[Cyan]<Cedar6.1>Imager>PrePressFontFormat.mesa!1

PrePressFontFormat.mesa

Doug Wyatt, March 7, 1985 2:32:05 pm PST

DIRECTORY

Basics USING [BYTE, CARD, SwapHalves],

RealConvert USING [BcplReal];

PrePressFontFormat: CEDAR DEFINITIONS

IMPORTS Basics

~ BEGIN

BYTE: TYPE ~ Basics.BYTE;

CARD: TYPE ~ Basics.CARD;

BcplCard: TYPE ~ MACHINE DEPENDENT RECORD[highbits: CARDINAL, lowbits: CARDINAL];

A BCPL doubleword (unsigned); order of the halves is the reverse of the Mesa convention.

BcplInt: TYPE ~ MACHINE DEPENDENT RECORD[highbits: INTEGER, lowbits: CARDINAL];

A BCPL doubleword (signed); order of the halves is the reverse of the Mesa convention.

CardFromBcpl: PROC[x: BcplCard] RETURNS[CARD]

~ TRUSTED INLINE { RETURN[Basics.SwapHalves[LOOPHOLE[x]].lc] };

BcplFromCard: PROC[x: CARD] RETURNS[BcplCard]

~ TRUSTED INLINE { RETURN[LOOPHOLE[Basics.SwapHalves[[lc[x]]]]] };

IntFromBcpl: PROC[x: BcplInt] RETURNS[INT]

~ TRUSTED INLINE { RETURN[Basics.SwapHalves[LOOPHOLE[x]].li] };

BcplFromInt: PROC[x: INT] RETURNS[BcplInt]

~ TRUSTED INLINE { RETURN[LOOPHOLE[Basics.SwapHalves[[li[x]]]]] };

BcplReal: TYPE ~ RealConvert.BcplReal;

A BCPL floating point number; use RealConvert to convert to Mesa REAL.

IXType: TYPE ~ MACHINE DEPENDENT {

end(0), -- end of index part

name(1), -- NameIndexEntry follows

spline(2), -- StdIndexEntry follows

character(3), -- CharacterIndexEntry follows

width(4), -- StdIndexEntry follows

orbit(5), -- CharacterIndexEntry follows

multipleCharacter(6), -- MultipleCharacterIndexEntry follows

(17B)

};

IXHeader: TYPE ~ MACHINE DEPENDENT RECORD[

type(0:0..3): IXType, -- type of entry

length(0:4..15): [0..7777B] -- length of entry, including this header

];

NameIndexEntry: TYPE ~ MACHINE DEPENDENT RECORD[ -- ix.type = name

code(0:0..15): CARDINAL, -- numeric code for this name

chars(1): PACKED ARRAY[0..20) OF BYTE -- name as a BCPL string: first byte is length

];

StdIndexEntry: TYPE ~ MACHINE DEPENDENT RECORD[ -- ix.type = spline, width

family(0:0..7): BYTE, -- family name, using a name code

face(0:8..15): BYTE, -- face encoding

bc(1:0..7): BYTE, -- beginning character

ec(1:8..15): BYTE, -- ending character

size(2:0..15): CARDINAL, -- size in micas

rotation(3:0..15): CARDINAL, -- rotation in minutes of arc anticlockwise

segmentSA(4:0..31): BcplCard, -- starting address in file of the segment (in words!)

segmentLength(6:0..31): BcplCard -- length of the segment (in words!)

];

CharacterIndexEntry: TYPE ~ MACHINE DEPENDENT RECORD[ -- ix.type = character, orbit

family(0:0..7): BYTE, -- family name, using a name code

face(0:8..15): BYTE, -- face encoding

bc(1:0..7): BYTE, -- beginning character

ec(1:8..15): BYTE, -- ending character

size(2:0..15): CARDINAL, -- size in micas

rotation(3:0..15): CARDINAL, -- rotation in minutes of arc anticlockwise

segmentSA(4:0..31): BcplCard, -- starting address in file of the segment (in words!)

segmentLength(6:0..31): BcplCard, -- length of the segment (in words!)

resolutionX(8:0..15): CARDINAL, -- 10 * resolution in scan lines per inch

resolutionY(9:0..15): CARDINAL -- 10 * resolution in bits per inch

];

MultipleCharacterIndexEntry: TYPE ~ MACHINE DEPENDENT RECORD[ -- ix.type=multipleCharacter

family(0:0..7): BYTE, -- family name, using a name code

face(0:8..15): BYTE, -- face encoding

bc(1:0..7): BYTE, -- beginning character

ec(1:8..15): BYTE, -- ending character

size(2:0..15): CARDINAL, -- size in micas

rotation(3:0..15): CARDINAL, -- rotation in minutes of arc anticlockwise

resolutionX(4:0..15): CARDINAL, -- 10 * resolution in scan lines per inch

resolutionY(5:0..15): CARDINAL, -- 10 * resolution in bits per inch

numSegs(6:0..15): CARDINAL -- number of segments

-- segs: ARRAY[0..numSegs) OF DatedSegmentEntry

];

DatedSegmentEntry: TYPE ~ MACHINE DEPENDENT RECORD[

segmentSA(0:0..31): BcplCard,

segmentLength(2:0..31): BcplCard,

expirationDate(4:0..31): BcplCard

];

CharacterSegment: TYPE ~ RECORD[

charData: CharacterDataArray[ec-bc+1],

directory: DirectoryArray[ec-bc+1]

-- followed by rasters, pointed to by the directory

];

CharacterData: TYPE ~ MACHINE DEPENDENT RECORD[

wx(0:0..31): BcplInt, -- x width (signed fraction)

wy(2:0..31): BcplInt, -- y width (signed fraction)

bbox(4:0..15): INTEGER, -- x offset for bounding box

bboy(5:0..15): INTEGER, -- y offset for bounding box

bbdx(6:0..15): INTEGER, -- width of bounding box (scan lines)

bbdy(7:0..15): INTEGER -- height of bounding box (bits) or missingCharacter

];

missingCharacter: INTEGER ~ -1;

value of bbdx in CharacterData for a missing character

CharDataArray: TYPE ~ RECORD[SEQUENCE COMPUTED CARDINAL OF CharacterData];

RelFilePos: TYPE ~ BcplInt;

missingFilePos: RelFilePos ~ LOOPHOLE[INT.LAST];

DirectoryArray: TYPE ~ RECORD[SEQUENCE COMPUTED CARDINAL OF RelFilePos];

RasterDefn: TYPE ~ MACHINE DEPENDENT RECORD[

raster(0:0..5): [0..77B], -- words per scan line

lines(0:6..15): [0..1777B] -- number of scan lines

-- bits: ARRAY[0..lines) OF ARRAY[0..raster) OF WORD

];

WidthSegment: TYPE ~ MACHINE DEPENDENT RECORD[

fbbox(0:0..15): INTEGER, -- x offset for font bounding box

fbboy(1:0..15): INTEGER, -- y offset for font bounding box

fbbdx(2:0..15): INTEGER, -- x width for font bounding box

fbbdy(3:0..15): INTEGER, -- y height for font bounding box

xWidthFixed(4:0..0): [0..1], -- 1 if all x widths equal

yWidthFixed(4:1..1): [0..1], -- 1 if all y widths equal

spare(4:2..15): [0..37777B] -- unused

-- xwidths: WidthArray[IF xWidthFixed THEN 1 ELSE ec-bc+1]

-- ywidths: WidthArray[IF yWidthFixed THEN 1 ELSE ec-bc+1]

];

WidthArray: TYPE ~ RECORD[SEQUENCE COMPUTED CARDINAL OF INTEGER];

missingWidth: INTEGER ~ LOOPHOLE[100000B];

value of WidthArray entry for a missing character

SplineSegment: TYPE ~ RECORD[

splineData: SplineDataArray[ec-bc+1],

directory: DirectoryArray[ec-bc+1]

-- followed by spline codes, pointed to by the directory

];

SplineData: TYPE ~ MACHINE DEPENDENT RECORD[

wx(0:0..31): BcplReal, -- width in x direction or missingSpline

wy(2:0..31): BcplReal, -- width in y direction

xmin(4:0..31): BcplReal, -- left edge of bounding box

ymin(6:0..31): BcplReal, -- bottom edge of bounding box

xmax(8:0..31): BcplReal, -- right edge of bounding box

ymax(10:0..31): BcplReal -- top edge of bounding box

];

missingSpline: BcplReal ~ LOOPHOLE[BcplCard[0, CARDINAL.LAST]];

value of wx in SplineData for a missing character

SplineDataArray: TYPE ~ RECORD[SEQUENCE COMPUTED CARDINAL OF SplineData];

SplineCode: TYPE ~ MACHINE DEPENDENT {

moveTo(1), drawTo(2), drawCurve(3),

endDefinition(177776B), newObject(177777B)

};

SplineCommand: TYPE ~ MACHINE DEPENDENT RECORD[code: SplineCode];

SplineCoords: TYPE ~ MACHINE DEPENDENT RECORD[

x(0:0..31): BcplReal,

y(2:0..31): BcplReal

];

END.