17-Jul-80 20:22:53
This is the Board Test for the D(0) Cont. Store Board
Type:
C to RUN TEST CONTINUOUSLY;
H to HOLD;
Q to QUIT
Type C to CHANGE the BREAKPOINT Level, any other key keeps present level.
PRESENT LEVEL = 0
Type:
A to Run All Tests within the starting and ending test number,
T to Run Selected Test,
Set desired starting Test Number to 01 thru 14
Any keys other than 0 thru 9 cause start at Test 01
Test Number =
Type test number to be ended,
any keys other than 0 to 9 will cause test to be ended at 14
Test Number to be ended =
This selection will Run All Tests starting at test number 0, Ending at tes
t number 14
Type C for SINGLE CLOCK.
Type number of passes: 00
TRY AGAIN, PLEASE!
Type:
C to RUN TEST CONTINUOUSLY;
H to HOLD;
Q to QUIT
Type C to CHANGE the BREAKPOINT Level, any other key keeps present level.
PRESENT LEVEL = 0
Type:
A to Run All Tests within the starting and ending test number,
T to Run Selected Test,
Set desired starting Test Number to 01 thru 14
Any keys other than 0 thru 9 cause start at Test 01
Test Number =
Type test number to be ended,
any keys other than 0 to 9 will cause test to be ended at 14
Test Number to be ended =
This selection will Run All Tests starting at test number 0, Ending at tes
t number 14
Type C for SINGLE CLOCK.Any key advances the clock.
Type number of passes: 12
RunAllTests: pass 1
Maximum test number here is 14
TRY AGAIN, PLEASE!
Exection Time for this test is -21018 msec.
CSX TEST (rev. I): Pass 1, Test 1...
Exection Time for this test is 817 msec.
CSX TEST (rev. I): Pass 1, Test 2...
Test 2012: CS-A' was 5716 should be 5712 in boot loop, drive=465
Waiting... i-nitialize, s-cope loop, <sp>-return, c-lock
BREAKPOINT 0 3 0 0 On BREAKPOINT, press any key to continue
Running...
Test 2012: CS-A' was 5715 should be 5711 in boot loop, drive=466
Waiting... i-nitialize, s-cope loop, <sp>-return, c-lock
BREAKPOINT 0 3 0 0 On BREAKPOINT, press any key to continue
Running...
Test 170377..Run
ning
Test 3012: LR was=0, should be=1 instruction number = 1
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3013: LT was=0, should be=1 instruction number = 1
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3014: F2 was=0, should be=1 instruction number = 1
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3015: JC was=0, should be=4 instruction number = 1
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3016: JA was=1, should be=2 instruction number = 1
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3017: CIA' was=7777, should be=1 via CIA bus
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3017: CIA was=0, should be=1 via R bus
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3000: CS-A was=0, should be=2 instruction number = 2
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3006: RSEL/d was=63, should be=73 instruction number = 2
CS-A=0, JA=1, JC=0..Running
Test 3009: ALUF was=0, should be=2 instruction number = 2
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3010: BSEL was=0, should be=2 instruction number = 2
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3014: F2 was=0, should be=2 instruction number = 2
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3015: JC was=0, should be=4 instruction number = 2
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3016: JA was=1, should be=3 instruction number = 2
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3017: CIA' was=7777, should be=2 via CIA bus
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3017: CIA was=0, should be=2 via R bus
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3018: F1ok was=0, should be=1 instruction number = 2
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3019: F2ok was=0, should be=1 instruction number = 2
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3000: CS-A was=0, should be=3 instruction number = 3
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3002: MemInst/d was=0, should be=1 instruction number = 3
CS-A=0, JA=1, JC=0..Running
Test 3003: MemInst/d' was=1, should be=0 instruction number = 3
CS-A=0, JA=1, JC=0..Running
Test 3004: RMOD/d was=0, should be=1 instruction number = 3
CS-A=0, JA=1, JC=0..Running
Test 3005: RMOD/d' was=1, should be=0 instruction number = 3
CS-A=0, JA=1, JC=0..Running
Test 3006: RSEL/d was=63, should be=77 instruction number = 3
CS-A=0, JA=1, JC=0..Running
Test 3009: ALUF was=0, should be=3 instruction number = 3
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3010: BSEL was=0, should be=3 instruction number = 3
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3012: LR was=0, should be=1 instruction number = 3
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3013: LT was=0, should be=1 instruction number = 3
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3014: F2 was=0, should be=3 instruction number = 3
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3015: JC was=0, should be=4 instruction number = 3
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3016: JA was=1, should be=4 instruction number = 3
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3017: CIA' was=7777, should be=3 via CIA bus
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3017: CIA was=0, should be=3 via R bus
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3000: CS-A was=0, should be=4 instruction number = 4
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3006: RSEL/d was=63, should be=43 instruction number = 4
CS-A=0, JA=1, JC=0..Running
Test 3009: ALUF was=0, should be=4 instruction number = 4
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3014: F2 was=0, should be=4 instruction number = 4
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3015: JC was=0, should be=4 instruction number = 4
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3016: JA was=1, should be=5 instruction number = 4
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3017: CIA' was=7777, should be=4 via CIA bus
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3017: CIA was=0, should be=4 via R bus
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3000: CS-A was=0, should be=5 instruction number = 5
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3002: MemInst/d was=0, should be=1 instruction number = 5
CS-A=0, JA=1, JC=0..Running
Test 3003: MemInst/d' was=1, should be=0 instruction number = 5
CS-A=0, JA=1, JC=0..Running
Test 3004: RMOD/d was=0, should be=1 instruction number = 5
CS-A=0, JA=1, JC=0..Running
Test 3005: RMOD/d' was=1, should be=0 instruction number = 5
CS-A=0, JA=1, JC=0..Running
Test 3006: RSEL/d was=63, should be=47 instruction number = 5
CS-A=0, JA=1, JC=0..Running
Test 3009: ALUF was=0, should be=5 instruction number = 5
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3010: BSEL was=0, should be=1 instruction number = 5
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3012: LR was=0, should be=1 instruction number = 5
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3013: LT was=0, should be=1 instruction number = 5
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3014: F2 was=0, should be=5 instruction number = 5
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3015: JC was=0, should be=4 instruction number = 5
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3016: JA was=1, should be=6 instruction number = 5
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3017: CIA' was=7777, should be=5 via CIA bus
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3017: CIA was=0, should be=5 via R bus
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3000: CS-A was=0, should be=6 instruction number = 6
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3006: RSEL/d was=63, should be=53 instruction number = 6
CS-A=0, JA=1, JC=0..Running
Test 3009: ALUF was=0, should be=6 instruction number = 6
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3010: BSEL was=0, should be=2 instruction number = 6
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3014: F2 was=0, should be=6 instruction number = 6
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3015: JC was=0, should be=4 instruction number = 6
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3016: JA was=1, should be=7 instruction number = 6
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test 3017: CIA' was=7777, should be=6 via CIA bus
CS-A=0, JA=1, JC=0, CIA/CTsk=170000, APC/APCTsk=170000, CSData=170377..Run
ning
Test