DR11WFace: CEDAR DEFINITIONS ~ BEGIN Initialize: PROC RETURNS [ok: BOOL]; Finalize: PROC; Ready: PROC RETURNS [ready: BOOL]; Reset: PROC; function1: WORD16 ~ 2; function2: WORD16 ~ 4; function3: WORD16 ~ 8; AddToControl: PROC [flags: WORD16 ¬ 0]; AddToControlOnWrite: PROC [flags: WORD16 ¬ 0]; ClearFromControl: PROC [flags: WORD16 ¬ 0]; ClearFromControlOnWrite: PROC [flags: WORD16 ¬ 0]; SendOneWord: PROC [data: WORD16] RETURNS [ok: BOOL]; BufferAddress: TYPE = LONG POINTER; SendBuffer: PROC [addr: BufferAddress, bytes: CARD] RETURNS [ok: BOOL]; Abort: PROC; END. Œ DR11WFace.mesa Copyright Σ 1989, 1991 by Xerox Corporation. All rights reserved. Dave Rumph, April 17, 1989 1:34:51 am PST PCedar1.2 Face for the Ikon DR11W interface, model 10089. Currently implemented on only on Suns. Do whatever setup is required before the DR11W port can be accessed. Do whatever shutdown is required after the DR11W port access is done. Reset the interface. Add some bits into the control register. See above for some useful ones. Add some bits into the control register. See above for some useful ones. Add some bits into the control register. See above for some useful ones. Add some bits into the control register. See above for some useful ones. Sends one 16-bit word to the interface, and wait for completion. Send bytes-length data starting at addr. It waits 'til the transfer is finished before returning. Try to abort the transfer of data to the interface. Κς–(cedarcode) style•NewlineDelimiter ™code•Mark outsideHeaderšœ™Kšœ Οeœ7™BKšœ)™)K™K™a—K˜KšΠbl œΟkœŸ ˜šœŸ˜K˜šΟn œŸœŸœŸœ˜$K™DK™—š œŸœ˜K™EK™—Kš œŸœŸœ Ÿœ˜"K˜š œŸœ˜ K™K™—Kšœ Ÿœ˜Kšœ Ÿœ˜Kšœ Ÿœ˜K˜š  œŸœ Ÿœ˜'K™I—K˜š œŸœ Ÿœ˜.K™I—K˜š œŸœ Ÿœ˜+K™IK˜—š œŸœ Ÿœ˜2K™IK˜—š   œŸœŸœŸœŸœ˜4K™@K™—šœŸœŸœŸœ˜#K™—š   œŸœŸœŸœŸœ˜GK™bK™—š œŸœ˜ K™3——K˜KšŸœ˜—…—Bΐ