IOBridge.wirewrap.commands
Christophe Cuenod August 23, 1988 5:03:03 pm PDT
GerberToWheelNumber: PROC [d: CARD] RETURNS [number: CARD] ~ {
SELECT d FROM
IN[10..19] => number ← d-9; --This is Gerber standard definitions of apertures.
IN[70..71] => number ← d-59;
IN[20..29] => number ← d-7;
IN[72..73] => number ← d-49;
ENDCASE => ERROR;
};
WheelToGerberNumber: PROC [d: CARD] RETURNS [number: CARD] ~ {
SELECT d FROM
IN[1..10] => number ← d+9;
IN[11..12] => number ← d+59;
IN[13..22] => number ← d+7;
IN[23..24] => number ← d+49;
ENDCASE => ERROR;
};
ApertureModification 14 G54D21*D3*G54D10*X-125Y0D2*X125D1*X0Y-125D2*Y125D1*X0Y0D2*
Target
ApertureModification 18 G54D10*X0Y0D2*X100D1*X0Y0D2*G54D16*D3*
DaughterBurndy vias left row
ApertureModification 19 G54D10*X0Y0D2*X50D1*X0Y0D2*G54D16*D3*
DaughterBurndy vias right row
ApertureModification 21 G54D28*D3*G54D10*X-100Y0D2*X1000D1*X0Y-100D2*Y100D1*X0Y0D2*
Alignement target for connector
File IOBridge.wirewrap.etch1.dwg.photo IOBridge.01.gerber
File IOBridge.wirewrap.etch2.dwg.photo IOBridge.02.gerber
File IOBridge.wirewrap.etch3.dwg.photo IOBridge.03.gerber
File IOBridge.wirewrap.etch5.dwg.photo IOBridge.04.gerber
File IOBridge.wirewrap.etch6.dwg.photo IOBridge.05.gerber
File IOBridge.wirewrap.etch7.dwg.photo IOBridge.06.gerber
File IOBridge.wirewrap.topmask.dwg.photo IOBridge.07.gerber
File IOBridge.wirewrap.TopSilkscreen.dwg.photo IOBridge.08.gerber