// Hardwired8Line.config -- 8-line configuration for DLSTest
// Last modified June 20, 1982  11:01 AM by Taft

// Syntax of DLS configuration file:
// One or more entries, each terminated by return.
// <entry> ::= <line> <description> | // <comment>
// <line> ::= <octal line number of line being described>
// <description> ::= <attribute> | <description> <attribute>
// <attribute> ::= <lineType> | <controlLine> | <defaultHost> | <baudRate> |
//		<terminalType> | <length> | <width> | <diallerInfo> |
//		<stopBits> | <loopLine> | <otherAttribute>
// <lineType> ::= Unused | Hardwired | DataSet | Telenet |
//		Dialler <diallerSignal>
// <controlLine> ::= Control <line>
// <defaultHost> ::= Host <hostName>
// <baudRate> ::= Baud <decimal number>
// <terminalType> ::= Type <decimal number>	// Tenex terminal type
// <length> ::= Length <decimal number>		// Lines/page
// <width> ::= Width <decimal number>		// Chars/line
// <diallerInfo> ::= DialOut <decimal number> <decimal number>
// <stopBits> ::= Stop 1 | Stop 2
// <loopLine> ::= Loop <line>			// Implemented only in ChollaDLS
// <diallerSignal> ::= CRQ | DP | NB1 | NB2 | NB4 | NB8
// <otherAttribute> ::= DialOutOnly | NoPad

// Each entry must contain a <lineType>, and entries with <lineType> of
// DataSet or Telenet must contain a <ControlLine>.

// If a <baudRate> is specified, the line will run at that fixed rate.
// Normally <baudRate> is omitted, and speed determination is performed
// at connection time.

// Dial-out lines, as well as having a <controlLine> attribute, also
// have a <diallerInfo> attribute with two arguments:
//	Modem address, i.e., Vadic card cage slot number (1-16) in the
//		cage that has the dialler.
//	Modem type: 1 = 103-compatible modem, 0 = other type of modem

// There are 6 lines that control the dialler itself; each is declared by
// a "Dialler <diallerSignal>" entry, where the argument is the name
// of the output signal being controlled.  Some of the lines also have
// input signals connected to them; the correspondence is:
//	output:	CRQ	DP	NB1	NB2	NB4	NB8
//	input:	PND	ACR	DSS	--	--	--

// DialOutOnly means that the line is controlled exclusively from the network
// side; input from the line is ignored when the line is idle.

00 Hardwired
01 Hardwired
02 Hardwired
03 Hardwired
04 Hardwired
05 Hardwired
06 Hardwired
07 Hardwired