24-Aug-81 14:20:45
UTVFC Module Test for H Revision: pass 1
On BREAKPOINT, press any key to continue.
SET-UP INSTRUCTIONS are Breakpoint Level 9.
SET BREAKPOINT LEVEL to 0 thru 9; any other key keeps present level.
PRESENT LEVEL = 9.
Replace the oscillator platform @ u7
by a dummy platform(which grounds crystal output ! ! ! ! ) ! ! !
During the test,we are driving AllowWU
and this in turn would drive NClk crazy
Attach pull-up resistor clip to S38 at A-18
Connect Test Probes as follows:
Test probe B clips to positions B-16
Test probe C clips to positions F-15
Test probe D clips to positions F-12
Test probe E clips to positions E-6
Particularly, the clip marked ECL-ONLY to position u23 -- THIS TEST IS NOT CHECKED
ON MULTIWIRE BOARDS
Type in desired starting Test Number.
Any keys other than 1 thru 9 cause start at Test 11
Starting Test selected = 11
If looping desired on selected test depress l; any other key continues to next test.
TEST 11 RUNNING
TEST 11 COMPLETE; Test Run Time = 370 milliseconds
TEST 12 RUNNING
TEST 12 COMPLETE; Test Run Time = 19 milliseconds
TEST 13 RUNNING
TEST 13 COMPLETE; Test Run Time = 525 milliseconds
TEST 21 RUNNING
TEST 21 COMPLETE; Test Run Time = 131 milliseconds
TEST 22 RUNNING
TEST 22 COMPLETE; Test Run Time = 2838 milliseconds
TEST 23 RUNNING
TEST 23 COMPLETE; Test Run Time = 213 milliseconds
TEST 31 RUNNING
TEST 31 COMPLETE; Test Run Time = 12730 milliseconds
TEST 32 RUNNING
TEST 32 COMPLETE; Test Run Time = 7792 milliseconds
TEST 33 RUNNING
FAILURE: SubTest 33.2.0; EvenLine ff is 0b; Should be = 1b. ,FLAKEY TEST
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 33.3.0; EvenLine ff is 1b; Should be = 0b. ,FLAKEY TEST
Depress q to quit; l to loop from start of test to failure; any other key to continue.
TEST 33 COMPLETE; Test Run Time = 52 milliseconds
TEST 34 RUNNING
TEST 34 COMPLETE; Test Run Time = 430 milliseconds
TEST 35 RUNNING
TEST 35 COMPLETE; Test Run Time = 109 milliseconds
TEST 41 RUNNING
TEST 41 COMPLETE; Test Run Time = 2511 milliseconds
TEST 42 RUNNING
TEST 42 COMPLETE; Test Run Time = 2511 milliseconds
TEST 43 RUNNING
TEST 43 COMPLETE; Test Run Time = 2510 milliseconds
TEST 44 RUNNING
TEST 44 COMPLETE; Test Run Time = 2509 milliseconds
TEST 51 RUNNING
TEST 51 COMPLETE; Test Run Time = 2486 milliseconds
TEST 52 RUNNING
TEST 52 COMPLETE; Test Run Time = 2509 milliseconds
TEST 53 RUNNING
TEST 53 COMPLETE; Test Run Time = 2510 milliseconds
TEST 54 RUNNING
TEST 54 COMPLETE; Test Run Ti..
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 41.2.6; Terminal 3 output is 4b; Should be = 0b. extra ones
Depress q to quit; l to loop from start of test to failure; any other key to continue.
TEST 41 COMPLETE; Test Run Time = 2487 milliseconds
TEST 42 RUNNING
TEST 42 COMPLETE; Test Run Time = 2511 milliseconds
TEST 43 RUNNING
TEST 43 COMPLETE; Test Run Time = 2510 milliseconds
TEST 44 RUNNING
TEST 44 COMPLETE; Test Run Time = 2509 milliseconds
TEST 51 RUNNING
TEST 51 COMPLETE; Test Run Time = 2486 milliseconds
TEST 52 RUNNING
TEST 52 COMPLETE; Test Run Time = 2510 milliseconds
TEST 53 RUNNING
TEST 53 COMPLETE; Test Run Time = 2509 milliseconds
TEST 54 RUNNING
TEST 54 COMPLETE; Test Run Time = 2509 milliseconds
TEST 61 RUNNING
TEST 61 COMPLETE; Test Run Time = 2227 milliseconds
TEST 62 RUNNING
TEST 62 COMPLETE; Test Run Time = 192 milliseconds
TEST 63 RUNNING
TEST 63 COMPLETE; Test Run Time = 25804 milliseconds
TEST 64 RUNNING
TEST 64 COMPLETE; Test Run Time = 2749 milliseconds
UTVFC Module Test: 1 passes completed.
Total Run time = 24663b miliseconds.
Depress q to quit;
c to run continuously;
any other key to repeat.
UTVFC Module Test for H Revision: pass 2
On BREAKPOINT, press any key to continue.
SET-UP INSTRUCTIONS are Breakpoint Level 9.
SET BREAKPOINT LEVEL to 0 thru 9; any other key keeps present level.
PRESENT LEVEL = 9.
Type in desired starting Test Number.
Any keys other than 1 thru 9 cause start at Test 11
Starting Test selected = 11
If looping desired on selected test depress l; any other key continues to next test.
TEST 11 RUNNING
TEST 11 COMPLETE; Test Run Time = 371 milliseconds
TEST 12 RUNNING
TEST 12 COMPLETE; Test Run Time = 19 milliseconds
TEST 13 RUNNING
TEST 13 COMPLETE; Test Run Time = 525 milliseconds
TEST 21 RUNNING
TEST 21 COMPLETE; Test Run Time = 132 milliseconds
TEST 22 RUNNING
TEST 22 COMPLETE; Test Run Time = 2837 milliseconds
TEST 23 RUNNING
TEST 23 COMPLETE; Test Run Time = 212 milliseconds
TEST 31 RUNNING
TEST 31 COMPLETE; Test Run Time = 12730 milliseconds
TEST 32 RUNNING
TEST 32 COMPLETE; Test Run Time = 7794 milliseconds
TEST 33 RUNNING
FAILURE: SubTest 33.2.0; EvenLine ff is 0b; Should be = 1b. ,FLAKEY TEST
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 33.3.0; EvenLine ff is 1b; Should be = 0b. ,FLAKEY TEST
Depress q to quit; l to loop from start of test to failure; any other key to continue.
TEST 33 COMPLETE; Test Run Time = 53 milliseconds
TEST 34 RUNNING
TEST 34 COMPLETE; Test Run Time = 429 milliseconds
TEST 35 RUNNING
TEST 35 COMPLETE; Test Run Time = 107 milliseconds
TEST 41 RUNNING
TEST 41 COMPLETE; Test Run Time = 2509 milliseconds
TEST 42 RUNNING
TEST 42 COMPLETE; Test Run Time = 2510 milliseconds
TEST 43 RUNNING
TEST 43 COMPLETE; Test Run Time = 2512 milliseconds
TEST 44 RUNNING
TEST 44 COMPLETE; Test Run Time = 2510 milliseconds
TEST 51 RUNNING
TEST 51 COMPLETE; Test Run Time = 2486 milliseconds
TEST 52 RUNNING
TEST 52 COMPLETE; Test Run Time = 2509 milliseconds
TEST 53 RUNNING
TEST 53 COMPLETE; Test Run Time = 2510 milliseconds
TEST 54 RUNNING
TEST 54 COMPLETE; Test Run Time = 2512 milliseconds
TEST 61 RUNNING
TEST 61 COMPLETE; Test Run Time = 2227 milliseconds
TEST 62 RUNNING
TEST 62 COMPLETE; Test Run Time = 192 milliseconds
TEST 63 RUNNING
TEST 63 COMPLETE; Test Run Time = 25805 milliseconds
TEST 64 RUNNING
TEST 64 COMPLETE; Test Run Time = 2749 milliseconds
UTVFC Module Test: 2 passes completed.
Total Run time = 24720b miliseconds.
Depress q to quit;
c to run continuously;
any other key to repeat.
UTVFC Module Test for H Revision: pass 3
On BREAKPOINT, press any key to continue.
SET-UP INSTRUCTIONS are Breakpoint Level 9.
TEST 11 RUNNING
TEST 11 COMPLETE; Test Run Time = 370 milliseconds
TEST 12 RUNNING
TEST 12 COMPLETE; Test Run Time = 19 milliseconds
TEST 13 RUNNING
TEST 13 COMPLETE; Test Run Time = 524 milliseconds
TEST 21 RUNNING
TEST 21 COMPLETE; Test Run Time = 132 milliseconds
TEST 22 RUNNING
TEST 22 COMPLETE; Test Run Time = 2837 milliseconds
TEST 23 RUNNING
TEST 23 COMPLETE; Test Run Time = 212 milliseconds
TEST 31 RUNNING
FAILURE: SubTest 31.1.2; I sakra ControlPhase is 0b; Should be = 1b. tenhle flip-flop je v
prdeli
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 31.1.3; I sakra ControlPhase is 0b; Should be = 1b. tenhle flip-flop je v
prdeli
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 31.1.0; I sakra ControlPhase is 0b; Should be = 1b. tenhle flip-flop je v
prdeli
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 31.2.0; Ssukin syn ContPh is 1b; Should be = 0b. chujovaja jachejka ne
rabotaet job tvoju matj
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 31.2.1; Ssukin syn ContPh is 1b; Should be = 0b. chujovaja jachejka ne
rabotaet job tvoju matj
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 31.2.2; Ssukin syn ContPh is 1b; Should be = 0b. chujovaja jachejka ne
rabotaet job tvoju matj
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 31.2.3; Ssukin syn ContPh is 1b; Should be = 0b. chujovaja jachejka ne
rabotaet job tvoju matj
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 31.2.0; Ssukin syn ContPh is 1b; Should be = 0b. chujovaja jachejka ne
rabotaet job tvoju matj
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 31.2.1; Ssukin syn ContPh is 1b; Should be = 0b. chujovaja jachejka ne
rabotaet job tvoju matj
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 31.2.2; Ssukin syn ContPh is 1b; Should be = 0b. chujovaja jachejka ne
rabotaet job tvoju matj
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 31.2.3; Ssukin syn ContPh is 1b; Should be = 0b. chujovaja jachejka ne
rabotaet job tvoju matj
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 31.2.0; Ssukin syn ContPh is 1b; Should be = 0b. chujovaja jachejka ne
rabotaet job tvoju matj
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 31.2.1; Ssukin syn ContPh is 1b; Should be = 0b. chujovaja jachejka ne
rabotaet job tvoju matj
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 31.2.2; Ssukin syn ContPh is 1b; Should be = 0b. chujovaja jachejka ne
rabotaet job tvoju matj
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 31.2.3; Ssukin syn ContPh is 1b; Should be = 0b. chujovaja jachejka ne
rabotaet job tvoju matj
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 31.2.0; Ssukin syn ContPh is 1b; Should be = 0b. chujovaja jachejka ne
rabotaet job tvoju matj
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 31.2.1; Ssukin syn ContPh is 1b; Should be = 0b. chujovaja jachejka ne
rabotaet job tvoju matj
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 31.2.2; Ssukin syn Coest Idata.02.
Depress q to quit; l to loop from start of test to failure; any other key to continue.
TEST 32 LOOPING; depress any key to quit.
TEST 32 COMPLETE.
LOOPING True;
Depress d to discontinue looping on next test; any other key to retain.
TEST 41 RUNNING
TEST 41 COMPLETE.
TEST 42 RUNNING
TEST 42 COMPLETE.
TEST 43 RUNNING
FAILURE: SubTest 43.1.0; Err is 1b; Should be = 0b. Buf Data parity error;
check BufParIn' gate, Buffer Parity RAM, BufIdataPar FF, and Idata.16 MUX.
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 43.2.0; Buffer Data is 4000b; Should be = 0b. Buf Data wrong; check
Buffer RAMs, BufWE' gate, and Buffer Idata register.
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 43.1.1; Err is 1b; Should be = 0b. Buf Data parity error;
check BufParIn' gate, Buffer Parity RAM, BufIdataPar FF, and Idata.16 MUX.
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 43.2.1; Buffer Data is 14421b; Should be = 10421b. Buf Data wrong;
check Buffer RAMs, BufWE' gate, and Buffer Idata register.
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 43.1.2; Err is 1b; Should be = 0b. Buf Data parity error;
check BufParIn' gate, Buffer Parity RAM, BufIdataPar FF, and Idata.16 MUX.
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 43.2.2; Buffer Data is 25042b; Should be = 21042b. Buf Data wrong;
check Buffer RAMs, BufWE' gate, and Buffer Idata register.
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 43.1.3; Err is 1b; Should be = 0b. Buf Data parity error;
check BufParIn' gate, Buffer Parity RAM, BufIdataPar FF, and Idata.16 MUX.
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 43.2.3; Buffer Datag value; check IncDevBufAdr FF, DevBufAdrReg, and BufAdrReg.
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 41.2.41; DevBufAdr is 177b; Should be = 51b. DevBufAdrReg
has wrong value; check IncDevBufAdr FF, DevBufAdrReg, and BufAdrReg.
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 41.2.42; DevBufAdr is 177b; Should be = 52b. DevBufAdrReg
has wrong value; check IncDevBufAdr FF, DevBufAdrReg, and BufAdrReg.
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 41.2.43; DevBufAdr is 177b; Should be = 53b. DevBufAdrReg
has wrong value; check IncDevBufAdr FF, DevBufAdrReg, and BufAdrReg.
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 41.2.44; DevBufAdr is 177b; Should be = 54b. DevBufAdrReg
has wrong value; check IncDevBufAdr FF, DevBufAdrReg, and BufAdrReg.
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 41.2.45; DevBufAdr is 177b; Should be = 55b. DevBufAdrReg
has wrong value; check IncDevBufAdr FF, DevBufAdrReg, and BufAdrReg.
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 41.2.46; DevBufAdr is 177b; Should be = 56b. DevBufAdrReg
has wrong value; check IncDevBufAdr FF, DevBufAdrReg, and BufAdrReg.
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 41.2.47; DevBufAdr is 177b; Should be = 57b. DevBufAdrReg
has wrong value; check IncDevBufAdr FF, DevBufAdrReg, and BufAdrReg.
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 41.2.48; DevBufAdr is 177b; Should be = 60b. DevBufAdrReg
has wrong value; check IncDevBufAdr FF, DevBufAdrReg, and BufAdrReg.
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 41.2.49; DevBufAdr is 177b; Should be = 61b. DevBufAdrReg
has wrong value; check IncDevBufAdr FF, DevBufAdrReg, and BufAdrReg.
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 41.2.50; DevBufAdr is 177b; Should be = 62b. DevBufAdrReg
has wrong value; check IncDevBufAdr FF, DevBufAdrReg, and BufAdrReg.
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 41.2.51; DevBufAdr is 177b; Should be = 63b. DevBufAdrReg
has wrong value; check IncDevBufAdr FF, DevBufAdrReg, and BufAdrReg.
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 41.2.52; DevBufAdr is 177b; Should be = 64b. DevBufAdrReg
has wrong value; check IncDevBufAdr FF, DevBufAdrReg, and BufAdrReg.
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 41.2.53; DevBufAdr is 177b; Should be = 65b. DevBufAdrReg
has wrong value; check IncDevBufAdr FF, DevBufAdrReg, and BufAdrReg.
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 41.2.54; DevBufAdr is 177b; Should be = 66b. DevBufAdrReg
has wrong value; check IncDevBufAdr FF, DevBufAdrReg, and BufAdrReg.
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 41.2.55; DevBufAdr is 177b; Should be = 67b. DevBufAdrReg
has wrong value; check IncDevBufAdr FF, DevBufAdrReg, and BufAdrReg.
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 41.2.56; DevBufAdr is 177b; Should be = 70b. DevBufAdrReg
has wrong value; check IncDevBufAdr FF, DevBufAdrReg, and BufAdrReg.
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 41.2.57; DevBufAdr is 177b; Should be = 71b. DevBufAdrReg
has wrong value; check IncDevBufAdr FF, DevBufAdrReg, and BufAdrReg.
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 41.2.58; DevBufAdr is 177b; Should be = 72b. DevBufAdrReg
has wrong value; check IncDevBufAdr FF, DevBufAdrReg, and BufAdrReg.
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 41.2.59; DevBufAdr is 177b; Should be = 73b. DevBufAdrReg
has wrong value; check IncDevBufAdr FF, DevBufAdrReg, and BufAdrReg.
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 41.2.60; DevBufAdr is 177b; Should be = 74b. DevBufAdrReg
has wrong value; check IncDevBufAdr FF, DevBufAdrReg, and BufAdrReg.
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 41.2.61; DevBufAdr is 177b; Should be = 75b. DevBufAdrReg
has wrong value; check IncDevBufAdr FF, DevBufAdrReg, and BufAdrReg.
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 41.2.62; DevBufAdr is 177b; Should be = 76b. DevBufAdrReg
has wrong value; check IncDevBufAdr FF, DevBufAdrReg, and BufAdrReg.
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 41.2.63; DevBufAdr is 177b; Should be = 77b. DevBufAdrReg
has wrong value; check IncDevBufAdr FF, DevBufAdrReg, and BufAdrReg.
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 41.2.64; DevBufAdr is 177b; Should be = 100b. DevBufAdrReg
has wrong value; check IncDevBufAdr FF, DevBufAdrReg, and BufAdrReg.
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 41.2.65; DevBufAdr is 177b; Should be = 101b. DevBufAdrReg
has wrong value; check IncDevBufAdr FF, DevBufAdrReg, and BufAdrReg.
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 41.2.66; DevBufAdr is 177b; Should be = 102b. DevBufAdrReg
has wrong value; check IncDevBufAdr FF, DevBufAdrReg, and BufAdrReg.
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 41.2.67; DevBufAdr is 177b; Should be = 103b. DevBufAdrReg
has wrong value; check IncDevBufAdr FF, DevBufAdrReg, and BufAdrReg.
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 41.2.68; DevBufAdr is 177b; Should be = 104b. DevBufAdrReg
has wrong value; check IncDevBufAdr FF, DevBufAdrReg, and BufAdrReg.
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 41.2.69; DevBufAdr is 177b; Should be = 105b. DevBufAdrReg
has wrong value; check IncDevBufAdr FF, DevBufAdrReg, and BufAdrReg.
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 41.2.70; DevBufAdr is 177b; Should be = 106b. DevBufAdrReg
has wrong value; check IncDevBufAdr FF, DevBufAdrReg, and BufAdrReg.
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 41.2.71; DevBufAdr is 177b; Should be = 107b. DevBufAdrReg
has wrong value; check IncDevBufAdr FF, DevBufAdrReg, and BufAdrReg.
Depress q to quit; l to loop from start of test to failure; any other key to continue.
FAILURE: SubTest 41.2.72; DevBufAdr is 177b; Should be = 110b. DevBufAdrReg
has wrong value; check IncDevBufAdr FF, DevBufAdrReg, and BufAdrReg.
Depress q to quit; l to loop from start of test to failure; any other key to continue.
F