[_CD4_]<dragon7.0>SmallCache>Code>SCPmCodeImpl-Of-Dec-2-87.mesa!1

SCPmCodeImpl.mesa

Copyright © 1986 by Xerox Corporation. All rights reserved.

Created: Douady, Sindhu April 10, 1987 12:50:16 pm PDT

Pradeep Sindhu October 27, 1987 12:15:49 pm PST

Cesar Douady May 13, 1987 3:09:46 pm PDT

This module defines the Processor-side microcode. Note that only the combinatorial part is modeled, and that the input, output, and feedback registers are within a higher level block defined by the schematic PCtl.sch.

In writing the microcode, we have made the following assumption about the speed of this combinatorial block: signals can go through the block in under one clock cycle, so that inputs need to come directly from a clocked register, and outputs need to go directly to a clocked register, with no intervening logic. This structure implies that the minimum delay between the microcode asserting a signal, and that signal having an effect on the input, is two cycles. This minimum delay is, in fact, used for the signal PCtlSetNonFBTIP -> NonFBTIP.

DIRECTORY

Core, CoreClasses, CoreCreate, CoreFlat, DynaBusInterface, IO, Ports, Rope, Rosemary, RosemaryUser, SCLogic, SCUtils, TerminalIO;

SCPmCodeImpl: CEDAR PROGRAM

IMPORTS Ports, Rosemary, SCLogic, SCUtils

EXPORTS SCLogic

~ BEGIN OPEN SCLogic;

Type Defs and Constants

IndexType: TYPE = {Label, ReturnAddress, IOAddr};

NumPCmdBits: NAT = 4;

Variable Defs

Microcode Labels

-- Begin Labels

ChkPermPC: NAT = Next[Label];

CP1PC: NAT = Next[Label];

CP2PC: NAT = Next[Label];

CP3PC: NAT = Next[Label];

HandleMissPC: NAT = Next[Label];

HM1PC: NAT = Next[Label];

HM2PC: NAT = Next[Label];

HM3PPC: NAT = Next[Label];

HM3nPPC: NAT = Next[Label];

HM3nRPC: NAT = Next[Label];

HMnMPC: NAT = Next[Label];

HMnM11PC: NAT = Next[Label];

HMnM12PC: NAT = Next[Label];

HMnM2PC: NAT = Next[Label];

HMnM3PC: NAT = Next[Label];

HMnM4PC: NAT = Next[Label];

HMRCamReadyPC: NAT = Next[Label];

HMReadRamPC: NAT = Next[Label];

HMReturn1PC: NAT = Next[Label];

HMReturn2PC: NAT = Next[Label];

HMRR2PC: NAT = Next[Label];

HMRR3PC: NAT = Next[Label];

HMRR4PC: NAT = Next[Label];

HMRR5PC: NAT = Next[Label];

HMRR6PC: NAT = Next[Label];

HMRRCVct2PC: NAT = Next[Label];

HMRRCVct3PC: NAT = Next[Label];

HMRRCVct4PC: NAT = Next[Label];

HMRRCVM3PC: NAT = Next[Label];

HMRRCVM4PC: NAT = Next[Label];

IdlePC: NAT = Next[Label];

IOR2PC: NAT = Next[Label];

IOWritePC: NAT = Next[Label];

PCWS3PC: NAT = Next[Label];

PCWS4PC: NAT = Next[Label];

PCWS5PC: NAT = Next[Label];

PCWS6PC: NAT = Next[Label];

PCWS7PC: NAT = Next[Label];

PCWS8PC: NAT = Next[Label];

PCWS9PC: NAT = Next[Label];

PCWS10PC: NAT = Next[Label];

PCWS11PC: NAT = Next[Label];

PCWS12PC: NAT = Next[Label];

PCWS13PC: NAT = Next[Label];

PCWS14PC: NAT = Next[Label];

PCWS14PrimePC: NAT = Next[Label];

PCWS15PC: NAT = Next[Label];

PCWS16PC: NAT = Next[Label];

PCWS17PC: NAT = Next[Label];

PCWSR2PC: NAT = Next[Label];

PCWSRetryPC: NAT = Next[Label];

PSR2PC: NAT = Next[Label];

PSR2PrimePC: NAT = Next[Label];

PSR3PC: NAT = Next[Label];

PSR4PC: NAT = Next[Label];

PSRetryPC: NAT = Next[Label];

PSRetryPrimePC: NAT = Next[Label];

PSReturn1PC: NAT = Next[Label];

PSReturn2PC: NAT = Next[Label];

PSRCamReadyPC: NAT = Next[Label];

PSRRCVM2PC: NAT = Next[Label];

PSRRCVM3PC: NAT = Next[Label];

PSRRCVM4PC: NAT = Next[Label];

PStorePC: NAT = Next[Label];

ResetPC: NAT = Next[Label];

SBTOF2PC: NAT = Next[Label];

SBTOF3PC: NAT = Next[Label];

SIOAF2PC: NAT = Next[Label];

SIOAF3PC: NAT = Next[Label];

SMAF2PC: NAT = Next[Label];

SMAF3PC: NAT = Next[Label];

StoreBTimeOutFaultPC: NAT = Next[Label];

StoreMemAccessFaultPC: NAT = Next[Label];

StoreIOAccessFaultPC: NAT = Next[Label];

TestReadRamPC: NAT = Next[Label];

TestReadRCamPC: NAT = Next[Label];

TestReadVCamPC: NAT = Next[Label];

TestResetVictimPC: NAT = Next[Label];

TestShiftVictimPC: NAT = Next[Label];

TRR2PC: NAT = Next[Label];

TRR3PC: NAT = Next[Label];

TRV2PC: NAT = Next[Label];

TRRC2PC: NAT = Next[Label];

TRRC3PC: NAT = Next[Label];

TRRC4PC: NAT = Next[Label];

TRRC5PC: NAT = Next[Label];

TRRC6PC: NAT = Next[Label];

TRVC2PC: NAT = Next[Label];

TRVC3PC: NAT = Next[Label];

TRVC4PC: NAT = Next[Label];

TRVC5PC: NAT = Next[Label];

TRVC6PC: NAT = Next[Label];

TSV2PC: NAT = Next[Label];

TSV3PC: NAT = Next[Label];

-- End Labels

MaxPC: NAT = Next[Label];

NumPCBits: PUBLIC NAT ← 1+SCUtils.Log2[MaxPC-1];

Microcode Return Addresses

FromRead: NAT = Next[ReturnAddress];

FromIORead: NAT = FromRead;

FromWrite: NAT = Next[ReturnAddress];

FromIOWrite: NAT = FromWrite;

FromCWS: NAT = Next[ReturnAddress];

MaxStack: NAT = Next[ReturnAddress];

NumStackBits: PUBLIC NAT ← 1+SCUtils.Log2[MaxStack-1];

ABus Source Codes

ABusPAdd: NAT = 0;

ABusRqstBuf: NAT = 1;

ABusVCam: NAT = 4;

-- opCode 5 is forbidden by the hardware

ABusCam: NAT = 6;

ABusRCam: NAT = 7;

ABusIOOld: NAT = 8;

ABusIONew: NAT = 9;

ABusIOAId: NAT = 12;

ABusIOFault: NAT = 13;

ABusFault: NAT = 8;

DBus Source Codes

DBusNoOp: NAT = 0;

DBusPWtLatch: NAT = 1;

DBusRRLatch: NAT = 2;

DBusABus: NAT = 3;

Array Multiplexer Select Codes

SCmdNoOp: NAT = 0;

SCmdLRM: NAT = 1;

SCmdLVM: NAT = 2;

SCmdVictim: NAT = 3;

PCmd Defs

PCmdNoOp: NAT = 7;

PCmdRead: NAT = 8;

PCmdWrite: NAT = 9;

PCmdCWS: NAT = 10;

PCmdDeMap: NAT = 11;

PCmdIORead: NAT = 12;

PCmdIOWrite: NAT = 13;

PCmdBIOWrite: NAT = 15;

BCmd Defs

BCmdBIOW: NAT = ORD[DynaBusInterface.Cmd.BIOWRqst]/2;

BCmdCWS: NAT = ORD[DynaBusInterface.Cmd.CWSRqst]/2;

BCmdDeMap: NAT = ORD[DynaBusInterface.Cmd.DeMapRqst]/2;

BCmdFB: NAT = ORD[DynaBusInterface.Cmd.FBRqst]/2;

BCmdIOR: NAT = ORD[DynaBusInterface.Cmd.IORRqst]/2;

BCmdIOW: NAT = ORD[DynaBusInterface.Cmd.IOWRqst]/2;

BCmdMap: NAT = ORD[DynaBusInterface.Cmd.MapRqst]/2;

BCmdRB: NAT = ORD[DynaBusInterface.Cmd.RBRqst]/2;

BCmdWB: NAT = ORD[DynaBusInterface.Cmd.WBRqst]/2;

BCmdWS: NAT = ORD[DynaBusInterface.Cmd.WSRqst]/2;

Fault Code Defs

FaultMemAccess: NAT = 0;

FaultIOAccess: NAT = 1;

FaultBTimeOut: NAT = 2;

Signal Defs

signals: Signals ← NEW [SignalsRec[100]];

AOw: NAT = Declare[signals, "AOw", X, Input];

ASh: NAT = Declare[signals, "ASh", X, Input];

AVM: NAT = Declare[signals, "AVM", X, Input];

FBTIP: NAT = Declare[signals, "FBTIP", X, Input];

MyBFault: NAT = Declare[signals, "MyBFault", X, Input];

NonFBTIP: NAT = Declare[signals, "NonFBTIP", X, Input];

PAccessPermission: NAT = Declare[signals, "PAccessPermission", X, Input];

PCmd: NAT = DeclareS[signals, "PCmd", NumPCmdBits, Xs, Input];

PCWSEq: NAT = Declare[signals, "PCWSEq", X, Input];

RamForP: NAT = Declare[signals, "RamForP", X, Input];

RCamForP: NAT = Declare[signals, "RCamForP", X, Input];

RPValid: NAT = Declare[signals, "RPValid", X, Input];

TimeOut: NAT = Declare[signals, "TimeOut", X, Input];

PC: NAT = DeclareS[signals, "PC", NumPCBits, Xs, Input];

Stack: NAT = DeclareS[signals, "Stack", NumStackBits, Xs, Input];

Reset: NAT = Declare[signals, "Reset", X, Input];

PCtlABusCmd: NAT = DeclareS[signals, "PCtlABusCmd", 4, ABusPAdd, Output];

PCtlBCmd: NAT = DeclareS[signals, "PCtlBCmd", 4, Xs, Output];

PCtlBusy: NAT = Declare[signals, "PCtlBusy", H, Output];

PCtlCSCmd: NAT = DeclareS[signals, "PCtlCSCmd", 2, SCmdNoOp, Output];

PCtlDBusCmd: NAT = DeclareS[signals, "PCtlDBusCmd", 2, DBusNoOp, Output];

PCtlEnCamSel: NAT = Declare[signals, "PCtlEnCamSel", L, Output];

PCtlEnCamSelExt: NAT = Declare[signals, "PCtlEnCamSelExt", L, Output];

PCtlFault: NAT = Declare[signals, "PCtlFault", L, Output];

PCtlFaultCode: NAT = DeclareS[signals, "PCtlFaultCode", 3, 0, Output];

PCtlFlagsForB: NAT = Declare[signals, "PCtlFlagsForB", L, Output];

PCtlForceWordAddress: NAT = Declare[signals, "PCtlForceWordAddress", L, Output];

PCtlPartFMch: NAT = Declare[signals, "PCtlPartFMch", L, Output];

PCtlFrzVictim: NAT = Declare[signals, "PCtlFrzVictim", L, Output];

PCtlLdFIFO: NAT = Declare[signals, "PCtlLdFIFO", L, Output];

PCtlLdRBufDataLo: NAT = Declare[signals, "PCtlLdRBufDataLo", L, Output];

PCtlLdRBufDataHi: NAT = Declare[signals, "PCtlLdRBufDataHi", L, Output];

PCtlLdRBufHeader: NAT = Declare[signals, "PCtlLdRBufHeader", L, Output];

PCtlLdSnooper: NAT = Declare[signals, "PCtlLdSnooper", L, Output];

PCtlPartVMch: NAT = Declare[signals, "PCtlPartVMch", L, Output];

PCtlRdRam: NAT = Declare[signals, "PCtlRdRam", L, Output];

PCtlRdRCam: NAT = Declare[signals, "PCtlRdRCam", L, Output];

PCtlRdVCam: NAT = Declare[signals, "PCtlRdVCam", L, Output];

PCtlReleaseP: NAT = Declare[signals, "PCtlReleaseP", L, Output];

PCtlResetVictim: NAT = Declare[signals, "PCtlResetVictim", L, Output];

PCtlRSCmd: NAT = DeclareS[signals, "PCtlRSCmd", 2, SCmdNoOp, Output];

PCtlSelBFC: NAT = Declare[signals, "PCtlSelBFC", L, Output];

PCtlSelRplyData: NAT = Declare[signals, "PCtlSelRplyData", L, Output];

PCtlSetFBTIP: NAT = Declare[signals, "PCtlSetFBTIP", L, Output];

PCtlSetNonFBTIP: NAT = Declare[signals, "PCtlSetNonFBTIP", L, Output];

PCtlSetSnooperValid: NAT = Declare[signals, "PCtlSetSnooperValid", L, Output];

PCtlShftVictim: NAT = Declare[signals, "PCtlShftVictim", L, Output];

PCtlWtMchVCam: NAT = Declare[signals, "PCtlWtMchVCam", L, Output];

PCtlWtRam: NAT = Declare[signals, "PCtlWtRam", L, Output];

NxtPC: NAT = DeclareS[signals, "NxtPC", NumPCBits, Xs, Output ];

NxtStack: NAT = DeclareS[signals, "NxtStack", NumStackBits, Xs, Output];

Push: NAT = Declare[signals, "Push", L, Output];

Vdd: NAT = Declare[signals, "Vdd", X, Power];

Gnd: NAT = Declare[signals, "Gnd", X, Power];

Public Procs

SCPmCode: PUBLIC PROC [] RETURNS [ct: CellType] = {

ct ← Create[pmCodeName, signals]

};

Internal Procs

Init: Rosemary.InitProc = {

};

Simple: Rosemary.EvalProc = {

v: PROC [ix: NAT] RETURNS [BOOL] = {

level: Level ← p[signals[ix].index].l;

IF level=X THEN ERROR ELSE RETURN[level=H]

};

vs: PROC [ix: NAT] RETURNS [NAT] = {

RETURN[Ports.LSToLC[p[signals[ix].index].ls]]

};

s: PROC [ix: NAT, l: Level] = {

p[signals[ix].index].l ← l

};

ss: PROC [ix: NAT, c: CARD] = {

IF c=Xs

THEN Ports.SetLS[p[signals[ix].index].ls, X]

ELSE Ports.LCToLS[c, p[signals[ix].index].ls];

};

This corresponds to the ReadRCam command cycle

ReadRCam1: PROC [sCmd: NAT] = {

s[PCtlRdRCam, H];

s[PCtlEnCamSel, H];

s[PCtlEnCamSelExt, L];

};

This corresponds to the first cycle of RCam use

ReadRCam2: PROC [sCmd: NAT] = {

s[PCtlRdRCam, H];

s[PCtlEnCamSel, H];

s[PCtlEnCamSelExt, L];

ss[PCtlCSCmd, sCmd];

};

This corresponds to the second and third cycles of RCam use (note they are the same)

ReadRCam34: PROC [sCmd: NAT] = {

ss[PCtlCSCmd, sCmd];

};

This corresponds to the ReadVCam command cycle

ReadVCam1: PROC [sCmd: NAT] = {

s[PCtlRdVCam, H];

s[PCtlEnCamSel, H];

s[PCtlEnCamSelExt, L];

};

This corresponds to the first cycle of VCam use

ReadVCam2: PROC [sCmd: NAT] = {

s[PCtlRdVCam, H];

s[PCtlEnCamSel, H];

s[PCtlEnCamSelExt, L];

ss[PCtlCSCmd, sCmd];

};

This corresponds to the second and third cycles of VCam use (note they are the same)

ReadVCam34: PROC [sCmd: NAT] = {

ss[PCtlCSCmd, sCmd];

};

This corresponds to the ReadRam command cycle

ReadRam1: PROC [sCmd: NAT, drDBus: {DBus, NoDBus} ← DBus] = {

ss[PCtlRSCmd, sCmd];

s[PCtlRdRam, H];

};

This corresponds to the first cycle of Ram use (note that ReadRam2 must follow ReadRam1

ReadRam2: PROC [sCmd: NAT, drDBus: {DBus, NoDBus} ← DBus] = {

ss[PCtlRSCmd, sCmd];

IF drDBus = DBus THEN ss[PCtlDBusCmd, DBusRRLatch];

};

This corresponds to the second cycle of Ram use

ReadRam3: PROC [sCmd: NAT, drDBus: {DBus, NoDBus} ← DBus] = {

IF drDBus = DBus THEN ss[PCtlDBusCmd, DBusRRLatch];

};

This corresponds to the WriteRam command cycle

WriteRam1: PROC [sCmd: NAT, data: NAT] = {

ss[PCtlRSCmd, sCmd];

s[PCtlWtRam, H];

};

This corresponds to the first cycle of Ram use (note that WriteRam2 must follow ReadRam1

WriteRam2: PROC [sCmd: NAT, data: NAT] = {

ss[PCtlRSCmd, sCmd];

ss[PCtlDBusCmd, data];

};

This corresponds to the second cycle of Ram use

WriteRam3: PROC [sCmd: NAT, data: NAT] = {

ss[PCtlDBusCmd, data];

};

Jmp: PROC [dest: NAT] = {

IF dest=StoreBTimeOutFaultPC OR

dest=StoreMemAccessFaultPC OR

dest=StoreIOAccessFaultPC THEN {

ss[PCtlABusCmd, ABusIOFault];

s[PCtlWtMchVCam, H];

};

IF dest=IdlePC THEN {

s[PCtlBusy, L];

s[PCtlLdRBufDataLo, H]; -- to make WriteSingle (shared) go faster

ss[PCtlDBusCmd, DBusPWtLatch];

};

ss[NxtPC, dest];

};

OutputsToDefault[p, signals];

The microcode

SELECT p[signals[Reset].index].l FROM

= X => {OutputsToX[p, signals]; RETURN};

= H => {

s[Push, H]; ss[NxtStack, FromRead]; Jmp[ResetPC]

};

= L => {

SELECT vs[PC] FROM -- Begin Transitions

= ResetPC => {

IF TRUE THEN {

Initiate Reset sequence: (empty for now)

Jmp[IdlePC];

};

};

= IdlePC => {

SELECT vs[PCmd] FROM

<= PCmdNoOp => {

Wait for something to happen

Jmp[IdlePC];

};

= PCmdRead => {

IF v[AVM] THEN {

A hit: Everything is done automatically

Jmp[IdlePC];

};

IF NOT v[AVM] THEN {

A miss: Do partial virtual match to find translation

s[PCtlPartVMch , H];

s[PCtlWtMchVCam, H];

s[Push, H];

ss[NxtStack, FromRead];

Jmp[HandleMissPC];

};

};

= PCmdWrite => {

IF v[AVM] THEN {

A hit: Check if shared bit is set; Wait for ASh to be available

Jmp[PStorePC];

};

IF NOT v[AVM] THEN {

A miss: Do partial virtual match to find translation

s[PCtlPartVMch, H];

s[PCtlWtMchVCam, H];

s[Push, H];

ss[NxtStack, FromWrite];

Jmp[HandleMissPC];

};

};

= PCmdCWS => {

IF v[AVM] THEN {

A hit: Good, get the old value

ss[PCtlABusCmd, ABusIOOld];

s[PCtlWtMchVCam, H];

Jmp[PCWS3PC];

};

IF NOT v[AVM] THEN {

A miss: Do partial virtual match to find translation

s[PCtlPartVMch , H];

s[PCtlWtMchVCam, H];

s[Push, H];

ss[NxtStack, FromCWS];

Jmp[HandleMissPC];

};

};

= PCmdIORead => {

IF v[AVM] THEN {

A hit: Everything is done automatically

Jmp[IdlePC];

};

IF NOT v[AVM] THEN {

A miss: Check if we have access permission; First match without flags

s[PCtlPartFMch , H];

s[PCtlWtMchVCam, H];

s[Push, H];

ss[NxtStack, FromIORead];

Jmp[ChkPermPC];

};

};

= PCmdIOWrite => {

IF v[AVM] THEN {

A hit: Everything is done automatically

Jmp[IdlePC];

};

IF NOT v[AVM] THEN {

A miss: Check if we have access permission; First match without flags

s[PCtlPartFMch , H];

s[PCtlWtMchVCam, H];

s[Push, H];

ss[NxtStack, FromIOWrite];

Jmp[ChkPermPC];

};

};

= PCmdBIOWrite => {

IF TRUE THEN {

This operation always misses: Load RqstBuf header with IO address; Send ArbRequest; Set NonFBTIP (continuation is the same as IOWrite)

s[PCtlLdRBufHeader, H];

s[PCtlSetNonFBTIP, H];

ss[PCtlBCmd, BCmdBIOW];

ss[PCtlABusCmd, ABusPAdd];

Jmp[PSReturn1PC];

};

};

= PCmdDeMap => {

IF TRUE THEN {

This operation always misses: Load RqstBuf header with IO address; Send ArbRequest; Set NonFBTIP (continuation is the same as IOWrite)

s[PCtlLdRBufHeader, H];

s[PCtlSetNonFBTIP, H];

ss[PCtlBCmd, BCmdDeMap];

ss[PCtlABusCmd, ABusPAdd];

Jmp[PSReturn1PC];

};

};

ENDCASE => ERROR;

};

= ChkPermPC => {

IF TRUE THEN {

Wait virtual match w/o flags to complete, 1 of 3

Jmp[CP1PC];

};

};

= CP1PC => {

IF TRUE THEN {

Wait virtual match w/o flags to complete, 2 of 3

Jmp[CP2PC];

};

};

= CP2PC => {

IF TRUE THEN {

Wait virtual match w/o flags to complete, 3 of 3

Jmp[CP3PC];

};

};

= CP3PC => {

IF v[AVM] THEN {

Partial match successful: an IO access permission fault, store it and return

Jmp[StoreIOAccessFaultPC];

};

IF NOT v[AVM] THEN {

A miss. Generate IO(Read/Write) Rqst packet: Load RqstBuf header with IO address; Load RqstBuf data with PData (doesn't hurt for read); Send ArbRqst; Set NonFBTIP; Return when transaction completes (same as PS)

ss[PCtlABusCmd, ABusPAdd];

s[PCtlLdRBufHeader, H];

ss[PCtlDBusCmd, DBusPWtLatch];

s[PCtlLdRBufDataLo, H];

s[PCtlLdRBufDataHi, H];

s[PCtlSetNonFBTIP, H];

Jmp[PSReturn1PC];

SELECT vs[Stack] FROM

=FromIORead => {

Generate IOReadRqst

ss[PCtlBCmd, BCmdIOR];

};

= FromIOWrite => {

Generate IOWriteRqst

ss[PCtlBCmd, BCmdIOW];

};

ENDCASE => ERROR;

};

};

= IOR2PC => {

IF v[NonFBTIP] AND NOT v[TimeOut] THEN {

Wait for reply to come back

Jmp[IOR2PC];

};

IF v[NonFBTIP] AND v[TimeOut] THEN {

A timeOut: Signal and store in the array (can be done after releasing processor)

Jmp[StoreBTimeOutFaultPC];

};

IF NOT v[NonFBTIP] AND v[MyBFault] THEN {

Reply came back with a fault, release processor and return

s[PCtlFault, H];

s[PCtlSelBFC, H];

s[PCtlReleaseP, H];

Jmp[IdlePC];

};

IF NOT v[NonFBTIP] AND NOT v[MyBFault] THEN {

Reply came back normally, release processor and return

s[PCtlReleaseP, H];

Jmp[IdlePC];

};

};

= PCWSRetryPC => {

IF TRUE THEN {

Wait for AVM, 1 of 3: Don't need Ram value, just want to verify a hit

Jmp[PCWSR2PC];

};

};

= PCWSR2PC => {

IF TRUE THEN {

Wait for AVM, 2 of 3

ss[PCtlABusCmd, ABusIOOld];

s[PCtlWtMchVCam, H];

Jmp[PCWS3PC];

};

};

= PCWS3PC => {

IF TRUE THEN {

Wait for AVM, 3 of 3: Read Ram to get the old value

ReadRam1[SCmdLVM];

Jmp[PCWS4PC];

};

};

= PCWS4PC => {

IF v[AVM] THEN {

A hit: Wait for PCWSEq, 1 of 3; (Can't let the processor go, sample value may be wrong)

ReadRam2[SCmdLVM];

Jmp[PCWS5PC];

};

IF NOT v[AVM] THEN {

A miss: Do partial virtual match to find translation

ReadRam2[SCmdLVM];

s[PCtlPartVMch, H];

s[PCtlWtMchVCam, H];

s[Push, H];

ss[NxtStack, FromCWS];

Jmp[HandleMissPC];

};

};

= PCWS5PC => {

IF v[RamForP] THEN {

Wait for PCWSEq, 2 of 3: Compare old and sample; Put old in RqstBuf in case shared is set

s[PCtlLdRBufDataHi, H];

ReadRam3[SCmdLVM];

Jmp[PCWS6PC];

};

IF NOT v[RamForP] THEN {

Ratted! Just redo it: Read Ram to get the old value

ReadRam1[SCmdLVM];

Jmp[PCWS4PC];

};

};

= PCWS6PC => {

IF TRUE THEN {

Wait for PCWSEq, 3 of 3

Jmp[PCWS7PC];

};

};

= PCWS7PC => {

IF v[PCWSEq] THEN {

Read new value from the Ram, present IOAddress to VCam

ss[PCtlABusCmd, ABusIONew];

s[PCtlWtMchVCam, H];

Jmp[PCWS8PC];

};

IF NOT v[PCWSEq] THEN {

Not equal: Don't need to do anything

Jmp[IdlePC];

};

};

= PCWS8PC => {

IF TRUE THEN {

Read new value from the Ram, send ReadRam pulse

ReadRam1[SCmdLVM];

Jmp[PCWS9PC];

};

};

= PCWS9PC => {

IF TRUE THEN {

Wait for data to appear in RRdLatch, 1 of 2

ReadRam2[SCmdLVM];

ss[PCtlABusCmd, ABusPAdd];

s[PCtlWtMchVCam, H];

Jmp[PCWS10PC];

};

};

= PCWS10PC => {

IF v[RamForP] THEN {

Wait for data to appear in RRdLatch, 2 of 2: Start writing new data back; Load Rqst Buffer with new value in case shared bit is set

ReadRam3[SCmdLVM];

WriteRam1[SCmdLVM, DBusRRLatch];

Jmp[PCWS11PC];

};

IF NOT v[RamForP] THEN {

Ratted! Re-read new value from scrtach; Present IOAddress to VCam

ss[PCtlABusCmd, ABusIONew];

s[PCtlWtMchVCam, H];

Jmp[PCWS8PC];

};

};

= PCWS11PC => {

IF TRUE THEN {

Select RamReadLatch to go to the Ram, 1 of 2

Wait for Ash, 1 of 3

WriteRam2[SCmdLVM, DBusRRLatch];

Jmp[PCWS12PC];

};

};

= PCWS12PC => {

IF v[RamForP] THEN {

Select RamReadLatch to go to the Ram, 2 of 2; Wait for Ash, 2 of 3; Start RCam read in case of ASh

WriteRam3[SCmdLVM, DBusRRLatch];

s[PCtlWtMchVCam, H];

ss[PCtlABusCmd, ABusPAdd];

Jmp[PCWS13PC];

};

IF NOT v[RamForP] THEN {

Ratted! Re-read the new value from scratch; Present IOAddress to VCam

ss[PCtlABusCmd, ABusIONew];

s[PCtlWtMchVCam, H];

Jmp[PCWS8PC];

};

};

= PCWS13PC => {

IF TRUE THEN {

Wait for Ash, 3 of 3; Read RCam, cycle 1

ReadRCam1[SCmdLVM];

Jmp[PCWS14PC];

};

};

= PCWS14PC => {

IF v[ASh] AND v[RCamForP] THEN {

Data is shared, generate CWSRqst; Read RCam to get real address, cycle 2

ReadRCam2[SCmdLVM];

Jmp[PCWS15PC];

};

IF v[ASh] AND NOT v[RCamForP] THEN {

Don't have RCam; Read RCam to get real address, cycle 1

ReadRCam1[SCmdLVM];

Jmp[PCWS14PrimePC];

};

IF NOT v[ASh] THEN {

Data is not shared, we are done

s[PCtlReleaseP, H];

Jmp[IdlePC];

};

};

= PCWS14PrimePC => {

IF v[RCamForP] THEN {

First, read RCam to get the real address, cycle 2

ReadRCam2[SCmdLVM];

Jmp[PCWS15PC];

};

IF NOT v[RCamForP] THEN {

First, read RCam to get the real address, cycle 1

ReadRCam1[SCmdLVM];

Jmp[PCWS14PrimePC];

};

};

= PCWS15PC => {

IF v[RCamForP] THEN {

Read RCam, cycle 3; We have the RCam, go to next cycle

ReadRCam34[SCmdLVM];

Jmp[PCWS16PC];

};

IF NOT v[RCamForP] THEN {

Read RCam, cycle 1; We don't have the RCam, return to cycle 2

ReadRCam1[SCmdLVM];

Jmp[PCWS14PrimePC];

};

};

= PCWS16PC => {

IF v[RCamForP] THEN {

Read RCam, cycle 4; RCam has been read; Send ArbRqst; Set NonFBTIP

s[PCtlSetNonFBTIP, H];

ReadRCam34[SCmdLVM];

Jmp[PCWS17PC];

};

IF NOT v[RCamForP] THEN {

Read RCam, cycle 1; We don't have the RCam, return to cycle 2

ReadRCam1[SCmdLVM];

Jmp[PCWS14PrimePC];

};

};

= PCWS17PC => {

IF TRUE THEN {

Load RqstBuf header with real address

s[PCtlLdRBufHeader, H];

ss[PCtlBCmd, BCmdCWS];

ss[PCtlABusCmd, ABusCam];

Jmp[PSReturn2PC];

};

};

= PSRetryPC => {

IF TRUE THEN {

Wait for AVM, 1 of 3; Write Ram in case of a match

WriteRam1[SCmdLVM, DBusPWtLatch];

Jmp[PSR2PC];

};

};

= PSR2PrimePC => {

IF v[AVM] THEN {

Wait for time to pass

WriteRam2[SCmdLVM, DBusPWtLatch];

Jmp[PSR3PC];

};

IF NOT v[AVM] THEN {

A miss: Do partial virtual match to find translation

s[PCtlPartVMch, H];

s[PCtlWtMchVCam, H];

s[Push, H];

ss[NxtStack, FromWrite];

Jmp[HandleMissPC];

};

};

= PSR2PC => {

IF TRUE THEN {

Wait for AVM, 2 of 3

WriteRam2[SCmdLVM, DBusPWtLatch];

Jmp[PSR3PC];

};

};

= PSR3PC => {

IF v[RamForP] THEN {

Wait for AVM, 3 of 3

WriteRam3[SCmdLVM, DBusPWtLatch];

Jmp[PSR4PC];

};

IF NOT v[RamForP] THEN {

Ratted! Just redo it; Write the Ram in case of a match

WriteRam1[SCmdLVM, DBusPWtLatch];

Jmp[PSR2PrimePC];

};

};

= PSR4PC => {

IF v[AVM] THEN {

A hit: Check for shared bit; Wait for ASh to be available

Jmp[PStorePC];

};

IF NOT v[AVM] THEN {

A miss: Do partial virtual match to find translation

s[PCtlPartVMch, H];

s[PCtlWtMchVCam, H];

s[Push, H];

ss[NxtStack, FromWrite];

Jmp[HandleMissPC];

};

};

= PStorePC => {

IF v[ASh] THEN {

Data is shared, generate WSRqst; Read RCam to get the real address

ReadRCam1[SCmdLVM];

Jmp[PSRRCVM2PC];

};

IF NOT v[ASh] THEN {

Data is not shared, everything is done automatically: Release processor

s[PCtlReleaseP, H];

Jmp[IdlePC];

};

};

= PSRRCVM2PC => {

IF v[RCamForP] THEN {

Read RCam, cycle 2: We have RCam, go to next cycle

ReadRCam2[SCmdLVM];

Jmp[PSRRCVM3PC];

};

IF NOT v[RCamForP] THEN {

Read RCam, cycle 1: We don't have RCam, return to cycle 2

ReadRCam1[SCmdLVM];

Jmp[PSRRCVM2PC];

};

};

= PSRRCVM3PC => {

IF v[RCamForP] THEN {

Read RCam, cycle 3: We have RCam, go to next cycle

ReadRCam34[SCmdLVM];

Jmp[PSRRCVM4PC];

};

IF NOT v[RCamForP] THEN {

Read RCam, cycle 1: We don't have RCam, return to cycle 2

ReadRCam1[SCmdLVM];

Jmp[PSRRCVM2PC];

};

};

= PSRRCVM4PC => {

IF v[RCamForP] THEN {

Read RCam, cycle 4: RCam has been read; Send ArbRqst; Set NonFBTIP

s[PCtlSetNonFBTIP, H];

ReadRCam34[SCmdLVM];

Jmp[PSRCamReadyPC];

};

IF NOT v[RCamForP] THEN {

Read RCam, cycle 1: We don't have RCam, return to cycle 2

ReadRCam1[SCmdLVM];

Jmp[PSRRCVM2PC];

};

};

= PSRCamReadyPC => {

IF TRUE THEN {

Load Rqst buffer header with real address

s[PCtlLdRBufHeader, H];

ss[PCtlBCmd, BCmdWS];

ss[PCtlABusCmd, ABusCam];

Jmp[PSReturn2PC];

};

};

= PSReturn1PC => {

Blow one cycle to give NonFBTIP time to be set

IF TRUE THEN {

Jmp[PSReturn2PC];

};

};

= PSReturn2PC => {

IF v[NonFBTIP] AND NOT v[TimeOut] THEN {

Wait for WSRply, IOWRply, IORRply, BIOWRply, DeMapRply

s[PCtlSelRplyData, H];

Jmp[PSReturn2PC];

};

IF v[NonFBTIP] AND v[TimeOut] THEN {

A timeOut: Signal and return

s[PCtlSelRplyData, H];

Jmp[StoreBTimeOutFaultPC];

};

IF NOT v[NonFBTIP] AND v[MyBFault] THEN {

WSRply has come back with a fault, release processor and return

s[PCtlFault, H];

s[PCtlSelBFC, H];

s[PCtlReleaseP, H];

s[PCtlSelRplyData, H];

Jmp[IdlePC];

};

IF NOT v[NonFBTIP] AND NOT v[MyBFault] THEN {

Reply has come back, release processor and return

s[PCtlReleaseP, H];

s[PCtlSelRplyData, H];

Jmp[IdlePC];

};

};

= HandleMissPC => {

IF TRUE THEN {

Wait for partial virtual match, 1 of 3: (Could begin the RCam read here at the expense of (~6) more lines) Freeze victim, Cycle 1 of 2

s[PCtlFrzVictim, H];

Jmp[HM1PC];

};

};

Note: The index i in HMiPC refers to time, not cycle number

= HM1PC => {

IF TRUE THEN {

Wait for partial virtual match, 2 of 3: Initiate RCam read in case partial match succeeds, Read RCam cycle 1; Freeze victim, Cycle 2 of 2

ReadRCam1[SCmdLVM];

s[PCtlFrzVictim, H];

Jmp[HM2PC];

};

};

= HM2PC => {

IF v[RCamForP] THEN {

Wait for partial virtual match, 3 of 3; Read RCam, cycle 2

ReadRCam2[SCmdLVM];

Jmp[HM3PPC];

};

IF NOT v[RCamForP] THEN {

Wait for partial virtual match, 3 of 3; Don't have RCam, Read RCam, cycle 1

ReadRCam1[SCmdLVM];

Jmp[HM3nPPC];

};

};

= HM3PPC => {

IF v[AVM] AND v[RCamForP] THEN {

Partial virtual match is successful; Read RCam, cycle 3

ReadRCam34[SCmdLVM];

Jmp[HMRRCVM4PC];

};

IF v[AVM] AND NOT v[RCamForP] THEN {

Partial virtual match is successful; Don't have RCam, Read RCam, cycle 1

ReadRCam1[SCmdLVM];

Jmp[HM3nPPC];

};

IF NOT v[AVM] THEN {

Read AId from the Ram, first find it in the VCam

ss[PCtlABusCmd, ABusIOAId];

s[PCtlWtMchVCam, H];

Jmp[HMnMPC];

};

};

= HMnMPC => {

IF TRUE THEN {

Read AId from Ram, cycle 1; Load RqstBuf with MapRqst|myId|PAdd; Set NonFBTIP

s[PCtlLdRBufHeader, H];

ss[PCtlBCmd, BCmdMap];

ss[PCtlABusCmd, ABusPAdd];

ReadRam1[SCmdLVM];

Jmp[HMnM11PC];

};

};

= HMnM11PC => {

IF TRUE THEN {

Read AId from Ram, cycle 2; Wait for AId to appear in the RRdLatch, 1 of 1

ReadRam2[SCmdLVM];

Jmp[HMnM12PC];

};

};

= HMnM12PC => {

IF v[RamForP] THEN {

Load RBufLo with AId, RBufHi with garbage; Send ArbRqst

s[PCtlSetNonFBTIP, H];

s[PCtlLdRBufDataLo, H];

s[PCtlLdRBufDataHi, H];

ReadRam3[SCmdLVM];

Jmp[HMnM3PC];

};

IF NOT v[RamForP] THEN {

Ratted, didn't have Ram! Just redo it

ReadRam1[SCmdLVM];

Jmp[HMnM11PC];

};

};

= HMnM3PC => {

Blow one cycle to let NonFBTIP get set

IF TRUE THEN {

Jmp[HMnM4PC];

};

};

= HMnM4PC => {

IF v[NonFBTIP] AND NOT v[TimeOut] THEN {

Wait for MapRply to come back

s[PCtlFlagsForB, H];

Jmp[HMnM4PC];

};

IF v[NonFBTIP] AND v[TimeOut] THEN {

TimeOut : Signal and store the fault in the array

Jmp[StoreBTimeOutFaultPC];

};

IF NOT v[NonFBTIP] AND v[MyBFault] THEN {

MapCache fault: abort access

s[PCtlFault, H];

s[PCtlSelBFC, H];

s[PCtlReleaseP, H];

Jmp[IdlePC];

};

IF NOT v[NonFBTIP] AND NOT v[MyBFault] THEN {

Load Rqst buffer header with RealAddress; Read RCam using victim, cycle 1

s[PCtlLdRBufHeader, H];

ss[PCtlBCmd, BCmdRB];

ss[PCtlABusCmd, ABusCam];

ReadRCam1[SCmdVictim];

Jmp[HMRRCVct2PC];

};

};

For all jumps to this location except the one from HM2PC, we know that the AVM check will succeed since match is latched, and AVM was high earlier. Doing the check in all cases allows us to share this instruction, thereby eliminating waste.

= HM3nPPC => {

IF v[AVM] AND v[RCamForP] THEN {

Partial virtual match is successful; Read RCam, cycle 2

ReadRCam2[SCmdLVM];

Jmp[HMRRCVM3PC];

};

IF v[AVM] AND NOT v[RCamForP] THEN {

Partial virtual match is successful; Didn't have RCam, Read RCam, cycle 1

ReadRCam1[SCmdLVM];

Jmp[HM3nPPC];

};

IF NOT v[AVM] THEN {

Read AId from the Ram, first find it in the VCam

ss[PCtlABusCmd, ABusIOAId];

s[PCtlWtMchVCam, H];

Jmp[HMnMPC];

};

};

= HMRRCVM3PC => {

IF v[RCamForP] THEN {

Read RCam, cycle 3

ReadRCam34[SCmdLVM];

Jmp[HMRRCVM4PC];

};

IF NOT v[RCamForP] THEN {

Read RCam, cycle 1; Didn't have RCam, redo read

ReadRCam1[SCmdLVM];

Jmp[HM3nPPC];

};

};

= HMRRCVM4PC => {

IF v[RCamForP] THEN {

Read RCam, cycle 4; RCam has been read

ReadRCam34[SCmdLVM];

Jmp[HMRCamReadyPC];

};

IF NOT v[RCamForP] THEN {

Read RCam, cycle 1; Didn't have RCam, redo read

ReadRCam1[SCmdLVM];

Jmp[HM3nPPC];

};

};

We've read RPage from the RCam successfully

= HMRCamReadyPC => {

IF v[PAccessPermission] THEN {

Load RqstBuf header with RealAddress; Read RCam using victim, cycle 1

s[PCtlLdRBufHeader, H];

ss[PCtlBCmd, BCmdRB];

ss[PCtlABusCmd, ABusCam];

ReadRCam1[SCmdVictim];

Jmp[HMRRCVct2PC];

};

IF NOT v[PAccessPermission] THEN {

Fault: Signal and store in the array (can be done after releasing processor)

Jmp[StoreMemAccessFaultPC];

};

};

= HMRRCVct2PC => {

IF v[RCamForP] THEN {

Read RCam using victim, cycle 2

ReadRCam2[SCmdVictim];

Jmp[HMRRCVct3PC];

};

IF NOT v[RCamForP] THEN {

Read RCam, cycle 1; Didn't have RCam, return to cycle 2

ReadRCam1[SCmdVictim];

Jmp[HMRRCVct2PC];

};

};

= HMRRCVct3PC => {

IF v[RCamForP] THEN {

Read RCam using victim, cycle 3

ReadRCam34[SCmdVictim];

Jmp[HMRRCVct4PC];

};

IF NOT v[RCamForP] THEN {

Read RCam, cycle 1; Didn't have RCam, return to cycle 2

ReadRCam1[SCmdVictim];

Jmp[HMRRCVct2PC];

};

};

= HMRRCVct4PC => {

IF v[RCamForP] THEN {

Read RCam using victim, cycle 4

ReadRCam34[SCmdVictim];

Jmp[HMReadRamPC];

};

IF NOT v[RCamForP] THEN {

Read RCam, cycle 1; Didn't have RCam, return to cycle 2

ReadRCam1[SCmdVictim];

Jmp[HMRRCVct2PC];

};

};

= HMReadRamPC => {

IF TRUE THEN {

Drive victim address onto ABus and load Snooper in case of FlushBlock; Set snooper valid to begin snooping now; Note that ABus contents automatically go into AToDPipe Reg

ReadRam1[SCmdVictim, NoDBus];

ss[PCtlABusCmd, ABusRCam];

s[PCtlLdSnooper, H];

s[PCtlSetSnooperValid, H];

Jmp[HMRR2PC];

};

};

= HMRR2PC => {

IF TRUE THEN {

Load RqstBufLo with victim address in AToDPipe; Load RqstBufHi with garbage; Wait for AOw; Read Ram cycle 2

ReadRam2[SCmdVictim, NoDBus];

ss[PCtlDBusCmd, DBusABus];

s[PCtlLdRBufDataLo, H];

s[PCtlLdRBufDataHi, H];

Jmp[HMRR3PC];

};

};

= HMRR3PC => {

IF v[RamForP] THEN {

Wait for AOw; Read Ram, cycle 3

ReadRam3[SCmdVictim, NoDBus];

Jmp[HMRR4PC];

};

IF NOT v[RamForP] THEN {

Redo Ram Read; Also redrive victim address onto ABus so AToDPipe gets loaded again, and so we can test RPValid

ReadRam1[SCmdVictim, NoDBus];

ss[PCtlABusCmd, ABusRCam];

Jmp[HMRR2PC];

};

};

= HMRR4PC => {

IF TRUE THEN {

Wait for AOw. Read Ram, cycle 4

Jmp[HMRR5PC];

};

};

RPValid is on the ABus only while the Victim address is being read. Thus think about doing the RPValid check there. Also, it looks as though the ABus is not driven properly when the victim address is read.

= HMRR5PC => {

IF v[AOw] AND v[RPValid] THEN {

Generate FBRqst

ss[PCtlBCmd, BCmdFB];

ss[PCtlABusCmd, ABusRCam];

s[PCtlSetFBTIP, H];

s[PCtlLdFIFO, H];

Jmp[HMRR6PC];

};

IF NOT v[AOw] THEN {

Send RBRqst, remember to set NonFBTIP

s[PCtlSetNonFBTIP, H];

Jmp[HMReturn1PC];

};

IF NOT v[RPValid] THEN {

Victim is not valid, don't flush it; Send RBRqst; Set NonFBTIP (this test could be done earlier with some care)

s[PCtlSetNonFBTIP, H];

Jmp[HMReturn1PC];

};

};

= HMRR6PC => {

IF TRUE THEN {

Send RBRqst; Set NonFBTIP; Put RealAddress on ABus to load Snooper when FBRqst comes back

s[PCtlSetNonFBTIP, H];

ss[PCtlABusCmd, ABusRqstBuf];

Jmp[HMReturn1PC];

};

};

= HMReturn1PC => {

Blow one cycle to let NonFBTIP get set

IF TRUE THEN {

Jmp[HMReturn2PC];

}

};

= HMReturn2PC => {

IF v[NonFBTIP] AND NOT v[TimeOut] THEN {

Wait for rply; Put RealAddress on ABus to load Snooper when FBRqst comes back

ss[PCtlABusCmd, ABusRqstBuf];

s[PCtlSelRplyData, H];

Jmp[HMReturn2PC];

};

IF v[NonFBTIP] AND v[TimeOut] THEN {

TimeOut : Signal and store the fault in the array

s[PCtlSelRplyData, H];

Jmp[StoreBTimeOutFaultPC];

};

IF NOT v[NonFBTIP] AND v[MyBFault] THEN {

Reply has come back with a fault, release processor and return

s[PCtlFault, H];

s[PCtlSelBFC, H];

s[PCtlReleaseP, H];

s[PCtlSelRplyData, H];

Jmp[IdlePC]; -- check that fault code gets written automatically; if not, just do it in ucode by copying one of the store fault routines

};

IF NOT v[NonFBTIP] AND NOT v[MyBFault] THEN {

Unfreeze victim and shift it to avoid victimizing the line just brought in

s[PCtlShftVictim, H];

SELECT vs[Stack] FROM

=FromRead => {

Nothing else to do, just release the processor

s[PCtlReleaseP, H];

s[PCtlSelRplyData, H];

Jmp[IdlePC];

};

= FromWrite => {

Check if address is in array

s[PCtlWtMchVCam, H];

Jmp[PSRetryPC];

};

= FromCWS => {

Check if address is in array

s[PCtlWtMchVCam, H];

Jmp[PCWSRetryPC];

};

ENDCASE => ERROR;

};

};

= StoreMemAccessFaultPC => {

IF TRUE THEN {

Write fault code into the RAM, cycle 1

WriteRam1[SCmdLVM, DBusABus];

ss[PCtlABusCmd, ABusFault+FaultMemAccess];

Jmp[SMAF2PC];

};

};

= SMAF2PC => {

IF TRUE THEN {

Write fault code into the RAM, cycle 2

WriteRam2[SCmdLVM, DBusABus];

ss[PCtlABusCmd, ABusFault+FaultMemAccess];

Jmp[SMAF3PC];

};

};

= SMAF3PC => {

IF v[RamForP] THEN {

Write completed successfully. Go back to Idle loop

WriteRam3[SCmdLVM, DBusABus];

s[PCtlFault, H];

ss[PCtlFaultCode, FaultMemAccess];

s[PCtlReleaseP, H];

Jmp[IdlePC];

};

IF NOT v[RamForP] THEN {

Ratted! Redo the access

ss[PCtlDBusCmd, DBusABus];

WriteRam1[SCmdLVM, DBusABus];

ss[PCtlABusCmd, ABusFault+FaultMemAccess];

Jmp[SMAF2PC];

};

};

= StoreBTimeOutFaultPC => {

IF TRUE THEN {

Write fault code into the RAM, cycle 1

WriteRam1[SCmdLVM, DBusABus];

ss[PCtlABusCmd, ABusFault+FaultBTimeOut];

Jmp[SBTOF2PC];

};

};

= SBTOF2PC => {

IF TRUE THEN {

Write fault code into the RAM, cycle 2

WriteRam2[SCmdLVM, DBusABus];

ss[PCtlABusCmd, ABusFault+FaultBTimeOut];

Jmp[SBTOF3PC];

};

};

= SBTOF3PC => {

IF v[RamForP] THEN {

Write completed successfully. Go back to Idle loop

WriteRam3[SCmdLVM, DBusABus];

s[PCtlFault, H];

ss[PCtlFaultCode, FaultBTimeOut];

s[PCtlReleaseP, H];

Jmp[IdlePC];

};

IF NOT v[RamForP] THEN {

Ratted! Redo the access

WriteRam1[SCmdLVM, DBusABus];

ss[PCtlABusCmd, ABusFault+FaultBTimeOut];

Jmp[SBTOF2PC];

};

};

= StoreIOAccessFaultPC => {

IF TRUE THEN {

Write fault code into the RAM, cycle 1

WriteRam1[SCmdLVM, DBusABus];

ss[PCtlABusCmd, ABusFault+FaultIOAccess];

Jmp[SIOAF2PC];

};

};

= SIOAF2PC => {

IF TRUE THEN {

Write fault code into the RAM, cycle 2

WriteRam2[SCmdLVM, DBusABus];

ss[PCtlABusCmd, ABusFault+FaultIOAccess];

Jmp[SIOAF3PC];

};

};

= SIOAF3PC => {

IF v[RamForP] THEN {

Write completed successfully. Go back to Idle loop

WriteRam3[SCmdLVM, DBusABus];

s[PCtlFault, H];

ss[PCtlFaultCode, FaultIOAccess];

s[PCtlReleaseP, H];

Jmp[IdlePC];

};

IF NOT v[RamForP] THEN {

Ratted! Redo the access

ss[PCtlDBusCmd, DBusABus];

WriteRam1[SCmdLVM, DBusABus];

ss[PCtlABusCmd, ABusFault+FaultIOAccess];

Jmp[SIOAF2PC];

};

};

Here begins the tests subroutines. They cannot be executed during normal operations. They are reached only by the mean of a PC forced by the DebugBus. It is assumed that the DynaBus is stopped during these operations.

= TestReadRamPC => {

IF TRUE THEN {

s[PCtlForceWordAddress, H];

ReadRam1[SCmdVictim];

Jmp[TRR2PC];

};

};

= TRR2PC => {

IF TRUE THEN {

s[PCtlForceWordAddress, H];

ReadRam2[SCmdVictim];

Jmp[TRR3PC];

};

};

= TRR3PC => {

IF TRUE THEN {

s[PCtlForceWordAddress, H];

ReadRam3[SCmdVictim];

s[PCtlLdRBufDataHi, H];

Jmp[IdlePC];

};

};

= TestReadRCamPC => {

IF TRUE THEN {

Read RCam using Victim, cycle 1

ReadRCam1[SCmdVictim];

Jmp[TRRC2PC];

};

};

= TRRC2PC => {

IF TRUE THEN {

Read RCam using Victim, cycle 2

ReadRCam2[SCmdVictim];

Jmp[TRRC3PC];

};

};

= TRRC3PC => {

IF TRUE THEN {

Read RCam using Victim, cycle 3

ReadRCam34[SCmdVictim];

Jmp[TRRC4PC];

};

};

= TRRC4PC => {

IF TRUE THEN {

Read RCam using Victim, cycle 4

ReadRCam34[SCmdVictim];

Jmp[TRRC5PC];

};

};

= TRRC5PC => {

IF TRUE THEN {

Put Victim into the ABus to DBus pipe (automatic) through the ABus

ss[PCtlABusCmd, ABusRCam];

Jmp[TRRC6PC];

};

};

= TRRC6PC => {

IF TRUE THEN {

Load RBufDataLo with the content of the RCam

ss[PCtlDBusCmd, DBusABus];

s[PCtlLdRBufDataHi, H];

Jmp[IdlePC];

};

};

= TestReadVCamPC => {

IF TRUE THEN {

Read VCam using Victim, cycle 1

ReadVCam1[SCmdVictim];

Jmp[TRVC2PC];

};

};

= TRVC2PC => {

IF TRUE THEN {

Read VCam using Victim, cycle 2

ReadVCam2[SCmdVictim];

Jmp[TRVC3PC];

};

};

= TRVC3PC => {

IF TRUE THEN {

Read VCam using Victim, cycle 3

ReadVCam34[SCmdVictim];

Jmp[TRVC4PC];

};

};

= TRVC4PC => {

IF TRUE THEN {

Read VCam using Victim, cycle 4

ReadVCam34[SCmdVictim];

Jmp[TRVC5PC];

};

};

= TRVC5PC => {

IF TRUE THEN {

Put Victim into the ABus to DBus pipe (automatic) through the ABus

ss[PCtlABusCmd, ABusVCam];

Jmp[TRVC6PC];

};

};

= TRVC6PC => {

IF TRUE THEN {

Load RBufDataLo with the content of the VCam

ss[PCtlDBusCmd, DBusABus];

s[PCtlLdRBufDataHi, H];

Jmp[IdlePC];

};

};

= TestShiftVictimPC => {

IF TRUE THEN {

The victim is assumed to be waiting at some place

s[PCtlShftVictim, H];

Jmp[TSV2PC];

};

};

= TSV2PC => {

IF TRUE THEN {

The victim may point to a place where it wants to get out of

Force it to stay there. Cycle 1 of 2

s[PCtlFrzVictim, H];

Jmp[TSV3PC];

};

};

= TSV3PC => {

IF TRUE THEN {

The victim may point to a place where it wants to get out of

Force it to stay there. Cycle 2 of 2

s[PCtlFrzVictim, H];

Jmp[IdlePC];

};

};

= TestResetVictimPC => {

IF TRUE THEN {

Force the victim to point at the initial place. Cycle 1 of 2

s[PCtlResetVictim, H];

Jmp[TRV2PC];

};

};

= TRV2PC => {

IF TRUE THEN {

Force the victim to point at the initial place. Cycle 2 of 2

The victim will not get out now that the used bit has been cleared

s[PCtlResetVictim, H];

Jmp[IdlePC];

};

};

ENDCASE => ERROR; -- End Transitions

};

ENDCASE => ERROR;

};

Next: PROC [it: IndexType] RETURNS [ix: NAT] = {

ix ← index[it];

index[it] ← index[it]+1;

};

index: ARRAY IndexType OF NAT ← ALL [0];

pmCodeName: ROPE = Rosemary.Register[roseClassName: "PmCode", init: Init, evalSimple: Simple];

END.