FileStreamMoreImpl.mesa
Copyright © 1985 by Xerox Corporation. All rights reserved.
Hagmann on December 6, 1983 4:50 pm
Russ Atkinson (RRA) February 4, 1985 3:27:09 pm PST
Bob Hagmann June 10, 1986 8:23:39 am PDT
Please maintain change log at end of file.
This compilation is logically part of FileStreamImpl, but must be seperate since it uses a module monitor (FileStreamImpl uses object monitors) and we export to FS here (there is a type conflict on Close).
DIRECTORY
BasicTime USING [GMT],
FileStream USING [ErrorFromStream, OpenFileFromStream, StreamFromOpenFile, StreamFromOpenStream],
FileStreamPrivate USING [ BufferNodeHandle, BufferNode, FileDataHandle, FileData, NodeStatus, ProcessNode ],
FS USING [AccessOptions, ByteCount, Close, Create, Error, ErrorDesc, ExtendFileProc, InitialPosition, Lock, Open, OpenFile, OpenOrCreate, PagesForBytes, StreamBufferParms, StreamOptions],
IO USING [STREAM],
Process USING [Detach, Priority, priorityForeground, SetPriority],
Rope USING [ROPE];
FileStreamMoreImpl:
CEDAR
MONITOR
IMPORTS FileStream, FileStreamPrivate, FS, Process
EXPORTS FileStreamPrivate, FS = BEGIN
OPEN Rope, IO;
FileData: TYPE = FileStreamPrivate.FileData;
BufferNode: TYPE = FileStreamPrivate.BufferNode;
FileDataHandle: TYPE = FileStreamPrivate.FileDataHandle;
BufferNodeHandle: TYPE = FileStreamPrivate.BufferNodeHandle;
NumberOfProcesses: NAT = 2 ;
ModuleCondition: CONDITION;
QueueRecord:
TYPE =
RECORD [
fileData: FileDataHandle,
node: BufferNodeHandle
,nodeStatus: FileStreamPrivate.NodeStatus
,nodeFirstFileByteInBuffer: INT
];
QUEUESIZE: INT = 20 ;
QueueRec:
TYPE =
RECORD [
queue: ARRAY [0..QUEUESIZE) OF QueueRecord,
putQueue: INT ← 0,
getQueue: INT ← 0,
noEntries: INT ← 0
];
Queue: REF QueueRec ← NIL;
StartRequest:
PUBLIC
ENTRY
PROC [ fileData: FileDataHandle, node: BufferNodeHandle ] = {
Queue up a request. Normal case is to queue and BROADCAST without waiting. If the queue is full, then wait for an entry to free up and then queue request. Except when the queue is full (and thus we are really behind), this returns immediately.
tempCount: INT ← Queue.noEntries ;
ptr: INT ← Queue.getQueue ;
IF node.status # needsParallelRead AND node.status # needsParallelWrite THEN ERROR ;
WHILE tempCount > 0
DO
IF Queue.queue[ptr].node = node THEN ERROR ;
ptr ← IF ptr = QUEUESIZE-1 THEN 0 ELSE ptr+1 ;
tempCount ← tempCount - 1 ;
ENDLOOP;
WHILE Queue.noEntries >=
QUEUESIZE - 1
DO
WAIT ModuleCondition ;
ENDLOOP;
Queue.queue[Queue.putQueue] ← [fileData, node --, node.status, node.firstFileByteInBuffer--];
Queue.putQueue ← IF Queue.putQueue = QUEUESIZE-1 THEN 0 ELSE Queue.putQueue+1 ;
Queue.noEntries ← Queue.noEntries + 1;
BROADCAST ModuleCondition ;
};
FindSomethingToDo:
ENTRY
PROC []
RETURNS [fileData: FileDataHandle, node: BufferNodeHandle ] = {
This procedure is where the processes all wait for something to do.
WHILE Queue.noEntries = 0
DO
WAIT ModuleCondition ;
ENDLOOP;
[fileData, node ] ← Queue.queue[Queue.getQueue] ;
Queue.queue[Queue.getQueue] ← [NIL,NIL];
Queue.getQueue ← IF Queue.getQueue = QUEUESIZE-1 THEN 0 ELSE Queue.getQueue+1 ;
Queue.noEntries ← Queue.noEntries - 1;
BROADCAST ModuleCondition ;
};
FileStreamForegroundProcess:
PROC [] = {
This procedure is the top of the processes that do all the parallel reads and writes.
Process.SetPriority[Process.priorityForeground];
DO
fileData: FileDataHandle ;
node: BufferNodeHandle;
[fileData, node] ← FindSomethingToDo [];
FileStreamPrivate.ProcessNode[fileData, node] ;
ENDLOOP;
};
Implementation of the "workstation FS" subclass of FileStream. This is mostly a veneer over the generic FileStream; only stream creation is special.
StreamOpen:
PUBLIC
PROC [fileName:
ROPE, accessOptions:
FS.AccessOptions,
streamOptions:
FS.StreamOptions, keep:
CARDINAL, createByteCount:
FS.ByteCount,
streamBufferParms:
FS.StreamBufferParms, extendFileProc:
FS.ExtendFileProc,
wantedCreatedTime: BasicTime.
GMT, remoteCheck:
BOOL, wDir:
ROPE]
RETURNS [
STREAM] = {
fileHandle:
FS.OpenFile =
SELECT accessOptions
FROM
$read => FS.Open[name: fileName, wantedCreatedTime: wantedCreatedTime, remoteCheck: remoteCheck, wDir: wDir],
$create => FS.Create[name: fileName, keep: keep, pages: FS.PagesForBytes[createByteCount], wDir: wDir],
$append => FS.OpenOrCreate[name: fileName, keep: keep, pages: FS.PagesForBytes[createByteCount], wDir: wDir],
$write => FS.Open[name: fileName, lock: $write, wantedCreatedTime: wantedCreatedTime, remoteCheck: remoteCheck, wDir: wDir],
ENDCASE => ERROR;
RETURN[FileStream.StreamFromOpenFile[openFile: fileHandle, accessRights:
IF accessOptions = $read
THEN $read
ELSE $write, initialPosition:
IF accessOptions = $append
THEN $end
ELSE $start, streamOptions: streamOptions, streamBufferParms: streamBufferParms, extendFileProc: extendFileProc
! FS.Error => FS.Close[file: fileHandle]]];
};
The following procedures simply re-export the ones from FileStream. However, directly exporting the procedure values imported from FileStream does not work for some reason.
StreamFromOpenFile:
PUBLIC
PROC [openFile:
FS.OpenFile, accessRights:
FS.Lock, initialPosition:
FS.InitialPosition, streamOptions:
FS.StreamOptions, streamBufferParms:
FS.StreamBufferParms, extendFileProc:
FS.ExtendFileProc]
RETURNS [
STREAM] = {
RETURN [FileStream.StreamFromOpenFile[openFile: openFile, accessRights: accessRights, initialPosition: initialPosition, streamOptions: streamOptions, streamBufferParms: streamBufferParms, extendFileProc: extendFileProc]];
};
StreamFromOpenStream:
PUBLIC
PROC [self:
STREAM]
RETURNS [
STREAM] = {
RETURN [FileStream.StreamFromOpenStream[self]];
};
OpenFileFromStream:
PUBLIC
PROC [self:
STREAM]
RETURNS [
FS.OpenFile] = {
RETURN [FileStream.OpenFileFromStream[self]];
};
ErrorFromStream:
PUBLIC
PROC [self:
STREAM]
RETURNS [
FS.ErrorDesc] = {
RETURN [FileStream.ErrorFromStream[self]];
};
Initialization
Init:
PROC [] = {
Queue ← NEW[QueueRec];
THROUGH [1..NumberOfProcesses]
DO
TRUSTED {Process.Detach[FORK FileStreamForegroundProcess[]]; };
ENDLOOP;
};
Init[];
END.
CHANGE LOG
Created by Hagmann on December 6, 1983 3:02 pm
From a suggestion by Mark Brown, implement a cache of processes on a package wide basis.
Modified by Hagmann on December 19, 1984 9:49:48 am PST
Reformatted, and changed the queue be a collectable object to reduce MDS and GFI use.
Bob Hagmann June 10, 1986 8:22:35 am PDT
merged FSStreamImpl and FileStreamProcessCacheImpl to form this program