Last edited by:
Taft on May 25, 1983 4:51 pm
MBrown on January 21, 1983 10:39 pm
Kolling on October 28, 1983 12:49 pm
Hauser, April 2, 1985 9:29:04 am PST
Carl Hauser, July 19, 1985 9:11:53 am PDT
AlpineFile:
DEFINITIONS =
BEGIN
AccessList: TYPE = AlpineEnvironment.AccessList;
AccessRights: TYPE = AlpineEnvironment.AccessRights;
Conversation: TYPE = AlpineEnvironment.Conversation;
FileID: TYPE = AlpineEnvironment.FileID;
LockOption: TYPE = AlpineEnvironment.LockOption;
OpenFileID: TYPE = AlpineEnvironment.OpenFileID;
OwnerName: TYPE = AlpineEnvironment.OwnerName;
PageCount: TYPE = AlpineEnvironment.PageCount;
PageNumber: TYPE = AlpineEnvironment.PageNumber;
RecoveryOption: TYPE = AlpineEnvironment.RecoveryOption;
ReferencePattern: TYPE = AlpineEnvironment.ReferencePattern;
String: TYPE = AlpineEnvironment.String;
TransID: TYPE = AlpineEnvironment.TransID;
UniversalFile: TYPE = AlpineEnvironment.UniversalFile;
VolOrVolGroupID: TYPE = AlpineEnvironment.VolOrVolGroupID;
VolumeID: TYPE = AlpineEnvironment.VolumeID;
Procedures that create OpenFileIDs
Open:
PROCEDURE [conversation: Conversation, transID: TransID, universalFile: UniversalFile, access: AccessRights ← readOnly, lock: LockOption ← [intendRead, wait], recoveryOption: RecoveryOption ← log, referencePattern: ReferencePattern ← random]
RETURNS [openFileID: OpenFileID, fileID: FileID];
! AccessFailed {fileRead, fileModify}, LockFailed, OperationFailed {damagedLeaderPage}, PossiblyDamaged, StaticallyInvalid, Unknown {volumeID, fileID, transID};
Opens an existing file described by volume and file for access under trans, and returns an OpenFileID that designates the open file. The returned FileID may differ from the one that was presented in the UniversalFile; the client is encouraged to retain the revised FileID for all future accesses to the file.
The client is required to be a member of the access control list implied by access (readAccess or modifyAccess); and if access=readOnly, the client is restricted to read-only operations on the OpenFileID.
The entire file is locked in lock.mode (a wait or a Lock.Failed can result). lock.ifConflict is also remembered and is used when performing certain file actions (e.g., Delete) which do not take a LockMode as an argument.
Create:
PROCEDURE [conversation: Conversation, transID: TransID, volumeID: VolOrVolGroupID, owner: OwnerName, initialSize: PageCount, recoveryOption: RecoveryOption ← log, referencePattern: ReferencePattern ← random]
RETURNS [openFileID: OpenFileID, universalFile: UniversalFile];
! AccessFailed {ownerCreate, spaceQuota}, OperationFailed {insufficientSpace}, StaticallyInvalid, Unknown {owner, transID, volumeID};
Creates and opens a new file under trans. volumeID may be either a specific VolumeID or a VolumeGroupID; in the latter case, the server will choose among the volumes of the group. The initial size of the file is specified by initialSize; note that this specifies the number of data pages, and does not include any file overhead (e.g., leader page). The space is charged against owner in the owner data base; the client is required to be a member of owner's create access control list, and the allocation must not exceed owner's quota.
All file properties are set to default values, which are: byteLength, highWaterMark: 0; createTime: now; readAccess: "World"; modifyAccess: "Owner" + owner's create access control list; owner: owner specified in call; stringName: empty string; version: 1.
If the call is successful, returns an OpenFileID with accessRights=readWrite and lockOption = [write, fail]. The returned UniversalFile uniquely identifies the file that was created; in particular, it contains the VolumeID for the volume in which the file was actually created, even if a VolumeGroupID was presented in the call.
Procedures that destroy OpenFileIDs
Note: for all remaining operations, Unknown[openFileID] may be raised if:
1. The OpenFileID is no longer known to Alpine because it has been closed (either explicitly or as a result of committing or aborting the transaction).
2. The file it refers to has been deleted by this transaction, perhaps using a different OpenFileID.
Close:
PROCEDURE [conversation: Conversation, openFileID: OpenFileID];
! Unknown {openFileID, transID};
Breaks the association between openFileID and its file. The number of simultaneous open files permitted on one FileStore is large but not unlimited; clients are encouraged to close files that are no longer needed, particularly when referencing many files under one transaction. Note that closing a file does not terminate the enclosing transaction and does not release any locks on the file; nor does it restrict the client's ability to later re-open the file under the same transaction.
Delete:
PROCEDURE [conversation: Conversation, openFileID: OpenFileID];
! AccessFailed {handleReadWrite}, LockFailed, Unknown {openFileID, transID};
First locks the entire file in update mode; then deletes the file. The file must have been opened with access=readWrite. The OpenFileID is made invalid by this procedure. Note that, like all destructive update actions, the deletion does not occur until the transaction is committed; however, subsequent attempts to access the file under this transaction will fail with Unknown[openFileID]. The owner's allocation is not credited with the deleted pages until commit time.
Procedures that access open file state
GetUniversalFile:
PROCEDURE [conversation: Conversation, openFileID: OpenFileID]
RETURNS [universalFile: UniversalFile];
! Unknown {openFileID, transID};
GetTransID:
PROCEDURE [conversation: Conversation, openFileID: OpenFileID]
RETURNS [transID: TransID];
! Unknown {openFileID, transID};
GetAccessRights:
PROCEDURE [conversation: Conversation, openFileID: OpenFileID]
RETURNS [access: AccessRights];
! Unknown {openFileID, transID};
GetLockOption:
PROCEDURE [conversation: Conversation, openFileID: OpenFileID]
RETURNS [lock: LockOption];
! Unknown {openFileID, transID};
This may return a lock mode stronger than the one with which the file was originally opened if operations have been performed that upgrade the lock. Such operations may have been performed on either this OpenFileID or some other OpenFileID referring to the same file under the same transaction.
SetLockOption:
PROCEDURE [conversation: Conversation, openFileID: OpenFileID, lock: LockOption];
! LockFailed, StaticallyInvalid, Unknown {openFileID, transID};
This actually changes the file lock, so it may wait or fail according to lock.ifConflict. File locks may only be upgraded by this means; attempts to downgrade a lock are ignored.
GetRecoveryOption:
PROCEDURE [conversation: Conversation, openFileID: OpenFileID]
RETURNS [recoveryOption: RecoveryOption];
! Unknown {openFileID, transID};
GetReferencePattern:
PROCEDURE [conversation: Conversation, openFileID: OpenFileID]
RETURNS [referencePattern: ReferencePattern];
! Unknown {openFileID, transID};
SetReferencePattern:
PROCEDURE [conversation: Conversation, openFileID: OpenFileID, referencePattern: ReferencePattern];
! StaticallyInvalid, Unknown {openFileID, transID};
Procedures that access pages of the file
Note: for operations that reference the contents of a file (data or properties), it is possible that several clients may be accessing the file concurrently under the same transaction (using the same or different OpenFileIDs). Alpine makes no attempt to prevent or adjudicate conflicting access to the same data in this situation, except to assure that reads and writes of single individual file pages and properties are atomic with respect to each other.
PageRun: TYPE = AlpineEnvironment.PageRun;
PageBuffer: TYPE = LONG DESCRIPTOR FOR ARRAY OF WORD;
VALUEPageBuffer: TYPE = PageBuffer;
RESULTPageBuffer: TYPE = PageBuffer;
maxPagesPerRun: CARDINAL = LAST[CARDINAL]/AlpineEnvironment.wordsPerPage; -- This is all that can be described with a DESCRIPTOR (PageBuffer). The restriction applies only to ReadPages and WritePages.
ReadPages:
PROCEDURE [conversation: Conversation, openFileID: OpenFileID, pageRun: PageRun, pageBuffer: RESULTPageBuffer, lock: LockOption ← [read, wait]];
! OperationFailed {inconsistentDescriptor, nonexistentFilePage}, LockFailed, StaticallyInvalid, Unknown {openFileID, transID};
Reads data from the pages described by pageRun of the file associated with openFileID, and puts it contiguously into client memory in the block described by pageBuffer (whose length must be consistent with pageRun.count or else OperationFailed[inconsistentDescriptor] is raised). If the entire file is not already locked in at least the mode specified by lock, sets locks in that mode on the individual pages, and upgrades the file lock to the corresponding intention mode if necessary.
WritePages:
PROCEDURE [conversation: Conversation, openFileID: OpenFileID, pageRun: PageRun, pageBuffer: VALUEPageBuffer, lock: LockOption ← [write, wait]];
! AccessFailed {handleReadWrite}, LockFailed, OperationFailed {nonexistentFilePage}, StaticallyInvalid, Unknown {openFileID, transID};
Writes data from client memory in the block described by pageBuffer to the pages described by pageRun of the file associated with openFileID. If the entire file is not already locked in at least the mode specified by lock, sets locks in that mode on the individual pages, and upgrades the file lock to the corresponding intention mode if necessary. The file must have been opened with access=readWrite.
LockPages:
PROCEDURE [conversation: Conversation, openFileID: OpenFileID, pageRun: PageRun, lock: LockOption ← [read, wait]];
! LockFailed, StaticallyInvalid, Unknown {openFileID, transID};
Explicitly sets locks on the specified pages of the file.
UnlockPages:
PROCEDURE [conversation: Conversation, openFileID: OpenFileID, pageRun: PageRun];
! StaticallyInvalid, Unknown {openFileID, transID};
If the specified pages of the file are locked in a mode no stronger than read, then removes those locks. It is the client's responsibility to assure consistency of any subsequent operations whose behavior depends on the data that was read under those locks. Note that locks are reference-counted and are not removed until one UnlockPages has been done for each LockPages or ReadPages previously performed on the same pages. Attempts to remove nonexistent locks or locks stronger than read are ignored without error indication. File intention locks that were set while acquiring the page locks are not released.
Procedures that access properties of the file
Property: TYPE = AlpineEnvironment.Property;
PropertyValuePair: TYPE = AlpineEnvironment.PropertyValuePair;
PropertySet: TYPE = PACKED ARRAY Property OF FalseBool;
FalseBool: TYPE = BOOLEAN ← FALSE;
allProperties: PropertySet = ALL [TRUE];
ByteCount: TYPE = AlpineEnvironment.ByteCount;
FileVersion: TYPE = AlpineEnvironment.FileVersion;
ReadProperties:
PROCEDURE [conversation: Conversation, openFileID: OpenFileID, desiredProperties: PropertySet ← allProperties, lock: LockOption ← [read, wait]]
RETURNS [properties:
LIST
OF PropertyValuePair];
! LockFailed, StaticallyInvalid, Unknown {openFileID, transID};
Reads the properties specified by desiredProperties, ordered as in the declaration of Property. Locks those properties as specified by lock. Currently, all properties with the exception of version are treated together with respect to locking; the version has a separate lock. Note that reading the version will prevent any other transaction that updates the file from committing, unless the version lock is later removed (by UnlockVersion).
WriteProperties:
PROCEDURE [conversation: Conversation, openFileID: OpenFileID, properties:
LIST
OF PropertyValuePair, lock: LockOption ← [write, wait]];
! AccessFailed {handleReadWrite, ownerCreate, spaceQuota}, LockFailed, OperationFailed {insufficientSpace, unwritableProperty}, StaticallyInvalid, Unknown {openFileID, owner, transID};
Writes the supplied properties, after first locking them in the specified mode. The version property may not be written by this means.
To write the byteLength, createTime, highWaterMark, and stringName properties requires that the OpenFileID be open with access=readWrite. To write readAccess or modifyAccess requires that the client be the file's owner or a member of the create access control list for the file's owner, but does NOT require that the file be open with access=readWrite. To write owner requires that both the above conditions be satisfied, and additionally requires that the client be a member of the create access control list for the new owner; the disk space occupied by the file is credited to the old owner and charged to the new one.
If there is insufficient space in the leader page to represent the new properties, OperationFailed[insufficientSpace] is raised. Note that if multiple properties are written by one call and an error occurs, some of the properties may nevertheless have been written successfully.
UnlockVersion:
PROCEDURE [conversation: Conversation, openFileID: OpenFileID];
! Unknown {openFileID, transID};
Unlocks a read lock previously set on the version property. All comments on UnlockPages apply here also.
IncrementVersion:
PROCEDURE [conversation: Conversation, openFileID: OpenFileID, increment:
LONG
INTEGER];
! AccessFailed {handleReadWrite}, StaticallyInvalid, Unknown {openFileID, transID};
Arranges that at transaction commit time, increment will be added to the version property, instead of 1 or 0 (depending on whether or not the transaction has performed any updates to the file). Note that the change in version number is not visible, even to the transaction that incremented it, until commit time.
GetSize:
PROCEDURE [conversation: Conversation, openFileID: OpenFileID, lock: LockOption ← [read, wait]]
RETURNS [size: PageCount];
! LockFailed, Unknown {openFileID, transID};
Returns the file's size, after setting a lock on the size property. Note that the returned value is the number of data pages, and does not include any file overhead (e.g., leader page).
SetSize:
PROCEDURE [conversation: Conversation, openFileID: OpenFileID, size: PageCount, lock: LockOption ← [write, wait]];
! AccessFailed {handleReadWrite, spaceQuota}, LockFailed, OperationFailed {insufficientSpace}, StaticallyInvalid, Unknown {openFileID, transID};
Changes the file's size to the new size specified, after setting an update or write lock on it. Additionally, decreasing the file's size locks the entire file in the same mode. Note that the size is the number of data pages, and does not include any file overhead (e.g., leader page).
If the new size is less than the file's high water mark, sets the high water mark equal to size. Requires that the OpenFileID be open with access=readWrite.
Appropriately adjusts the disk space charged to the file's owner; however, it is not required that the client be a member of the owner's create access control list. Note that allocation is consumed immediately when a file's size is increased; but when the size is decreased, the allocation is not credited with the freed pages until transaction commit time.