DIRECTORY

Breakpoint,
BreakpointPrivate,
BreakWorldArchitecture,
Rope USING [ROPE],
RS6000Architecture,
RS6000Breakpoint,
RS6000BreakWorldUtilities,
RS6000Manger,
Shepherd,
TargetArchitecture;


RS6000BreakpointImpl: CEDAR PROGRAM 
IMPORTS 
Breakpoint, BreakpointPrivate, BreakWorldArchitecture, RS6000Architecture, RS6000BreakWorldUtilities, RS6000Manger, Shepherd, TargetArchitecture

~ {
SetBreakpoint: BreakpointPrivate.SetBreakProcType ~ {
break: Breakpoint.Break _ Breakpoint.nullBreak;
patch: Shepherd.Patch _ Shepherd.nullPatch;
errorCode: Breakpoint.ErrorCode _ Breakpoint.nullErrorCode;
errorMessage: Breakpoint.ErrorMessage _ Breakpoint.nullErrorMessage;

IF address.IsNullAddress[] THEN {
ERROR Breakpoint.CantSet[
code: $NotAtNullAddress, message: "Cannot set breakpoint at null address"];
};
IF breakProc.IsNullAddress[] THEN {
ERROR Breakpoint.CantSet[
code: $NotWithNullAddress, 
message: "Cannot set breakpoint with null break procedure world address"];
};
{
breakProcTargetAddress: TargetArchitecture.Address ~ 
breakProc.TargetAddressFromBreakWorldAddress[];

IF breakProcTargetAddress.IsNullAddress[] THEN {
ERROR Breakpoint.CantSet[
code: $NotWithNullAddress, 
message: "Cannot set breakpoint with null break procedure target address"];
};
};
{	-- extra scope to contain EXITS
patch _ Shepherd.ReservePatch[
pc: address, codeSize: BYTES[RS6000Breakpoint.PatchStruct]
! Shepherd.NoMeadow => {
errorCode _ $NoMeadow;
errorMessage _ message;
GO TO Cannot;
};
  Shepherd.BusyMeadow => {
errorCode _ $BusyMeadow;
errorMessage _ message;
GO TO Cannot;
};
  Shepherd.BusyPC => {
errorCode _ $BusyPC;
errorMessage _ message;
GO TO Cannot;
};
  Shepherd.NoRoom => {
errorCode _ $NoRoom;
errorMessage _ message;
GO TO Cannot;
};
  Shepherd.CantReach => {
errorCode _ $CantReach;
errorMessage _ message;
GO TO Cannot;
};
];
Install[
address: address,
patch: patch,
breakProc: breakProc,
breakProcTOC: breakProcDataSegment,
breakData: breakData,
damages: damages];
break _ Breakpoint.NewBreak[address: address, patch: patch, clientData: clientData];
Breakpoint.RememberBreak[break
! Breakpoint.Cant => {
errorCode _ $CantRemember;
errorMessage _ message;
GO TO Cannot;
};];
EXITS
Cannot => {
ERROR Breakpoint.CantSet[code: errorCode, message: errorMessage];
};
};
RETURN [break];
};

Install: PROCEDURE [
address: BreakWorldArchitecture.Address, 
patch: Shepherd.Patch,
breakProc: Breakpoint.BreakProc,
breakProcTOC: BreakWorldArchitecture.Address, 
breakData: Breakpoint.BreakData, 
damages: TargetArchitecture.RegisterClass] 
RETURNS [] ~ {
IF address.IsNullAddress[] THEN {
ERROR Breakpoint.CantSet[code: $NullAddress, message: "Install[nullAddress]"];
};
IF patch.IsNullPatch[] THEN {
ERROR Breakpoint.CantSet[code: $NullPatch, message: "Install[nullPatch]"];
};
IF breakProc.IsNullAddress[] THEN {
ERROR Breakpoint.CantSet[code: $NullAddress, message: "Install[nullBreakProc]"];
};
InstallClosureCaller[
address: address, 
patch: patch, 
breakProc: breakProc,
breakProcTOC: breakProcTOC,
breakData: breakData, 
damages: damages];
InstallManger[address: address, patch: patch];
};

InstallClosureCaller: PROCEDURE [
address: BreakWorldArchitecture.Address,
patch: Shepherd.Patch,
breakProc: Breakpoint.BreakProc,
breakProcTOC: BreakWorldArchitecture.Address,
breakData: Breakpoint.BreakData,
damages: TargetArchitecture.RegisterClass]
RETURNS [] ~ {
IF address.IsNullAddress[] THEN {
ERROR Breakpoint.CantSet[
code: $NullAddress, message: "InstallClosureCaller[nullAddress]"];
};
IF breakProc.IsNullAddress[] THEN {
ERROR Breakpoint.CantSet[
code: $NullAddress, message: "InstallClosureCaller[nullBreakProc]"];
};
IF patch.IsNullPatch[] THEN {
ERROR Breakpoint.CantSet[
code: $NullPatch, message: "InstallClosureCaller[nullPatch]"];
};
{
instructionAddress: RS6000Architecture.RS6000Address ~
RS6000BreakWorldUtilities.RS6000AddressFromBreakWorldAddress[address: address];
instructionAddressCard: CARD32 ~ LOOPHOLE[instructionAddress];
tocAddress: RS6000Architecture.RS6000Address ~
RS6000BreakWorldUtilities.RS6000AddressFromBreakWorldAddress[address: breakProcTOC];
tocAddressCard: CARD32 ~ LOOPHOLE[tocAddress];
patchAddress: BreakWorldArchitecture.Address ~ Shepherd.CodeAddressFromPatch[patch: patch];
patchRS6000Address: RS6000Architecture.RS6000Address ~ 
RS6000BreakWorldUtilities.RS6000AddressFromBreakWorldAddress[address: patchAddress];
frameSize: INT ~ 
RS6000Architecture.stackPointerOffset 
+ RS6000Architecture.stackAllocationForArgument 
+ RS6000Architecture.stackAllocationForLinkArea
+ RS6000Breakpoint.registerSaveArea;
gprSaveArea: INT ~ 
RS6000Architecture.stackAllocationForArgument
+ RS6000Architecture.stackAllocationForLinkArea
+ RS6000Breakpoint.registerSaveArea;
damagesRegisters: RS6000Architecture.RegisterClass ~ 
RS6000Architecture.RS6000RegisterClassFromTargetRegisterClass[registerClass: damages];
registerSaveName: Rope.ROPE ~ SELECT damagesRegisters FROM
none =>	".save_regs_none",
globals =>	".save_regs_globals",
globalsAndIns => ".save_regs_mini",
ENDCASE =>	".save_regs";
registerRestoreName: Rope.ROPE ~ SELECT damagesRegisters FROM
none =>	".restore_regs_none",
globals =>	".restore_regs_globals",
globalsAndIns => ".restore_regs_mini",
ENDCASE =>	".restore_regs";

closureCaller: RS6000Breakpoint.ClosureCaller;

errorCode: Breakpoint.ErrorCode _ Breakpoint.nullErrorCode;
errorMessage: Breakpoint.ErrorMessage _ Breakpoint.nullErrorMessage;
{
{ENABLE {
RS6000Architecture.CantRelocate => {
errorCode _ $CantSet;
errorMessage _ "Cannot relocate instruction (RS6000BreakpointImpl).";
GO TO Cannot;
};
RS6000Architecture.CantReach => {
errorCode _ $CantSet;
errorMessage _ "pc-relative branch is out of range (RS6000BreakpointImpl).";
GO TO Cannot;
};
RS6000Architecture.NullRS6000Address => {
errorCode _ $CantSet;
errorMessage _ "A null address was supplied to breakpoint code generation (RS6000BreakpointImpl).";
GO TO Cannot;
};
RS6000Architecture.NullRS6000Instruction => {
errorCode _ $CantSet;
errorMessage _ "A null instruction was encountered in breakpoint code generation (RS6000BreakpointImpl).";
GO TO Cannot;
};
};

{
closureCaller.stu _ RS6000Architecture.Stu[rs: gpr1, offset: -frameSize, ra: gpr1];
BreakWorldArchitecture.PokeInstruction[
pc: patchAddress, 
displacement: StuOffset[], 
instruction: RS6000Architecture.TargetInstructionFromRS6000Instruction[
instruction: closureCaller.stu]];
};
{
closureCaller.stm _ RS6000Architecture.Stm[rs: gpr0, offset: gprSaveArea, ra: gpr1];
BreakWorldArchitecture.PokeInstruction[
pc: patchAddress, 
displacement: StmOffset[], 
instruction: RS6000Architecture.TargetInstructionFromRS6000Instruction[
instruction: closureCaller.stm]];
};
{
closureCaller.mfspr _ RS6000Architecture.Mfspr[rt: gpr0, spr: lr, rc: FALSE];
BreakWorldArchitecture.PokeInstruction[
pc: patchAddress, 
displacement: MfsprOffset[], 
instruction: RS6000Architecture.TargetInstructionFromRS6000Instruction[
instruction: closureCaller.mfspr]];
};

{
closureCaller.st _ RS6000Architecture.St[rs: gpr0, offset: frameSize-4, ra: gpr1];
BreakWorldArchitecture.PokeInstruction[
pc: patchAddress, displacement: StOffset[], 
instruction: RS6000Architecture.TargetInstructionFromRS6000Instruction[
instruction: closureCaller.st]];
};
{
closureCaller.liu0 _ RS6000Architecture.Liu[
rt: gpr0, upper: RS6000Architecture.High[instructionAddressCard]];
BreakWorldArchitecture.PokeInstruction[
pc: patchAddress, 
displacement: Liu0Offset[], 
instruction: RS6000Architecture.TargetInstructionFromRS6000Instruction[
instruction: closureCaller.liu0]];
};
{
closureCaller.oril0 _ RS6000Architecture.OrLConst[
ra: gpr0, rs: gpr0, ui: RS6000Architecture.Low[instructionAddressCard]];
BreakWorldArchitecture.PokeInstruction[
pc: patchAddress, 
displacement: Oril0Offset[], 
instruction: RS6000Architecture.TargetInstructionFromRS6000Instruction[
instruction: closureCaller.oril0]];
};
{
closureCaller.st0 _ RS6000Architecture.St[rs: gpr0, offset: frameSize+8, ra: gpr1];
BreakWorldArchitecture.PokeInstruction[
pc: patchAddress, displacement: St0Offset[], 
instruction: RS6000Architecture.TargetInstructionFromRS6000Instruction[
instruction: closureCaller.st0]];
};
{
closureCaller.mfmq _ RS6000Architecture.Mfspr[rt: gpr31, spr: mq, rc: FALSE];
BreakWorldArchitecture.PokeInstruction[
pc: patchAddress, displacement: MfmqOffset[], 
instruction: RS6000Architecture.TargetInstructionFromRS6000Instruction[
instruction: closureCaller.mfmq]];
closureCaller.mfxer _ RS6000Architecture.Mfspr[rt: gpr30, spr: xfr, rc: FALSE];
BreakWorldArchitecture.PokeInstruction[
pc: patchAddress, displacement: MfxerOffset[], 
instruction: RS6000Architecture.TargetInstructionFromRS6000Instruction[
instruction: closureCaller.mfxer]];

closureCaller.mfctr _ RS6000Architecture.Mfspr[rt: gpr29, spr: ctr, rc: FALSE];
BreakWorldArchitecture.PokeInstruction[
pc: patchAddress, displacement: MfctrOffset[], 
instruction: RS6000Architecture.TargetInstructionFromRS6000Instruction[
instruction: closureCaller.mfctr]];

closureCaller.mfcr _ RS6000Architecture.Mfcr[rs: gpr28, rc: FALSE];
BreakWorldArchitecture.PokeInstruction[
pc: patchAddress, displacement: MfcrOffset[], 
instruction: RS6000Architecture.TargetInstructionFromRS6000Instruction[
instruction: closureCaller.mfcr]];

closureCaller.stm1 _ RS6000Architecture.Stm[rs: gpr28, offset: 248, ra: gpr1];
BreakWorldArchitecture.PokeInstruction[
pc: patchAddress, displacement: Stm1Offset[], 
instruction: RS6000Architecture.TargetInstructionFromRS6000Instruction[
instruction: closureCaller.stm1]];

};
{
closureCaller.liu _ RS6000Architecture.Liu[
rt: gpr2, upper: RS6000Architecture.High[tocAddressCard]];
BreakWorldArchitecture.PokeInstruction[
pc: patchAddress, 
displacement: LiuOffset[], 
instruction: RS6000Architecture.TargetInstructionFromRS6000Instruction[
instruction: closureCaller.liu]];
};
{
closureCaller.oril _ RS6000Architecture.OrLConst[
ra: gpr2, rs: gpr2, ui: RS6000Architecture.Low[tocAddressCard]];
BreakWorldArchitecture.PokeInstruction[
pc: patchAddress, 
displacement: OrilOffset[], 
instruction: RS6000Architecture.TargetInstructionFromRS6000Instruction[
instruction: closureCaller.oril]];
};
{
closureCaller.liu2 _ RS6000Architecture.Liu[
rt: gpr3, upper: RS6000Architecture.High[breakData]];
BreakWorldArchitecture.PokeInstruction[
pc: patchAddress, 
displacement: Liu2Offset[], 
instruction: RS6000Architecture.TargetInstructionFromRS6000Instruction[
instruction: closureCaller.liu2]];
};
{
closureCaller.oril2 _ RS6000Architecture.OrLConst[
ra: gpr3, rs: gpr3, ui: RS6000Architecture.Low[breakData]];
BreakWorldArchitecture.PokeInstruction[
pc: patchAddress, 
displacement: Oril2Offset[], 
instruction: RS6000Architecture.TargetInstructionFromRS6000Instruction[
instruction: closureCaller.oril2]];
};
{
clientProcAddress: RS6000Architecture.RS6000Address ~ 
RS6000BreakWorldUtilities.RS6000AddressFromBreakWorldAddress[
address: breakProc];
clientProcAddressCard: CARD32 ~ LOOPHOLE[clientProcAddress];

IF clientProcAddress.IsNullRS6000Address[] THEN {
ERROR Breakpoint.CantSet[
code: $CantFindClientProc, 
message: "Can't find the register save procedure"];
};


closureCaller.liu3 _ RS6000Architecture.Liu[
rt: gpr0, upper: RS6000Architecture.High[clientProcAddressCard]];
BreakWorldArchitecture.PokeInstruction[
pc: patchAddress, 
displacement: Liu3Offset[], 
instruction: RS6000Architecture.TargetInstructionFromRS6000Instruction[
instruction: closureCaller.liu3]];

closureCaller.oril3 _ RS6000Architecture.OrLConst[
ra: gpr0, rs: gpr0, ui: RS6000Architecture.Low[clientProcAddressCard]];
BreakWorldArchitecture.PokeInstruction[
pc: patchAddress, 
displacement: Oril3Offset[], 
instruction: RS6000Architecture.TargetInstructionFromRS6000Instruction[
instruction: closureCaller.oril3]];

closureCaller.mtspr3 _ RS6000Architecture.Mtspr[rt: gpr0, spr: ctr, rc: FALSE];
BreakWorldArchitecture.PokeInstruction[
pc: patchAddress, 
displacement: Mtspr3Offset[], 
instruction: RS6000Architecture.TargetInstructionFromRS6000Instruction[
instruction: closureCaller.mtspr3]];

{
restoreAddress: RS6000Architecture.RS6000Address ~ 
RS6000Architecture.RS6000AddressFromDisplacement[
address: patchRS6000Address, displacement: Lm1Offset[]];
restoreAddressCard: CARD32 ~ LOOPHOLE[restoreAddress];

closureCaller.liu4 _ RS6000Architecture.Liu[
rt: gpr0, upper: RS6000Architecture.High[restoreAddressCard]];
BreakWorldArchitecture.PokeInstruction[
pc: patchAddress, 
displacement: Liu4Offset[], 
instruction: RS6000Architecture.TargetInstructionFromRS6000Instruction[
instruction: closureCaller.liu4]];

closureCaller.oril4 _ RS6000Architecture.OrLConst[
ra: gpr0, rs: gpr0, ui: RS6000Architecture.Low[restoreAddressCard]];
BreakWorldArchitecture.PokeInstruction[
pc: patchAddress, 
displacement: Oril4Offset[], 
instruction: RS6000Architecture.TargetInstructionFromRS6000Instruction[
instruction: closureCaller.oril4]];
};

closureCaller.mtspr4 _ RS6000Architecture.Mtspr[rt: gpr0, spr: lr, rc: FALSE];
BreakWorldArchitecture.PokeInstruction[
pc: patchAddress, 
displacement: Mtspr4Offset[], 
instruction: RS6000Architecture.TargetInstructionFromRS6000Instruction[
instruction: closureCaller.mtspr4]];

closureCaller.bctr _ RS6000Architecture.Bctr[];
BreakWorldArchitecture.PokeInstruction[
pc: patchAddress, 
displacement: BctrOffset[], 
instruction: RS6000Architecture.TargetInstructionFromRS6000Instruction[
instruction: closureCaller.bctr]];
};

{
closureCaller.lm1 _ RS6000Architecture.Lm[rt: gpr28, offset: 248, ra: gpr1];
BreakWorldArchitecture.PokeInstruction[
pc: patchAddress, 
displacement: Lm1Offset[], 
instruction: RS6000Architecture.TargetInstructionFromRS6000Instruction[
instruction: closureCaller.lm1]];

closureCaller.mtmq _ RS6000Architecture.Mtspr[rt: gpr31, spr: mq, rc: FALSE];
BreakWorldArchitecture.PokeInstruction[
pc: patchAddress, displacement: MtmqOffset[], 
instruction: RS6000Architecture.TargetInstructionFromRS6000Instruction[
instruction: closureCaller.mtmq]];

closureCaller.mtxer _ RS6000Architecture.Mtspr[rt: gpr30, spr: xfr, rc: FALSE];
BreakWorldArchitecture.PokeInstruction[
pc: patchAddress, displacement: MtxerOffset[], 
instruction: RS6000Architecture.TargetInstructionFromRS6000Instruction[
instruction: closureCaller.mtxer]];

closureCaller.mtctr _ RS6000Architecture.Mtspr[rt: gpr29, spr: ctr, rc: FALSE];
BreakWorldArchitecture.PokeInstruction[
pc: patchAddress, displacement: MtctrOffset[], 
instruction: RS6000Architecture.TargetInstructionFromRS6000Instruction[
instruction: closureCaller.mtctr]];

closureCaller.mtcrf _ RS6000Architecture.Mtcrf[fxm: [TRUE, TRUE, TRUE, TRUE, TRUE, TRUE, TRUE, TRUE], rs: gpr28, rc: FALSE];
BreakWorldArchitecture.PokeInstruction[
pc: patchAddress, displacement: MtcrfOffset[], 
instruction: RS6000Architecture.TargetInstructionFromRS6000Instruction[
instruction: closureCaller.mtcrf]];
};
{
closureCaller.l _ RS6000Architecture.L[rt: gpr0, offset: frameSize-4, ra: gpr1];
BreakWorldArchitecture.PokeInstruction[
pc: patchAddress, 
displacement: LOffset[], 
instruction: RS6000Architecture.TargetInstructionFromRS6000Instruction[
instruction: closureCaller.l]];
};
{
closureCaller.mtspr _ RS6000Architecture.Mtspr[rt: gpr0, spr: ctr, rc: FALSE];
BreakWorldArchitecture.PokeInstruction[
pc: patchAddress, 
displacement: MtsprOffset[], 
instruction: RS6000Architecture.TargetInstructionFromRS6000Instruction[
instruction: closureCaller.mtspr]];
};
{
closureCaller.lm _ RS6000Architecture.Lm[rt: gpr0, offset: gprSaveArea, ra: gpr1];
BreakWorldArchitecture.PokeInstruction[
pc: patchAddress, 
displacement: LmOffset[], 
instruction: RS6000Architecture.TargetInstructionFromRS6000Instruction[
instruction: closureCaller.lm]];
};
{
closureCaller.ai _ RS6000Architecture.Ai[rt: gpr1, ra: gpr1, si: frameSize];
BreakWorldArchitecture.PokeInstruction[
pc: patchAddress, 
displacement: AiOffset[], 
instruction: RS6000Architecture.TargetInstructionFromRS6000Instruction[
instruction: closureCaller.ai]];
};
};
EXITS
Cannot => {
ERROR Breakpoint.CantSet[code: errorCode, message: errorMessage];
};
};
};
};

InstallManger: PROCEDURE [
address: BreakWorldArchitecture.Address, patch: Shepherd.Patch]
RETURNS [] ~ {
IF address.IsNullAddress[] THEN {
ERROR Breakpoint.CantSet[code: $NullAddress, message: "InstallManger[nullAddress]"];
};
IF patch.IsNullPatch[] THEN {
ERROR Breakpoint.CantSet[code: $NullPatch, message: "InstallManger[nullPatch]"];
};
{
patchCodeAddress: BreakWorldArchitecture.Address ~ Shepherd.CodeAddressFromPatch[
patch: patch];
mangerAddress: BreakWorldArchitecture.Address ~ BreakWorldArchitecture.AddressFromDisplacement[
address: patchCodeAddress, displacement: MangerOffset[]];
errorCode: RS6000Manger.ErrorCode _ RS6000Manger.nullErrorCode;
errorMessage: RS6000Manger.ErrorMessage _ RS6000Manger.nullErrorMessage;

{	--Extra scope to contain EXITS.
RS6000Manger.Install[
address: address, manger: mangerAddress, patchCode: patchCodeAddress
! RS6000Manger.CantInstall => {
errorCode _ code;
errorMessage _ message;
GO TO Cannot;
}];
EXITS
Cannot => {
ERROR Breakpoint.CantSet[code: errorCode, message: errorMessage];
};
};
};
};

ClearBreakpoint: BreakpointPrivate.ClearBreakProcType ~ {
errorCode: Breakpoint.ErrorCode _ Breakpoint.nullErrorCode;
errorMessage: Breakpoint.ErrorMessage _ Breakpoint.nullErrorMessage;
IF Breakpoint.IsNullBreak[break: break] THEN {
ERROR Breakpoint.CantClear[code: $NullBreak, message: "Cannot clear null break"];
};
{	-- extra scope for EXITS
address: BreakWorldArchitecture.Address ~ Breakpoint.AddressFromBreak[break: break];
patch: Shepherd.Patch _ Breakpoint.PatchFromBreak[break: break];

Uninstall[patch: patch, address: address];
Shepherd.ReleasePatch[patch: patch
! Shepherd.NoMeadow => {
errorCode _ $NoMeadow;
errorMessage _ message;
GO TO Cannot;
};
  Shepherd.BusyMeadow => {
errorCode _ $BusyMeadow;
errorMessage _ message;
GO TO Cannot;
};];
Breakpoint.ForgetBreak[break: break
! Breakpoint.Cant => {
errorCode _ $CantForget;
errorMessage _ message;
GO TO Cannot;
}];
EXITS
Cannot => {
ERROR Breakpoint.CantClear[code: errorCode, message: errorMessage];
};
};
};

Uninstall: PROCEDURE [patch: Shepherd.Patch, address: BreakWorldArchitecture.Address] ~ {
IF patch.IsNullPatch[] THEN {
ERROR Breakpoint.CantSet[code: $NullPatch, message: "Uninstall[nullPatch]"];
};
IF address.IsNullAddress[] THEN {
ERROR Breakpoint.CantSet[code: $NullAddress, message: "Uninstall[nullAddress]"];
};
{
patchCodeAddress: BreakWorldArchitecture.Address ~ Shepherd.CodeAddressFromPatch[
patch: patch];
mangerAddress: BreakWorldArchitecture.Address ~ BreakWorldArchitecture.AddressFromDisplacement[
address: patchCodeAddress, displacement: MangerOffset[]];
errorCode: RS6000Manger.ErrorCode _ RS6000Manger.nullErrorCode;
errorMessage: RS6000Manger.ErrorMessage _ RS6000Manger.nullErrorMessage;

{	-- Extra scope for EXITS
RS6000Manger.Uninstall[
address: address, manger: mangerAddress, patchCode: patchCodeAddress
! RS6000Manger.CantUninstall => {
errorCode _ code;
errorMessage _ message;
GO TO Cannot;
}];
EXITS
Cannot => {
ERROR Breakpoint.CantClear[code: errorCode, message: errorMessage];
};
};
};
};

StuOffset: PROCEDURE [] 
RETURNS [TargetArchitecture.Displacement] ~ TRUSTED {
patchStruct: RS6000Breakpoint.PatchStruct;
patchStructAddress: LONG POINTER TO RS6000Breakpoint.PatchStruct ~ 
@patchStruct;
patchStructCard: CARD32 ~ LOOPHOLE[patchStructAddress];
stuAddress: LONG POINTER TO RS6000Architecture.RS6000Instruction ~ 
@patchStruct.closureCaller.stu;
stuCard: CARD32 ~ LOOPHOLE[stuAddress];
offset: TargetArchitecture.Displacement ~
(stuCard - patchStructCard) * BYTES[UNIT];

RETURN [offset];
};
StmOffset: PROCEDURE [] 
RETURNS [TargetArchitecture.Displacement] ~ TRUSTED {
patchStruct: RS6000Breakpoint.PatchStruct;
patchStructAddress: LONG POINTER TO RS6000Breakpoint.PatchStruct ~ 
@patchStruct;
patchStructCard: CARD32 ~ LOOPHOLE[patchStructAddress];
stmAddress: LONG POINTER TO RS6000Architecture.RS6000Instruction ~ 
@patchStruct.closureCaller.stm;
stmCard: CARD32 ~ LOOPHOLE[stmAddress];
offset: TargetArchitecture.Displacement ~
(stmCard - patchStructCard) * BYTES[UNIT];

RETURN [offset];
};
MfsprOffset: PROCEDURE [] 
RETURNS [TargetArchitecture.Displacement] ~ TRUSTED {
patchStruct: RS6000Breakpoint.PatchStruct;
patchStructAddress: LONG POINTER TO RS6000Breakpoint.PatchStruct ~ 
@patchStruct;
patchStructCard: CARD32 ~ LOOPHOLE[patchStructAddress];
mfsprAddress: LONG POINTER TO RS6000Architecture.RS6000Instruction ~ 
@patchStruct.closureCaller.mfspr;
mfsprCard: CARD32 ~ LOOPHOLE[mfsprAddress];
offset: TargetArchitecture.Displacement ~
(mfsprCard - patchStructCard) * BYTES[UNIT];

RETURN [offset];
};
StOffset: PROCEDURE [] 
RETURNS [TargetArchitecture.Displacement] ~ TRUSTED {
patchStruct: RS6000Breakpoint.PatchStruct;
patchStructAddress: LONG POINTER TO RS6000Breakpoint.PatchStruct ~ 
@patchStruct;
patchStructCard: CARD32 ~ LOOPHOLE[patchStructAddress];
stAddress: LONG POINTER TO RS6000Architecture.RS6000Instruction ~ 
@patchStruct.closureCaller.st;
stCard: CARD32 ~ LOOPHOLE[stAddress];
offset: TargetArchitecture.Displacement ~
(stCard - patchStructCard) * BYTES[UNIT];

RETURN [offset];
};
Liu0Offset: PROCEDURE [] 
RETURNS [TargetArchitecture.Displacement] ~ TRUSTED {
patchStruct: RS6000Breakpoint.PatchStruct;
patchStructAddress: LONG POINTER TO RS6000Breakpoint.PatchStruct ~ 
@patchStruct;
patchStructCard: CARD32 ~ LOOPHOLE[patchStructAddress];
liu0Address: LONG POINTER TO RS6000Architecture.RS6000Instruction ~ 
@patchStruct.closureCaller.liu0;
liu0Card: CARD32 ~ LOOPHOLE[liu0Address];
offset: TargetArchitecture.Displacement ~
(liu0Card - patchStructCard) * BYTES[UNIT];

RETURN [offset];
};
Oril0Offset: PROCEDURE [] 
RETURNS [TargetArchitecture.Displacement] ~ TRUSTED {
patchStruct: RS6000Breakpoint.PatchStruct;
patchStructAddress: LONG POINTER TO RS6000Breakpoint.PatchStruct ~ 
@patchStruct;
patchStructCard: CARD32 ~ LOOPHOLE[patchStructAddress];
oril0Address: LONG POINTER TO RS6000Architecture.RS6000Instruction ~ 
@patchStruct.closureCaller.oril0;
oril0Card: CARD32 ~ LOOPHOLE[oril0Address];
offset: TargetArchitecture.Displacement ~
(oril0Card - patchStructCard) * BYTES[UNIT];

RETURN [offset];
};
St0Offset: PROCEDURE [] 
RETURNS [TargetArchitecture.Displacement] ~ TRUSTED {
patchStruct: RS6000Breakpoint.PatchStruct;
patchStructAddress: LONG POINTER TO RS6000Breakpoint.PatchStruct ~ 
@patchStruct;
patchStructCard: CARD32 ~ LOOPHOLE[patchStructAddress];
st0Address: LONG POINTER TO RS6000Architecture.RS6000Instruction ~ 
@patchStruct.closureCaller.st0;
st0Card: CARD32 ~ LOOPHOLE[st0Address];
offset: TargetArchitecture.Displacement ~
(st0Card - patchStructCard) * BYTES[UNIT];

RETURN [offset];
};
MfmqOffset: PROCEDURE [] 
RETURNS [TargetArchitecture.Displacement] ~ TRUSTED {
patchStruct: RS6000Breakpoint.PatchStruct;
patchStructAddress: LONG POINTER TO RS6000Breakpoint.PatchStruct ~ 
@patchStruct;
patchStructCard: CARD32 ~ LOOPHOLE[patchStructAddress];
mfmqAddress: LONG POINTER TO RS6000Architecture.RS6000Instruction ~ 
@patchStruct.closureCaller.mfmq;
mfmqCard: CARD32 ~ LOOPHOLE[mfmqAddress];
offset: TargetArchitecture.Displacement ~
(mfmqCard - patchStructCard) * BYTES[UNIT];

RETURN [offset];
};
MfxerOffset: PROCEDURE [] 
RETURNS [TargetArchitecture.Displacement] ~ TRUSTED {
patchStruct: RS6000Breakpoint.PatchStruct;
patchStructAddress: LONG POINTER TO RS6000Breakpoint.PatchStruct ~ 
@patchStruct;
patchStructCard: CARD32 ~ LOOPHOLE[patchStructAddress];
mfxerAddress: LONG POINTER TO RS6000Architecture.RS6000Instruction ~ 
@patchStruct.closureCaller.mfxer;
mfxerCard: CARD32 ~ LOOPHOLE[mfxerAddress];
offset: TargetArchitecture.Displacement ~
(mfxerCard - patchStructCard) * BYTES[UNIT];

RETURN [offset];
};
MfctrOffset: PROCEDURE [] 
RETURNS [TargetArchitecture.Displacement] ~ TRUSTED {
patchStruct: RS6000Breakpoint.PatchStruct;
patchStructAddress: LONG POINTER TO RS6000Breakpoint.PatchStruct ~ 
@patchStruct;
patchStructCard: CARD32 ~ LOOPHOLE[patchStructAddress];
mfctrAddress: LONG POINTER TO RS6000Architecture.RS6000Instruction ~ 
@patchStruct.closureCaller.mfctr;
mfctrCard: CARD32 ~ LOOPHOLE[mfctrAddress];
offset: TargetArchitecture.Displacement ~
(mfctrCard - patchStructCard) * BYTES[UNIT];

RETURN [offset];
};
MfcrOffset: PROCEDURE [] 
RETURNS [TargetArchitecture.Displacement] ~ TRUSTED {
patchStruct: RS6000Breakpoint.PatchStruct;
patchStructAddress: LONG POINTER TO RS6000Breakpoint.PatchStruct ~ 
@patchStruct;
patchStructCard: CARD32 ~ LOOPHOLE[patchStructAddress];
mfcrAddress: LONG POINTER TO RS6000Architecture.RS6000Instruction ~ 
@patchStruct.closureCaller.mfcr;
mfcrCard: CARD32 ~ LOOPHOLE[mfcrAddress];
offset: TargetArchitecture.Displacement ~
(mfcrCard - patchStructCard) * BYTES[UNIT];

RETURN [offset];
};
Stm1Offset: PROCEDURE [] 
RETURNS [TargetArchitecture.Displacement] ~ TRUSTED {
patchStruct: RS6000Breakpoint.PatchStruct;
patchStructAddress: LONG POINTER TO RS6000Breakpoint.PatchStruct ~ 
@patchStruct;
patchStructCard: CARD32 ~ LOOPHOLE[patchStructAddress];
stm1Address: LONG POINTER TO RS6000Architecture.RS6000Instruction ~ 
@patchStruct.closureCaller.stm1;
stm1Card: CARD32 ~ LOOPHOLE[stm1Address];
offset: TargetArchitecture.Displacement ~
(stm1Card - patchStructCard) * BYTES[UNIT];

RETURN [offset];
};
MtmqOffset: PROCEDURE [] 
RETURNS [TargetArchitecture.Displacement] ~ TRUSTED {
patchStruct: RS6000Breakpoint.PatchStruct;
patchStructAddress: LONG POINTER TO RS6000Breakpoint.PatchStruct ~ 
@patchStruct;
patchStructCard: CARD32 ~ LOOPHOLE[patchStructAddress];
mtmqAddress: LONG POINTER TO RS6000Architecture.RS6000Instruction ~ 
@patchStruct.closureCaller.mtmq;
mtmqCard: CARD32 ~ LOOPHOLE[mtmqAddress];
offset: TargetArchitecture.Displacement ~
(mtmqCard - patchStructCard) * BYTES[UNIT];

RETURN [offset];
};
MtxerOffset: PROCEDURE [] 
RETURNS [TargetArchitecture.Displacement] ~ TRUSTED {
patchStruct: RS6000Breakpoint.PatchStruct;
patchStructAddress: LONG POINTER TO RS6000Breakpoint.PatchStruct ~ 
@patchStruct;
patchStructCard: CARD32 ~ LOOPHOLE[patchStructAddress];
mtxerAddress: LONG POINTER TO RS6000Architecture.RS6000Instruction ~ 
@patchStruct.closureCaller.mtxer;
mtxerCard: CARD32 ~ LOOPHOLE[mtxerAddress];
offset: TargetArchitecture.Displacement ~
(mtxerCard - patchStructCard) * BYTES[UNIT];

RETURN [offset];
};
MtctrOffset: PROCEDURE [] 
RETURNS [TargetArchitecture.Displacement] ~ TRUSTED {
patchStruct: RS6000Breakpoint.PatchStruct;
patchStructAddress: LONG POINTER TO RS6000Breakpoint.PatchStruct ~ 
@patchStruct;
patchStructCard: CARD32 ~ LOOPHOLE[patchStructAddress];
mtctrAddress: LONG POINTER TO RS6000Architecture.RS6000Instruction ~ 
@patchStruct.closureCaller.mtctr;
mtctrCard: CARD32 ~ LOOPHOLE[mtctrAddress];
offset: TargetArchitecture.Displacement ~
(mtctrCard - patchStructCard) * BYTES[UNIT];

RETURN [offset];
};
MtcrfOffset: PROCEDURE [] 
RETURNS [TargetArchitecture.Displacement] ~ TRUSTED {
patchStruct: RS6000Breakpoint.PatchStruct;
patchStructAddress: LONG POINTER TO RS6000Breakpoint.PatchStruct ~ 
@patchStruct;
patchStructCard: CARD32 ~ LOOPHOLE[patchStructAddress];
mtcrfAddress: LONG POINTER TO RS6000Architecture.RS6000Instruction ~ 
@patchStruct.closureCaller.mtcrf;
mtcrfCard: CARD32 ~ LOOPHOLE[mtcrfAddress];
offset: TargetArchitecture.Displacement ~
(mtcrfCard - patchStructCard) * BYTES[UNIT];

RETURN [offset];
};
LiuOffset: PROCEDURE [] 
RETURNS [TargetArchitecture.Displacement] ~ TRUSTED {
patchStruct: RS6000Breakpoint.PatchStruct;
patchStructAddress: LONG POINTER TO RS6000Breakpoint.PatchStruct ~ 
@patchStruct;
patchStructCard: CARD32 ~ LOOPHOLE[patchStructAddress];
liuAddress: LONG POINTER TO RS6000Architecture.RS6000Instruction ~ 
@patchStruct.closureCaller.liu;
liuCard: CARD32 ~ LOOPHOLE[liuAddress];
offset: TargetArchitecture.Displacement ~
(liuCard - patchStructCard) * BYTES[UNIT];

RETURN [offset];
};
OrilOffset: PROCEDURE [] 
RETURNS [TargetArchitecture.Displacement] ~ TRUSTED {
patchStruct: RS6000Breakpoint.PatchStruct;
patchStructAddress: LONG POINTER TO RS6000Breakpoint.PatchStruct ~ 
@patchStruct;
patchStructCard: CARD32 ~ LOOPHOLE[patchStructAddress];
orilAddress: LONG POINTER TO RS6000Architecture.RS6000Instruction ~ 
@patchStruct.closureCaller.oril;
orilCard: CARD32 ~ LOOPHOLE[orilAddress];
offset: TargetArchitecture.Displacement ~
(orilCard - patchStructCard) * BYTES[UNIT];

RETURN [offset];
};
Liu2Offset: PROCEDURE [] 
RETURNS [TargetArchitecture.Displacement] ~ TRUSTED {
patchStruct: RS6000Breakpoint.PatchStruct;
patchStructAddress: LONG POINTER TO RS6000Breakpoint.PatchStruct ~ 
@patchStruct;
patchStructCard: CARD32 ~ LOOPHOLE[patchStructAddress];
liu2Address: LONG POINTER TO RS6000Architecture.RS6000Instruction ~ 
@patchStruct.closureCaller.liu2;
liu2Card: CARD32 ~ LOOPHOLE[liu2Address];
offset: TargetArchitecture.Displacement ~
(liu2Card - patchStructCard) * BYTES[UNIT];

RETURN [offset];
};
Oril2Offset: PROCEDURE [] 
RETURNS [TargetArchitecture.Displacement] ~ TRUSTED {
patchStruct: RS6000Breakpoint.PatchStruct;
patchStructAddress: LONG POINTER TO RS6000Breakpoint.PatchStruct ~ 
@patchStruct;
patchStructCard: CARD32 ~ LOOPHOLE[patchStructAddress];
oril2Address: LONG POINTER TO RS6000Architecture.RS6000Instruction ~ 
@patchStruct.closureCaller.oril2;
oril2Card: CARD32 ~ LOOPHOLE[oril2Address];
offset: TargetArchitecture.Displacement ~
(oril2Card - patchStructCard) * BYTES[UNIT];

RETURN [offset];
};
Liu3Offset: PROCEDURE [] 
RETURNS [TargetArchitecture.Displacement] ~ TRUSTED {
patchStruct: RS6000Breakpoint.PatchStruct;
patchStructAddress: LONG POINTER TO RS6000Breakpoint.PatchStruct ~ 
@patchStruct;
patchStructCard: CARD32 ~ LOOPHOLE[patchStructAddress];
liu3Address: LONG POINTER TO RS6000Architecture.RS6000Instruction ~ 
@patchStruct.closureCaller.liu3;
liu3Card: CARD32 ~ LOOPHOLE[liu3Address];
offset: TargetArchitecture.Displacement ~
(liu3Card - patchStructCard) * BYTES[UNIT];

RETURN [offset];
};
Oril3Offset: PROCEDURE [] 
RETURNS [TargetArchitecture.Displacement] ~ TRUSTED {
patchStruct: RS6000Breakpoint.PatchStruct;
patchStructAddress: LONG POINTER TO RS6000Breakpoint.PatchStruct ~ 
@patchStruct;
patchStructCard: CARD32 ~ LOOPHOLE[patchStructAddress];
oril3Address: LONG POINTER TO RS6000Architecture.RS6000Instruction ~ 
@patchStruct.closureCaller.oril3;
oril3Card: CARD32 ~ LOOPHOLE[oril3Address];
offset: TargetArchitecture.Displacement ~
(oril3Card - patchStructCard) * BYTES[UNIT];

RETURN [offset];
};
Mtspr3Offset: PROCEDURE [] 
RETURNS [TargetArchitecture.Displacement] ~ TRUSTED {
patchStruct: RS6000Breakpoint.PatchStruct;
patchStructAddress: LONG POINTER TO RS6000Breakpoint.PatchStruct ~ 
@patchStruct;
patchStructCard: CARD32 ~ LOOPHOLE[patchStructAddress];
mtspr3Address: LONG POINTER TO RS6000Architecture.RS6000Instruction ~ 
@patchStruct.closureCaller.mtspr3;
mtspr3Card: CARD32 ~ LOOPHOLE[mtspr3Address];
offset: TargetArchitecture.Displacement ~
(mtspr3Card - patchStructCard) * BYTES[UNIT];

RETURN [offset];
};
Liu4Offset: PROCEDURE [] 
RETURNS [TargetArchitecture.Displacement] ~ TRUSTED {
patchStruct: RS6000Breakpoint.PatchStruct;
patchStructAddress: LONG POINTER TO RS6000Breakpoint.PatchStruct ~ 
@patchStruct;
patchStructCard: CARD32 ~ LOOPHOLE[patchStructAddress];
liu4Address: LONG POINTER TO RS6000Architecture.RS6000Instruction ~ 
@patchStruct.closureCaller.liu4;
liu4Card: CARD32 ~ LOOPHOLE[liu4Address];
offset: TargetArchitecture.Displacement ~
(liu4Card - patchStructCard) * BYTES[UNIT];

RETURN [offset];
};
Oril4Offset: PROCEDURE [] 
RETURNS [TargetArchitecture.Displacement] ~ TRUSTED {
patchStruct: RS6000Breakpoint.PatchStruct;
patchStructAddress: LONG POINTER TO RS6000Breakpoint.PatchStruct ~ 
@patchStruct;
patchStructCard: CARD32 ~ LOOPHOLE[patchStructAddress];
oril4Address: LONG POINTER TO RS6000Architecture.RS6000Instruction ~ 
@patchStruct.closureCaller.oril4;
oril4Card: CARD32 ~ LOOPHOLE[oril4Address];
offset: TargetArchitecture.Displacement ~
(oril4Card - patchStructCard) * BYTES[UNIT];

RETURN [offset];
};
Mtspr4Offset: PROCEDURE [] 
RETURNS [TargetArchitecture.Displacement] ~ TRUSTED {
patchStruct: RS6000Breakpoint.PatchStruct;
patchStructAddress: LONG POINTER TO RS6000Breakpoint.PatchStruct ~ 
@patchStruct;
patchStructCard: CARD32 ~ LOOPHOLE[patchStructAddress];
mtspr4Address: LONG POINTER TO RS6000Architecture.RS6000Instruction ~ 
@patchStruct.closureCaller.mtspr4;
mtspr4Card: CARD32 ~ LOOPHOLE[mtspr4Address];
offset: TargetArchitecture.Displacement ~
(mtspr4Card - patchStructCard) * BYTES[UNIT];

RETURN [offset];
};
BctrOffset: PROCEDURE [] 
RETURNS [TargetArchitecture.Displacement] ~ TRUSTED {
patchStruct: RS6000Breakpoint.PatchStruct;
patchStructAddress: LONG POINTER TO RS6000Breakpoint.PatchStruct ~ 
@patchStruct;
patchStructCard: CARD32 ~ LOOPHOLE[patchStructAddress];
bctrAddress: LONG POINTER TO RS6000Architecture.RS6000Instruction ~ 
@patchStruct.closureCaller.bctr;
bctrCard: CARD32 ~ LOOPHOLE[bctrAddress];
offset: TargetArchitecture.Displacement ~
(bctrCard - patchStructCard) * BYTES[UNIT];

RETURN [offset];
};
Lm1Offset: PROCEDURE [] 
RETURNS [TargetArchitecture.Displacement] ~ TRUSTED {
patchStruct: RS6000Breakpoint.PatchStruct;
patchStructAddress: LONG POINTER TO RS6000Breakpoint.PatchStruct ~ 
@patchStruct;
patchStructCard: CARD32 ~ LOOPHOLE[patchStructAddress];
lm1Address: LONG POINTER TO RS6000Architecture.RS6000Instruction ~ 
@patchStruct.closureCaller.lm1;
lm1Card: CARD32 ~ LOOPHOLE[lm1Address];
offset: TargetArchitecture.Displacement ~
(lm1Card - patchStructCard) * BYTES[UNIT];

RETURN [offset];
};
LOffset: PROCEDURE [] 
RETURNS [TargetArchitecture.Displacement] ~ TRUSTED {
patchStruct: RS6000Breakpoint.PatchStruct;
patchStructAddress: LONG POINTER TO RS6000Breakpoint.PatchStruct ~ 
@patchStruct;
patchStructCard: CARD32 ~ LOOPHOLE[patchStructAddress];
lAddress: LONG POINTER TO RS6000Architecture.RS6000Instruction ~ 
@patchStruct.closureCaller.l;
lCard: CARD32 ~ LOOPHOLE[lAddress];
offset: TargetArchitecture.Displacement ~
(lCard - patchStructCard) * BYTES[UNIT];

RETURN [offset];
};
MtsprOffset: PROCEDURE [] 
RETURNS [TargetArchitecture.Displacement] ~ TRUSTED {
patchStruct: RS6000Breakpoint.PatchStruct;
patchStructAddress: LONG POINTER TO RS6000Breakpoint.PatchStruct ~ 
@patchStruct;
patchStructCard: CARD32 ~ LOOPHOLE[patchStructAddress];
mtsprAddress: LONG POINTER TO RS6000Architecture.RS6000Instruction ~ 
@patchStruct.closureCaller.mtspr;
mtsprCard: CARD32 ~ LOOPHOLE[mtsprAddress];
offset: TargetArchitecture.Displacement ~
(mtsprCard - patchStructCard) * BYTES[UNIT];

RETURN [offset];
};
LmOffset: PROCEDURE [] 
RETURNS [TargetArchitecture.Displacement] ~ TRUSTED {
patchStruct: RS6000Breakpoint.PatchStruct;
patchStructAddress: LONG POINTER TO RS6000Breakpoint.PatchStruct ~ 
@patchStruct;
patchStructCard: CARD32 ~ LOOPHOLE[patchStructAddress];
lmAddress: LONG POINTER TO RS6000Architecture.RS6000Instruction ~ 
@patchStruct.closureCaller.lm;
lmCard: CARD32 ~ LOOPHOLE[lmAddress];
offset: TargetArchitecture.Displacement ~
(lmCard - patchStructCard) * BYTES[UNIT];

RETURN [offset];
};
AiOffset: PROCEDURE [] 
RETURNS [TargetArchitecture.Displacement] ~ TRUSTED {
patchStruct: RS6000Breakpoint.PatchStruct;
patchStructAddress: LONG POINTER TO RS6000Breakpoint.PatchStruct ~ 
@patchStruct;
patchStructCard: CARD32 ~ LOOPHOLE[patchStructAddress];
aiAddress: LONG POINTER TO RS6000Architecture.RS6000Instruction ~ 
@patchStruct.closureCaller.ai;
aiCard: CARD32 ~ LOOPHOLE[aiAddress];
offset: TargetArchitecture.Displacement ~
(aiCard - patchStructCard) * BYTES[UNIT];

RETURN [offset];
};
MangerOffset: PROCEDURE [] 
RETURNS [TargetArchitecture.Displacement] ~ TRUSTED {
patchStruct: RS6000Breakpoint.PatchStruct;
patchStructAddress: LONG POINTER TO RS6000Breakpoint.PatchStruct ~ 
@patchStruct;
patchStructCard: CARD32 ~ LOOPHOLE[patchStructAddress];
mangerAddress: LONG POINTER TO RS6000Manger.Manger ~ 
@patchStruct.manger;
mangerCard: CARD32 ~ LOOPHOLE[mangerAddress];
offset: TargetArchitecture.Displacement ~
(mangerCard - patchStructCard) * BYTES[UNIT];

RETURN [offset];
};

BreakpointPrivate.RegisterTargetBreaks[NEW[BreakpointPrivate.TargetBreaksBody _ [
"RS6000",
SetBreakpoint,
ClearBreakpoint]]];
}.

ζ
RS6000BreakpointImpl.mesa
Copyright Σ 1989, 1990, 1991, 1992, 1993 by Xerox Corporation.  All rights reserved.
Peter B. Kessler, July 11, 1990 11:06 am PDT

Target-dependent implementation of the functions from Breakpoint.
Udagawa, August 14, 1991 12:46 pm PDT
Laurie Horton, February 26, 1993 12:08 pm PST
Katsuyuki Komatsu March 5, 1992 5:51 pm PST

"Public" Procedures registered with Breakpoint.
PROCEDURE [
address: BreakWorldArchitecture.Address,
clientData: Breakpoint.ClientData,
breakProc: Breakpoint.BreakProc,
breakProcDataSegment: BreakWorldArchitecture.Address,
breakData: Breakpoint.BreakData,
damages: TargetArchitecture.RegisterClass _ TargetArchitecture.RegisterClass.all]
RETURNS [Breakpoint.Break]
CheckForDelaySlot: PROCEDURE [address: BreakWorldArchitecture.Address] 
RETURNS [] ~{
instruction: RS6000Architecture.RS6000Instruction ~
RS6000BreakWorldUtilities.RS6000InstructionFromBreakWorldAddress[address: address];
prevInstruction: RS6000Architecture.RS6000Instruction ~
RS6000BreakWorldUtilities.RS6000InstructionFromBreakWorldAddress[
address: address, displacement: -BYTES[RS6000Architecture.RS6000Instruction]];
nextInstruction: RS6000Architecture.RS6000Instruction ~
RS6000BreakWorldUtilities.RS6000InstructionFromBreakWorldAddress[
address: address, displacement: +BYTES[RS6000Architecture.RS6000Instruction]];
IF RS6000Architecture.IsDelayedControlTransfer[instruction: prevInstruction] THEN {
ERROR Breakpoint.CantSet[
code: $NotInDelaySlot, message: "Cannot set breakpoint in delay slot"];
};
RETURN;
};
CheckForDelaySlot[address: address];
-- Can't deallocate patches.
Well, I could just clear the size and address, but is that safe?
IF NOT patch.IsNullPatch[] THEN {
Shepherd.ReleasePatch[patch: patch];
};
Generate the code in the patch.
blSaveRegsAddress: RS6000Architecture.RS6000Address ~ 
RS6000Architecture.RS6000AddressFromDisplacement[
address: patchRS6000Address, displacement: BlOffset[]];
saveRegsAddress: RS6000Architecture.RS6000Address ~ 
RS6000BreakWorldUtilities.RS6000AddressFromBreakWorldAddress[
address: BreakWorldArchitecture.GetProcAddress[
breakWorld: BreakWorldArchitecture.BreakWorldFromBreakWorldAddress[
address: address], 
procName: registerSaveName]];

IF saveRegsAddress.IsNullRS6000Address[] THEN {
ERROR Breakpoint.CantSet[
code: $CantFindRegisterSaveProcedure, 
message: "Can't find the register save procedure"];
};

closureCaller.bl _ RS6000Architecture.B[pc: blSaveRegsAddress, to: saveRegsAddress, abs: FALSE, link: TRUE];
BreakWorldArchitecture.PokeInstruction[
pc: patchAddress, 
displacement: BlOffset[], 
instruction: RS6000Architecture.TargetInstructionFromRS6000Instruction[
instruction: closureCaller.bl]];

The registerSaveName procedure was moved INLINE because it was a cheap as doing an out-of-module call.


Need to construct a mnemonic constant for 248.
blClientProcAddress: RS6000Architecture.RS6000Address ~ 
RS6000Architecture.RS6000AddressFromDisplacement[
address: patchRS6000Address, displacement: Bl2Offset[]];
closureCaller.bl2 _ RS6000Architecture.B[pc: blClientProcAddress, to: clientProcAddress, abs: FALSE, link: TRUE];
BreakWorldArchitecture.PokeInstruction[
pc: patchAddress, 
displacement: Bl2Offset[], 
instruction: RS6000Architecture.TargetInstructionFromRS6000Instruction[
instruction: closureCaller.bl2]];

blRestoreRegsAddress: RS6000Architecture.RS6000Address ~ 
RS6000Architecture.RS6000AddressFromDisplacement[
address: patchRS6000Address, displacement: Lm1Offset[]];
restoreRegsAddress: RS6000Architecture.RS6000Address ~ 
RS6000BreakWorldUtilities.RS6000AddressFromBreakWorldAddress[
address: BreakWorldArchitecture.GetProcAddress[
breakWorld: BreakWorldArchitecture.BreakWorldFromBreakWorldAddress[
address: address],
procName: registerRestoreName]];

IF restoreRegsAddress.IsNullRS6000Address[] THEN {
ERROR Breakpoint.CantSet[
code: $CantFindRegisterRestoreProcedure, 
message: "Can't find the register restore procedure"];
};

The registerRestoreName procedure was moved INLINE because it was as cheap as doing an out-of-module call.

Need a mnemonic for 248.
PROCEDURE [break: Break] RETURNS [];
PatchStruct offset procedures.
PatchInstrOffset: PROCEDURE [] 
RETURNS [TargetArchitecture.Displacement] ~ TRUSTED {
patchStruct: RS6000Breakpoint.PatchStruct;
patchStructAddress: LONG POINTER TO RS6000Breakpoint.PatchStruct ~ 
@patchStruct;
patchStructCard: CARD32 ~ LOOPHOLE[patchStructAddress];
whichInstrAddrCard: CARD32 ~ LOOPHOLE[whichInstrAddr];
offset: TargetArchitecture.Displacement ~
(whichInstrAddrCard - patchStructCard) * BYTES[UNIT];

RETURN [offset];
}
BlOffset: PROCEDURE [] 
RETURNS [TargetArchitecture.Displacement] ~ TRUSTED {
patchStruct: RS6000Breakpoint.PatchStruct;
patchStructAddress: LONG POINTER TO RS6000Breakpoint.PatchStruct ~ 
@patchStruct;
patchStructCard: CARD32 ~ LOOPHOLE[patchStructAddress];
blAddress: LONG POINTER TO RS6000Architecture.RS6000Instruction ~ 
@patchStruct.closureCaller.bl;
blCard: CARD32 ~ LOOPHOLE[blAddress];
offset: TargetArchitecture.Displacement ~
(blCard - patchStructCard) * BYTES[UNIT];

RETURN [offset];
};
Bl2Offset: PROCEDURE [] 
RETURNS [TargetArchitecture.Displacement] ~ TRUSTED {
patchStruct: RS6000Breakpoint.PatchStruct;
patchStructAddress: LONG POINTER TO RS6000Breakpoint.PatchStruct ~ 
@patchStruct;
patchStructCard: CARD32 ~ LOOPHOLE[patchStructAddress];
bl2Address: LONG POINTER TO RS6000Architecture.RS6000Instruction ~ 
@patchStruct.closureCaller.bl2;
bl2Card: CARD32 ~ LOOPHOLE[bl2Address];
offset: TargetArchitecture.Displacement ~
(bl2Card - patchStructCard) * BYTES[UNIT];

RETURN [offset];
};


Main code

Κ(“–

"cedar" style•NewlineDelimiter

™
unit™Icodešœ
Οr
œI™TLš
œ,™,L™—™AL™%L™-L™+—™š
Οk	˜	L˜Lš
œ˜Lš
œ˜Lš
œ˜Lšœžœžœ˜Lš
œ˜Lš
œ˜Lš
œ˜Lš
œ
˜
Lš
œ	˜	Lš
œ˜L˜L˜——šΠlnœžœ
žœ
˜$šžœ
˜L–0 bp restIndentš
œ
˜
—L˜Lš
œ˜Ihead™/šΟn
œ(˜5Lšž	œ™žœ™ΌJš
œ/˜/Jš
œ+˜+L˜;Lš
œD˜Dš œž	œ,žœ™U™3Lš
œS™S—™7š
œA™ALšœ!žœ(™N——™7š
œA™ALšœ!žœ(™N——šžœKžœ™Sšžœ™Lš
œG™G—L™—Lšžœ
™L™—L˜šžœžœ˜!šžœ˜Lš
œK˜K—L˜—šžœžœ˜#šžœ˜Lš
œ˜Lš
œJ˜J—L˜—˜
˜5L˜/—L˜šžœ(žœ˜0šžœ˜Lš
œ˜Lš
œK˜K—L˜—L˜—L™$šœΟc˜!š
œ˜Jšœžœ˜:š
œ˜Jš
œ˜Jš
œ˜Jšžœ
žœ˜
Jš
œ˜—š
œ˜J˜Jš
œ˜Jšžœ
žœ˜
Jš
œ˜—š
œ˜Jš
œ˜Jš
œ˜Jšžœ
žœ˜
Jš
œ˜—š
œ˜Jš
œ˜Jš
œ˜Jšžœ
žœ˜
Jš
œ˜—š
œ˜Jš
œ˜Jš
œ˜Jšžœ
žœ˜
Jš
œ˜—Jš
œ˜—š
œ˜Jš
œ˜Jš
œ
˜
Jš
œ˜Jš
œ#˜#Jš
œ˜Jš
œ˜—Jš
œT˜T˜˜J˜J˜Jšžœ
žœ˜
J˜——š
ž˜˜™J™@—šžœ
žœžœ™!Jš
œ$™$J™—Lšžœ<˜AL˜——L˜—Lšžœ	˜Lš
œ˜L˜š œž	œβ
žœ˜‚šžœžœ˜!LšžœI˜NL˜—šžœžœ˜LšžœE˜JL˜—šžœžœ˜#LšžœK˜PL˜—š
œ˜Lš
œ˜Lš
œ˜Lš
œ˜Lš
œ˜Lš
œ˜Lš
œ˜—Lš
œ.˜.L˜L˜—š œž	œή
žœ˜‹šžœžœ˜!šžœ˜Lš
œB˜B—L˜—šžœžœ˜#šžœ˜Lš
œD˜D—L˜—šžœžœ˜šžœ˜Lš
œ>˜>—L˜—˜
˜6Jš
œO˜O—Lšœžœžœ˜>š
œ.˜.Jš
œT˜T—Jšœžœžœ
˜.Lš
œ[˜[˜7Jš
œT˜T—šœžœ˜Lš
œ&˜&Lš
œ0˜0Lš
œ/˜/Lš
œ$˜$—šœ
žœ˜Lš
œ-˜-Lš
œ/˜/Lš
œ$˜$—š
œ5˜5Lš
œV˜V—šœžœžœž˜:L•	CharProps8

PostfixXeroxCharCodes

PostfixXeroxCharCodesš
œ˜L–8

PostfixXeroxCharCodes

PostfixXeroxCharCodes	š
œ ˜ L–8

PostfixXeroxCharCodes

PostfixXeroxCharCodesš
œ#˜#L–

PostfixXeroxCharCodesšžœ˜—šœžœžœž˜=L–8

PostfixXeroxCharCodes

PostfixXeroxCharCodesš
œ˜L–8

PostfixXeroxCharCodes

PostfixXeroxCharCodes	š
œ#˜#L–8

PostfixXeroxCharCodes

PostfixXeroxCharCodesš
œ&˜&L–

PostfixXeroxCharCodesšžœ˜—L˜L™Lš
œ.˜.L˜L˜;L˜D˜
šœ
ž˜	˜$L˜L˜ELšžœ
žœ˜
L˜—˜!L˜L˜LLšžœ
žœ˜
L˜—˜)L˜L˜cLšžœ
žœ˜
L˜—˜-L˜L˜jLšžœ
žœ˜
L˜—L˜——L˜˜
Lš
œS˜Sš
œ'˜'Lš
œ˜Lš
œ˜š
œG˜GLš
œ!˜!——L˜—˜
Lš
œT˜Tš
œ'˜'Lš
œ˜Lš
œ˜š
œG˜GLš
œ!˜!——L˜—˜
LšœFžœ˜Mš
œ'˜'Lš
œ˜Lš
œ˜š
œG˜GLš
œ#˜#——L˜—L˜˜
Lš
œR˜Rš
œ'˜'Lš
œ,˜,š
œG˜GLš
œ ˜ ——L˜—˜
š
œ,˜,Lš
œB˜B—š
œ'˜'Lš
œ˜Lš
œ˜š
œG˜GLš
œ"˜"——L˜—˜
š
œ2˜2Lš
œH˜H—š
œ'˜'Lš
œ˜Lš
œ˜š
œG˜GLš
œ#˜#——L˜—˜
Lš
œS˜Sš
œ'˜'Lš
œ-˜-š
œG˜GLš
œ!˜!——L˜—˜
š
œ6™6š
œ1™1Lš
œ7™7——š
œ4™4š
œ=™=š
œ/™/š
œC™CLš
œ™—Lš
œ™———L™šžœ'žœ™/šžœ™Lš
œ&™&Lš
œ3™3—L™——™LšœYžœžœ™lš
œ'™'Lš
œ™Lš
œ™š
œG™GLš
œ ™ ——L™L™fL™LšœFžœ˜Mš
œ'˜'L˜.š
œG˜GL˜"——L™LšœHžœ˜Oš
œ'˜'L˜/š
œG˜GL˜#L˜——LšœHžœ˜Oš
œ'˜'L˜/š
œG˜GL˜#——L˜Lšœ<žœ˜Cš
œ'˜'L˜.š
œG˜GL˜"L˜——L™.L˜Nš
œ'˜'L˜.š
œG˜GL˜"——L˜L˜—˜
š
œ+˜+Lš
œ:˜:—š
œ'˜'Lš
œ˜Lš
œ˜š
œG˜GLš
œ!˜!——L˜—˜
š
œ1˜1Lš
œ@˜@—š
œ'˜'Lš
œ˜Lš
œ˜š
œG˜GLš
œ"˜"——L˜—˜
š
œ,˜,Lš
œ5˜5—š
œ'˜'Lš
œ˜Lš
œ˜š
œG˜GLš
œ"˜"——L˜—˜
š
œ2˜2Lš
œ;˜;—š
œ'˜'Lš
œ˜Lš
œ˜š
œG˜GLš
œ#˜#——L˜—˜
š
œ8™8š
œ1™1Lš
œ8™8——š
œ6˜6š
œ=˜=Jš
œ˜——Lšœžœžœ˜<J˜šžœ)žœ˜1šžœ˜Lš
œ˜Lš
œ3˜3—L˜—L˜Lšœ^žœžœ™qš
œ'™'Lš
œ™Lš
œ™š
œG™GLš
œ!™!——L˜˜,L˜A—š
œ'˜'Lš
œ˜L˜š
œG˜GL˜"——L˜˜2L˜G—š
œ'˜'Lš
œ˜L˜š
œG˜GL˜#——L˜LšœHžœ˜Oš
œ'˜'Lš
œ˜L˜š
œG˜GL˜$——L˜L˜
˜3š
œ1˜1L˜8——šœžœžœ˜6L˜—˜,L˜>—š
œ'˜'Lš
œ˜L˜š
œG˜GL˜"——L˜˜2L˜D—š
œ'˜'Lš
œ˜L˜š
œG˜GL˜#——L˜L˜LšœGžœ˜Nš
œ'˜'Lš
œ˜L˜š
œG˜GL˜$——L˜L˜/š
œ'˜'Lš
œ˜L˜š
œG˜GL˜"———˜L˜L™—˜
š
œ9™9š
œ1™1L™8——š
œ7™7š
œ=™=š
œ/™/š
œC™CLš
œ™—Lš
œ ™ ———L™šžœ*žœ™2šžœ™Lš
œ)™)Lš
œ6™6—L™——™L™jL™L™L˜Lš
œ'˜'Lš
œ˜L˜š
œG˜GL˜!L˜——LšœFžœ˜Mš
œ'˜'L˜.š
œG˜GL˜"L˜——LšœHžœ˜Oš
œ'˜'L˜/š
œG˜GL˜#——L˜LšœHžœ˜Oš
œ'˜'L˜/š
œG˜GL˜#——L˜Lšœ5žœžœžœžœžœžœžœžœžœ˜|š
œ'˜'L˜/š
œG˜GL˜#——L˜—˜
Lš
œP˜Pš
œ'˜'Lš
œ˜Lš
œ˜š
œG˜GLš
œ˜——L˜—˜
LšœGžœ˜Nš
œ'˜'Lš
œ˜Lš
œ˜š
œG˜GLš
œ#˜#——L˜—˜
Lš
œR˜Rš
œ'˜'Lš
œ˜Lš
œ˜š
œG˜GLš
œ ˜ ——L˜—˜
Lš
œL˜Lš
œ'˜'Lš
œ˜Lš
œ˜š
œG˜GLš
œ ˜ ——L˜—L˜—š
ž˜˜Lšžœ<˜AL˜—L˜—L˜—˜L˜—š 
œž	œCžœ˜išžœžœ˜!LšžœO˜TL˜—šžœžœ˜LšžœK˜PL˜—˜
š
œQ˜QLš
œ˜—š
œ_˜_Lš
œ9˜9—Lš
œ?˜?Lš
œH˜HL˜šœ‘˜!š
œ˜Lš
œD˜Dš
œ˜L˜L˜Lšžœ
žœ˜
Lš
œ˜——š
ž˜˜Lšžœ<˜AL˜——L˜—L˜—L˜L˜—š œ*˜9Jšž	œžœ™$Jš
œ;˜;Jš
œD˜Dšžœ&žœ˜.JšžœL˜QJ˜—šœ‘˜Jš
œT˜TJš
œ@˜@J˜Lš
œ*˜*š
œ"˜"˜L˜L˜Lšžœ
žœ˜
L˜—˜J˜L˜Lšžœ
žœ˜
L˜——š
œ#˜#š
œ˜L˜L˜Lšžœ
žœ˜
L˜——š
ž˜˜Lšžœ>˜CL˜——Jš
œ˜—Lš
œ˜L˜—š 	œž	œE˜Yšžœžœ˜LšžœG˜LL˜—šžœžœ˜!LšžœK˜PL˜—˜
š
œQ˜QLš
œ˜—š
œ_˜_Lš
œ9˜9—L˜?L˜HL˜šœ‘˜š
œ˜Lš
œD˜D˜!L˜L˜Lšžœ
žœ˜
L˜——š
ž˜š
œ˜Lšžœ>˜CLš
œ˜——L˜—L˜—L˜L˜——™š œž	œžœ%žœ™UL™*šœžœ
žœ
žœ ™CL™
—Lšœžœžœ™7Lšœžœžœ™6š
œ)™)Lšœ)žœ
žœ™5—L™Lšžœ
™L™
—š 	œž	œžœ%žœ˜NLš
œ*˜*šœžœ
žœ
žœ ˜CLš
œ
˜
—Lšœžœžœ˜7šœžœ
žœ
žœ(˜CLš
œ˜—Lšœ	žœžœ
˜'š
œ)˜)Lšœžœ
žœ˜*—L˜Lšžœ
˜Lš
œ˜—š 	œž	œžœ%žœ˜NLš
œ*˜*šœžœ
žœ
žœ ˜CLš
œ
˜
—Lšœžœžœ˜7šœžœ
žœ
žœ(˜CLš
œ˜—Lšœ	žœžœ
˜'š
œ)˜)Lšœžœ
žœ˜*—L˜Lšžœ
˜Lš
œ˜—š œž	œžœ%žœ˜PLš
œ*˜*šœžœ
žœ
žœ ˜CLš
œ
˜
—Lšœžœžœ˜7šœžœ
žœ
žœ(˜ELš
œ!˜!—Lšœžœžœ˜+š
œ)˜)Lšœ žœ
žœ˜,—L˜Lšžœ
˜Lš
œ˜—š œž	œžœ%žœ˜MLš
œ*˜*šœžœ
žœ
žœ ˜CLš
œ
˜
—Lšœžœžœ˜7šœžœ
žœ
žœ(˜BLš
œ˜—Lšœžœžœ˜%š
œ)˜)Lšœžœ
žœ˜)—L˜Lšžœ
˜Lš
œ˜—š 
œž	œžœ%žœ˜OLš
œ*˜*šœžœ
žœ
žœ ˜CLš
œ
˜
—Lšœžœžœ˜7šœ
žœ
žœ
žœ(˜DLš
œ ˜ —Lšœ
žœžœ˜)š
œ)˜)Lšœžœ
žœ˜+—L˜Lšžœ
˜Lš
œ˜—š œž	œžœ%žœ˜PLš
œ*˜*šœžœ
žœ
žœ ˜CLš
œ
˜
—Lšœžœžœ˜7šœžœ
žœ
žœ(˜ELš
œ!˜!—Lšœžœžœ˜+š
œ)˜)Lšœ žœ
žœ˜,—L˜Lšžœ
˜Lš
œ˜—š 	œž	œžœ%žœ˜NLš
œ*˜*šœžœ
žœ
žœ ˜CLš
œ
˜
—Lšœžœžœ˜7šœžœ
žœ
žœ(˜CLš
œ˜—Lšœ	žœžœ
˜'š
œ)˜)Lšœžœ
žœ˜*—L˜Lšžœ
˜Lš
œ˜—š œž	œžœ%žœ™MLš
œ*™*šœžœ
žœ
žœ ™CLš
œ
™
—Lšœžœžœ™7šœžœ
žœ
žœ(™BLš
œ™—Lšœžœžœ™%š
œ)™)Lšœžœ
žœ™)—L™Lšžœ
™Lš
œ™—š 
œž	œžœ%žœ˜OLš
œ*˜*šœžœ
žœ
žœ ˜CLš
œ
˜
—Lšœžœžœ˜7šœ
žœ
žœ
žœ(˜DLš
œ ˜ —Lšœ
žœžœ˜)š
œ)˜)Lšœžœ
žœ˜+—L˜Lšžœ
˜Lš
œ˜—š œž	œžœ%žœ˜PLš
œ*˜*šœžœ
žœ
žœ ˜CLš
œ
˜
—Lšœžœžœ˜7šœžœ
žœ
žœ(˜ELš
œ!˜!—Lšœžœžœ˜+š
œ)˜)Lšœ žœ
žœ˜,—L˜Lšžœ
˜Lš
œ˜—š œž	œžœ%žœ˜PLš
œ*˜*šœžœ
žœ
žœ ˜CLš
œ
˜
—Lšœžœžœ˜7šœžœ
žœ
žœ(˜ELš
œ!˜!—Lšœžœžœ˜+š
œ)˜)Lšœ žœ
žœ˜,—L˜Lšžœ
˜Lš
œ˜—š 
œž	œžœ%žœ˜OLš
œ*˜*šœžœ
žœ
žœ ˜CLš
œ
˜
—Lšœžœžœ˜7šœ
žœ
žœ
žœ(˜DLš
œ ˜ —Lšœ
žœžœ˜)š
œ)˜)Lšœžœ
žœ˜+—L˜Lšžœ
˜Lš
œ˜—š 
œž	œžœ%žœ˜OLš
œ*˜*šœžœ
žœ
žœ ˜CLš
œ
˜
—Lšœžœžœ˜7šœ
žœ
žœ
žœ(˜DLš
œ ˜ —Lšœ
žœžœ˜)š
œ)˜)Lšœžœ
žœ˜+—L˜Lšžœ
˜Lš
œ˜—š 
œž	œžœ%žœ˜OLš
œ*˜*šœžœ
žœ
žœ ˜CLš
œ
˜
—Lšœžœžœ˜7šœ
žœ
žœ
žœ(˜DLš
œ ˜ —Lšœ
žœžœ˜)š
œ)˜)Lšœžœ
žœ˜+—L˜Lšžœ
˜Lš
œ˜—š œž	œžœ%žœ˜PLš
œ*˜*šœžœ
žœ
žœ ˜CLš
œ
˜
—Lšœžœžœ˜7šœžœ
žœ
žœ(˜ELš
œ!˜!—Lšœžœžœ˜+š
œ)˜)Lšœ žœ
žœ˜,—L˜Lšžœ
˜Lš
œ˜—š œž	œžœ%žœ˜PLš
œ*˜*šœžœ
žœ
žœ ˜CLš
œ
˜
—Lšœžœžœ˜7šœžœ
žœ
žœ(˜ELš
œ!˜!—Lšœžœžœ˜+š
œ)˜)Lšœ žœ
žœ˜,—L˜Lšžœ
˜Lš
œ˜—š œž	œžœ%žœ˜PLš
œ*˜*šœžœ
žœ
žœ ˜CLš
œ
˜
—Lšœžœžœ˜7šœžœ
žœ
žœ(˜ELš
œ!˜!—Lšœžœžœ˜+š
œ)˜)Lšœ žœ
žœ˜,—L˜Lšžœ
˜Lš
œ˜—š 	œž	œžœ%žœ˜NLš
œ*˜*šœžœ
žœ
žœ ˜CLš
œ
˜
—Lšœžœžœ˜7šœžœ
žœ
žœ(˜CLš
œ˜—Lšœ	žœžœ
˜'š
œ)˜)Lšœžœ
žœ˜*—L˜Lšžœ
˜Lš
œ˜—š 
œž	œžœ%žœ˜OLš
œ*˜*šœžœ
žœ
žœ ˜CLš
œ
˜
—Lšœžœžœ˜7šœ
žœ
žœ
žœ(˜DLš
œ ˜ —Lšœ
žœžœ˜)š
œ)˜)Lšœžœ
žœ˜+—L˜Lšžœ
˜Lš
œ˜—š 
œž	œžœ%žœ˜OLš
œ*˜*šœžœ
žœ
žœ ˜CLš
œ
˜
—Lšœžœžœ˜7šœ
žœ
žœ
žœ(˜DLš
œ ˜ —Lšœ
žœžœ˜)š
œ)˜)Lšœžœ
žœ˜+—L˜Lšžœ
˜Lš
œ˜—š œž	œžœ%žœ˜PLš
œ*˜*šœžœ
žœ
žœ ˜CLš
œ
˜
—Lšœžœžœ˜7šœžœ
žœ
žœ(˜ELš
œ!˜!—Lšœžœžœ˜+š
œ)˜)Lšœ žœ
žœ˜,—L˜Lšžœ
˜Lš
œ˜—š 	œž	œžœ%žœ™NLš
œ*™*šœžœ
žœ
žœ ™CLš
œ
™
—Lšœžœžœ™7šœžœ
žœ
žœ(™CLš
œ™—Lšœ	žœžœ
™'š
œ)™)Lšœžœ
žœ™*—L™Lšžœ
™Lš
œ™—š 
œž	œžœ%žœ˜OLš
œ*˜*šœžœ
žœ
žœ ˜CLš
œ
˜
—Lšœžœžœ˜7šœ
žœ
žœ
žœ(˜DL˜ —Lšœ
žœžœ˜)š
œ)˜)Lšœžœ
žœ˜+—L˜Lšžœ
˜Lš
œ˜—š œž	œžœ%žœ˜PLš
œ*˜*šœžœ
žœ
žœ ˜CLš
œ
˜
—Lšœžœžœ˜7šœžœ
žœ
žœ(˜EL˜!—Lšœžœžœ˜+š
œ)˜)Lšœ žœ
žœ˜,—L˜Lšžœ
˜Lš
œ˜—š œž	œžœ%žœ˜QLš
œ*˜*šœžœ
žœ
žœ ˜CLš
œ
˜
—Lšœžœžœ˜7šœžœ
žœ
žœ(˜FL˜"—Lšœžœžœ˜-š
œ)˜)Lšœ!žœ
žœ˜-—L˜Lšžœ
˜Lš
œ˜—š 
œž	œžœ%žœ˜OLš
œ*˜*šœžœ
žœ
žœ ˜CLš
œ
˜
—Lšœžœžœ˜7šœ
žœ
žœ
žœ(˜DL˜ —Lšœ
žœžœ˜)š
œ)˜)Lšœžœ
žœ˜+—L˜Lšžœ
˜Lš
œ˜—š œž	œžœ%žœ˜PLš
œ*˜*šœžœ
žœ
žœ ˜CLš
œ
˜
—Lšœžœžœ˜7šœžœ
žœ
žœ(˜EL˜!—Lšœžœžœ˜+š
œ)˜)Lšœ žœ
žœ˜,—L˜Lšžœ
˜Lš
œ˜—š œž	œžœ%žœ˜QLš
œ*˜*šœžœ
žœ
žœ ˜CLš
œ
˜
—Lšœžœžœ˜7šœžœ
žœ
žœ(˜FL˜"—Lšœžœžœ˜-š
œ)˜)Lšœ!žœ
žœ˜-—L˜Lšžœ
˜Lš
œ˜—š 
œž	œžœ%žœ˜OLš
œ*˜*šœžœ
žœ
žœ ˜CLš
œ
˜
—Lšœžœžœ˜7šœ
žœ
žœ
žœ(˜DL˜ —Lšœ
žœžœ˜)š
œ)˜)Lšœžœ
žœ˜+—L˜Lšžœ
˜Lš
œ˜—š 	œž	œžœ%žœ˜NLš
œ*˜*šœžœ
žœ
žœ ˜CLš
œ
˜
—Lšœžœžœ˜7šœžœ
žœ
žœ(˜CL˜—Lšœ	žœžœ
˜'š
œ)˜)Lšœžœ
žœ˜*—L˜Lšžœ
˜Lš
œ˜—š œž	œžœ%žœ˜LLš
œ*˜*šœžœ
žœ
žœ ˜CLš
œ
˜
—Lšœžœžœ˜7šœ
žœ
žœ
žœ(˜ALš
œ˜—Lšœžœžœ˜#š
œ)˜)Lšœžœ
žœ˜(—L˜Lšžœ
˜Lš
œ˜—š œž	œžœ%žœ˜PLš
œ*˜*šœžœ
žœ
žœ ˜CLš
œ
˜
—Lšœžœžœ˜7šœžœ
žœ
žœ(˜ELš
œ!˜!—Lšœžœžœ˜+š
œ)˜)Lšœ žœ
žœ˜,—L˜Lšžœ
˜Lš
œ˜—š œž	œžœ%žœ˜MLš
œ*˜*šœžœ
žœ
žœ ˜CLš
œ
˜
—Lšœžœžœ˜7šœžœ
žœ
žœ(˜BLš
œ˜—Lšœžœžœ˜%š
œ)˜)Lšœžœ
žœ˜)—L˜Lšžœ
˜Lš
œ˜—š œž	œžœ%žœ˜MLš
œ*˜*šœžœ
žœ
žœ ˜CLš
œ
˜
—Lšœžœžœ˜7šœžœ
žœ
žœ(˜BLš
œ˜—Lšœžœžœ˜%š
œ)˜)Lšœžœ
žœ˜)—L˜Lšžœ
˜Lš
œ˜—™L™—š œž	œžœ%žœ˜QLš
œ*˜*šœžœ
žœ
žœ ˜CLš
œ
˜
—Lšœžœžœ˜7šœžœ
žœ
žœ˜5Lš
œ˜—Lšœžœžœ˜-š
œ)˜)Lšœ!žœ
žœ˜-—L˜Lšžœ
˜Lš
œ˜L˜—L™	™šœ'žœ'˜QLš
œ	˜	Lš
œ˜Lš
œ˜———K˜—J˜—…—ŒΪΛS