //Passive bit is also true; write ok //if PassiveWrite is also true. Defined bit //Register/memory is defined, so it can be //examined on the display (some regs/mems //are fakes used for various reasons) LdFlush bit //Flush syms in "Load" or "Dump" Retain bit //Retain syms in "LoadData" HasParity bit //Appears in PE-scan menu Passive bit //Value can be read passively ReadOnly bit //Value is read-only PassiveWrite bit //Value can be written without side effects MaybeAddresses bit //Look for symbols with SearchBlocks DefRadix bit 2 //Coded 0=octal, 1=decimal, 2=hex, DefMode bit 2 //0=numeric, 1=SearchBlocks, 2=symbolic AutoPrettyPrint bit //A+1, A-1 will prettyprint value AlwaysUpdate bit //Always updated on the display TestAll bit //Tested by TestAll ] //Structure of GoVec structure Go: [ AVec word 2 Task word RunP byte Branch byte ] structure BT: //BlockTable entry [ Core word Dirty bit Kind bit 2 BlockAddr bit 13 ] manifest [ //Mouse buttons TopButton = #4; MiddleButton = #1; BottomButton = #2 //Number of MPD menu lines MaxLineN = 20 //Record file stuff needed by machine-independent code for symbol table //and by machine-dependent code for VA/AA tables. IMKind = 0 SymKind = 1 VAKind = 2 AAKind = 3 NPagesPerStandardBlock = 4 //Typically 7 words/symbol NPagesPerHeadBlock = 1 //Roughly 6 words/symbol block MaxBlockPages = 200 PageSize = 256 MaxInCoreBlocks = 15 //Length of BlockTable BlockSize = NPagesPerStandardBlock*PageSize BlockMask = BlockSize-1 //For D0VM BlockShift = 10 //For D0VM (must agree with BlockSize) //CantContinue reasons // machine-independent: didTest = 100000B didLoad = 40000B didPEscan = 20000B didCall = 10000B // machine-dependent: didLoadPage = 4000B didBoot = 2000B didIMXPE = 1000B didRBusPE = 400B didMemoryError = 200B didStkOvf = 100B didMultBP = 40B ] structure Bytes: [ Byte^0,(BlockSize+BlockSize-1) byte ]