[_CD4_]<dragon7.0>EU5>EUImpl.mesa!1

EUImpl.mesa

Louis Monier June 17, 1986 8:06:14 pm PDT

McCreight, May 12, 1986 12:23:08 pm PDT

Bertrand Serlet May 15, 1987 4:50:43 pm PDT

Barth, April 19, 1986 5:25:00 pm PST

Last Edited by: Louis Monier April 24, 1987 1:35:31 pm PDT

DIRECTORY CMosB, CoreClasses, CoreCreate, CoreFlat, CoreIO, CoreProperties, Dragon, EU, EUArith, EUInner, EUUtils, EUPadFrame, Ports, PWCore, Rosemary, Sisyph;

EUImpl: CEDAR PROGRAM

IMPORTS CoreClasses, CoreCreate, CoreFlat, CoreIO, CoreProperties, EUArith, EUInner, EUUtils, EUPadFrame, Ports, PWCore, Rosemary

EXPORTS EU =

BEGIN OPEN EU, CoreCreate;

public: Wire ← EUUtils.GenWiresForBonnie[];

EUName: ROPE = Rosemary.Register[roseClassName: "EU", init: EUInit, evalSimple: EUSimple];

AssertionFailed: SIGNAL [message: ROPE] = CODE;

MoreThanOne: PROC [a, b, c, d: BOOL ← FALSE] RETURNS [BOOL ← FALSE] ~ {

BtoN: PROC [b: BOOL] RETURNS [NAT] ~ {RETURN[IF b THEN 1 ELSE 0]};

RETURN[BtoN[a]+BtoN[b]+BtoN[c]+BtoN[d]>1];

};

CreateEU: PUBLIC PROC [ typeData: REF EUTypeData ← NIL, fullEU: BOOL ← FALSE, useCkPt: BOOL ← FALSE] RETURNS [ cellType: CellType ] = {

props: Properties ← CoreProperties.Props[[$ClusterInfo, typeData]];

SELECT TRUE FROM

~fullEU => cellType ← CoreClasses.CreateUnspecified[public, EUName, props];

fullEU AND ~useCkPt => {

cellType ← EUUtils.Fetch["EU"];

IF cellType=NIL THEN {

cellType ← CreateFullEU[EUUtils.GetContext[], props];

EUUtils.Store["EU", cellType];

}};

ENDCASE => cellType ← CoreIO.RestoreCellType[EUName];

CoreProperties.PutCellTypeProp[cellType, $ClusterInfo, typeData];

Ports.InitPorts[cellType, lc, none, "DPData", "KBus"];

Ports.InitPorts[cellType, c, none, "EUAluOp2AB", "EUCondSel2AB"];

Ports.InitPorts[cellType, b, drive, "EUCondition2B", "DShOut"];

[] ← Rosemary.BindCellType[cellType: cellType, roseClassName: EUName];

[] ← CoreFlat.CellTypeCutLabels[cellType, "EU"];

};

EUInit: Rosemary.InitProc = {

state: EUState ← NEW[EUStateRec -- [ nRegs ] -- ];

{OPEN state;

[Vdd, Gnd, PadVdd, PadGnd, PhA, PhB, DPRejectB, DPData] ←

Ports.PortIndexes[cellType.public, "Vdd", "Gnd", "PadVdd", "PadGnd", "PhA", "PhB", "DPRejectB", "DPData"];

[KBus, EURdFromPBus3AB, EUWriteToPBus3AB, EUAluOp2AB, EUCondSel2AB, EUCondition2B] ←

Ports.PortIndexes[cellType.public, "KBus", "EURdFromPBus3AB", "EUWriteToPBus3AB", "EUAluOp2AB", "EUCondSel2AB", "EUCondition2B"];

[DShA, DShB, DShRd, DShWt, DShIn, DShOut, DHold, DStAd] ←

Ports.PortIndexes[cellType.public, "DShA", "DShB", "DShRd", "DShWt", "DShIn", "DShOut", "DHold", "DStAd"];

data ← NARROW[CoreProperties.GetCellTypeProp[cellType, $ClusterInfo]];

FOR i: NAT IN [0..nRegs) DO ram[i] ← 0 ENDLOOP;

ram[EUUtils.constAdr+1] ← 1;

ram[EUUtils.constAdr+2] ← 2;

ram[EUUtils.constAdr+3] ← 3;

};

stateAny ← state;

};

EUSimple: Rosemary.EvalProc = {

-- shRegB[msb] goes out first

ShiftByOne: PROC [bIn: BOOL, shRegA, shRegB: CARD] RETURNS [newShRegA: CARD] ~ {

newShRegA ← 2*shRegB + (IF bIn THEN 1 ELSE 0); -- very, very ugly

};

Assert: PROC [condition: BOOL, message: ROPE ← NIL] =

{IF NOT condition THEN SIGNAL AssertionFailed[message]};

state: EUState ← NARROW[stateAny];

{OPEN state;

aAdr, bAdr, cAdr: CARD; -- actually, only bytes

lSrc, rSrc, stSrc: NAT;

st3IsC: BOOL;

p[KBus].d ← p[DPData].d ← none;

-- DBus stuff

Assert[NOT MoreThanOne[p[DShRd].b, p[DShWt].b, p[DShA].b, p[DShB].b], "DBus signals in illegal configuration"]; -- breaks the cluster simulation during reset

SELECT TRUE FROM

p[DShRd].b => {

regAd: NAT ← p[DStAd].c;

shRegA ← reg[regAd];

};

p[DShWt].b => {

regAd: NAT ← p[DStAd].c;

reg[regAd] ← shRegB;

};

p[DShA].b => shRegA ← ShiftByOne[p[DShIn].b, shRegA, shRegB];

p[DShB].b => {

shRegB ← shRegA;

p[DShOut].b ← EUArith.EBFLC[shRegB, 0];

};

ENDCASE => NULL;

-- PhA phase. Note that rejectBA alone inhibits almost any state change during PhA

IF p[PhA].b THEN {

cAdrInRAM: CARD; -- different from cAdr in case of reject

-- This instruction must be the first one of PhA!

-- We select dataIn only in the case of a fetch without reject

cBusVal: CARD ← IF NOT rejectBA AND readPBusBA

THEN reg[dataIn]

ELSE reg[r3B];

-- Updating the RAM addresses and various control bits; notice the role of reject

[aAdr, bAdr, cAdr, st3IsC, lSrc, rSrc, stSrc] ← EUArith.ExplodeKReg[reg[kReg]];

-- On every PhA with RejectBA the faulty address is saved in ram[euMAR]; the EU generates the appropriate cAdrInRAM when RejectBA is sensed, so the rule is: we always write into the register file!

cAdrInRAM ← IF rejectBA THEN EUUtils.marAdr ELSE cAdr; -- force address on reject

IF cAdr=EUUtils.IFUAdr THEN {p[KBus].d ← drive; p[KBus].lc ← cBusVal};

IF cAdrInRAM IN [EUUtils.stackAdr .. EUUtils.bogusAdr) THEN ram[cAdrInRAM] ← cBusVal

ELSE Assert[FALSE, "EU cAdr out of range"];

-- I don't know who wrote this, so I treat it as a black box (LMM)

IF cAdr # EUUtils.junkAdr THEN {

IF data # NIL AND data.noteStore # NIL AND NOT data.storeNoted THEN {

data.noteStore[data: data.data, reg: cAdrInRAM, value: cBusVal];

data.storeNoted ← TRUE;

};

IF ~rejectBA AND ~conditionBA THEN carryAB ← carryBA;

IF ~rejectBA THEN {

IF cAdr=EUUtils.fieldAdr THEN reg[field] ← cBusVal;

reg[left] ← SELECT Dragon.ALULeftSources[VAL[lSrc]] FROM

aBus => ram[aAdr],

rBus => reg[r2B],

cBus => cBusVal,

ENDCASE => ERROR;

reg[right] ← SELECT Dragon.ALURightSources[VAL[rSrc]] FROM

bBus => ram[bAdr],

rBus => reg[r2B],

cBus => cBusVal,

kBus => p[KBus].lc,

fCtlReg => reg[field],

ENDCASE => ERROR;

reg[st2A] ← SELECT Dragon.Store2ASources[VAL[stSrc]] FROM

bBus => ram[bAdr],

cBus => cBusVal,

rBus => reg[r2B],

ENDCASE => ERROR;

reg[r3A] ← reg[r2B];

reg[st3A] ← IF st3IsC THEN cBusVal ELSE reg[st2B];

p[DPData].d ← drive; -- Send address to Cache only once: the cache latches it.

p[DPData].lc ← reg[r2B];

};

}

ELSE IF data # NIL THEN data.storeNoted ← FALSE;

-- PhiB phase. Most of the computations take place during PhB

IF p[PhB].b THEN {

aluOut, fuOut: CARD; -- temporary

overflow, c32, lz, ez, il: BOOL;

aluOps: Dragon.ALUOps ← VAL[p[EUAluOp2AB].c];

DPRejectB is valid at the end of PhiB but bogus on PhiA, so it must be latched on PhiB.

rejectBA ← p[DPRejectB].b;

readPBusBA ← p[EURdFromPBus3AB].b;

-- Receive RAM addresses and control bits on KBus from IFU

reg[kReg] ← p[KBus].lc;

-- PBus: notice that in case of reject during a store, we keep sending the data even though it is useless; this could be changed if needed.

Assert[NOT (p[EUWriteToPBus3AB].b AND p[EURdFromPBus3AB].b)];

reg[r3B] ← reg[r3A]; -- copy address

reg[dataIn] ← p[DPData].lc; -- latch whatever comes from the pads

-- Driving the PBus in case of a store

IF p[EUWriteToPBus3AB].b THEN {

p[DPData].d ← drive;

p[DPData].lc ← reg[st3A]

};

-- Data pipe

reg[st2B] ← reg[st2A];

-- ALU computation

[aluOut, c32, carryBA] ← EUArith.ALUOperation[aluOps, reg[left], reg[right], carryAB];

-- FU computation

fuOut ← IF aluOps=FOP THEN EUArith.FieldOp[reg[left], reg[st2A], reg[right]] ELSE 0;

-- Now pick up the result

reg[r2B] ← SELECT aluOps FROM

BndChk => reg[left],

FOP => fuOut,

ENDCASE => aluOut;

-- Condition and trap generation

overflow ← ((c32 # EUArith.EBFLC[aluOut, 0]) # (EUArith.EBFLC[reg[left], 0] # EUArith.EBFLC[reg[right], 0]));

lz ← (c32#(EUArith.EBFLC[reg[left], 0]#EUArith.EBFLC[reg[right], 0]));

ez ← aluOut=0;

il ← EUArith.LispTest[reg[left]] OR EUArith.LispTest[reg[right]] OR EUArith.LispTest[aluOut];

conditionBA ← SELECT Dragon.CondSelects[VAL[p[EUCondSel2AB].c]] FROM

False => FALSE,

EZ => ez,

LZ => lz, -- VSub<0

LE => ez OR lz, -- VSub<=0,

NE => ~ez,

GE => ~lz, -- VSub>=0

GZ => ~(ez OR lz), -- VSub>0,

OvFl => overflow,

BC => ~c32,

IL => il, -- the 3 high-order bits must be the same for both operands and result

NotBC => c32,

NotIL => ~il,

ModeFault => TRUE,

ENDCASE => ERROR Rosemary.Stop["Invalid EUCondition2B Code"];

p[EUCondition2B].b ← conditionBA;

};

}};

globalPos: NAT ← 0; -- add the increment, then put the pad

SetFirst: PROC [pos: NAT] = {globalPos ← pos};

Next: PROC [] RETURNS [NAT] = {RETURN[Move[1]]};

Move: PROC [delta: NAT] RETURNS [NAT] = {

globalPos ← globalPos+delta;

RETURN[globalPos]};

CreateFullEU: PROC [cx: Sisyph.Context, props: Properties ← NIL] RETURNS [cellType: CellType] = {

vSize: NAT = 41;

hSize: NAT = 50;

left: NAT = 0;

bottom: NAT = left+vSize; -- 41

right: NAT = bottom+hSize; -- 91

top: NAT = right+vSize; -- 132

pads: EUPadFrame.Pads ← NIL;

dpData: Wire ← FindWire[public, "DPData"];

aluOp: Wire ← FindWire[public, "EUAluOp2AB"];

condSel: Wire ← FindWire[public, "EUCondSel2AB"];

kBus: Wire ← FindWire[public, "KBus"];

dStAd: Wire ← FindWire[public, "DStAd"];

onlyInternal: Wire ← WireList[LIST[

"phA", "phB", "nPhA", "nPhB",

"enWrtPBusPhA", "enWrtPBusPhB", "enWrtIFUPhA", "enWrtIFUPhB", "condition",

"writePBus", "readPBus3AB", "dpRejectB", Seq["aluOp", 4], Seq["condSel", 4],

"shiftA", "shiftB", "read", "write", "shIn", "shOut", "hold", Seq["dStateAd", 4],

Seq["fromIFU", 32], Seq["toIFU", 32], Seq["toPBus", 32], Seq["fromPBus", 32],

"reject" ]]; -- just for routing

-- Left side

SetFirst[left+10];

pads ← EUPadFrame.AddPad[pads, "DShA", $In, Next[], ["toChip", "shiftA"]]; -- new: 11

pads ← EUPadFrame.AddPad[pads, "Gnd", $Gnd, Next[]];

pads ← EUPadFrame.AddPad[pads, "DShB", $In, Next[], ["toChip", "shiftB"]];

pads ← EUPadFrame.AddPad[pads, "DShRd", $In, Next[], ["toChip", "read"]];

pads ← EUPadFrame.AddPad[pads, "PadGnd", $PadGnd, Next[]];

pads ← EUPadFrame.AddPad[pads, "DShWt", $In, Next[], ["toChip", "write"]];

pads ← EUPadFrame.AddPad[pads, "DShIn", $In, Next[], ["toChip", "shIn"]];

pads ← EUPadFrame.AddPad[pads, "PadVdd", $PadVdd, Next[]];

pads ← EUPadFrame.AddPad[pads, "DShOut", $Out, Next[], ["fromChip", "shOut"]];

pads ← EUPadFrame.AddPad[pads, "DHold", $In, Next[], ["toChip", "hold"]];

pads ← EUPadFrame.AddPad[pads, "Vdd", $Vdd, Next[]];

pads ← EUPadFrame.AddPad[pads, dStAd[0], $In, Next[], ["toChip", "dStateAd[0]"]];

pads ← EUPadFrame.AddPad[pads, dStAd[1], $In, Next[], ["toChip", "dStateAd[1]"]];

pads ← EUPadFrame.AddPad[pads, "Vdd", $Vdd, Next[]];

pads ← EUPadFrame.AddPad[pads, dStAd[2], $In, Next[], ["toChip", "dStateAd[2]"]];

pads ← EUPadFrame.AddPad[pads, dStAd[3], $In, Next[], ["toChip", "dStateAd[3]"]];

pads ← EUPadFrame.AddPad[pads, NIL, $Copyright, Next[]];

pads ← EUPadFrame.AddPad[pads, NIL, $Logo, Next[]];

pads ← EUPadFrame.AddPad[pads, NIL, $Name, Next[]];

-- Bottom side: msb(0) on the left

SetFirst[bottom]; -- 41

FOR i: NAT IN [0..16) DO

index: NAT ← 2*i;

pads ← EUPadFrame.AddPad[pads, dpData[index], $IOTst, Move[2], -- s on 43

["toChip", Index["fromPBus", index]],

["fromChip", Index["toPBus", index]],

["enWA", "enWrtPBusPhA"],

["enWB", "enWrtPBusPhB"]];

pads ← EUPadFrame.AddPad[pads, dpData[index+1], $IOTst, Next[], -- s on 44

["toChip", Index["fromPBus", index+1]],

["fromChip", Index["toPBus", index+1]],

["enWA", "enWrtPBusPhA"],

["enWB", "enWrtPBusPhB"]];

ENDLOOP;

SetFirst[bottom]; -- 42

pads ← EUPadFrame.AddPad[pads, "Gnd", $Gnd, Next[]]; -- v on 42

pads ← EUPadFrame.AddPad[pads, "PadVdd", $PadVdd, Move[3]];

pads ← EUPadFrame.AddPad[pads, "Vdd", $Vdd, Move[3]];

pads ← EUPadFrame.AddPad[pads, "PadVdd", $PadVdd, Move[3]];

pads ← EUPadFrame.AddPad[pads, "PadGnd", $PadGnd, Move[3]];

pads ← EUPadFrame.AddPad[pads, "Gnd", $Gnd, Move[3]];

pads ← EUPadFrame.AddPad[pads, "PadGnd", $PadGnd, Move[3]];

pads ← EUPadFrame.AddPad[pads, "PadVdd", $PadVdd, Move[3]];

pads ← EUPadFrame.AddPad[pads, "Vdd", $Vdd, Move[3]];

pads ← EUPadFrame.AddPad[pads, "PadVdd", $PadVdd, Move[3]];

pads ← EUPadFrame.AddPad[pads, "PadGnd", $PadGnd, Move[3]];

pads ← EUPadFrame.AddPad[pads, "Gnd", $Gnd, Move[3]];

pads ← EUPadFrame.AddPad[pads, "PadGnd", $PadGnd, Move[3]];

pads ← EUPadFrame.AddPad[pads, "PadVdd", $PadVdd, Move[3]];

pads ← EUPadFrame.AddPad[pads, "Vdd", $Vdd, Move[3]];

pads ← EUPadFrame.AddPad[pads, "PadVdd", $PadVdd, Move[3]];

pads ← EUPadFrame.AddPad[pads, "Gnd", $Gnd, Move[3]];

-- Right side: msb(0) on the left

SetFirst[right+8];

pads ← EUPadFrame.AddPad[pads, "PadGnd", $PadGnd, Next[]]; -- v on 100

pads ← EUPadFrame.AddPad[pads, "DPRejectB", $In, Next[], ["toChip", "dpRejectB"]];

pads ← EUPadFrame.AddPad[pads, "PhA", $Clk, Next[], ["Clock", "phA"], ["nClock", "nPhA"]];

pads ← EUPadFrame.AddPad[pads, "Gnd", $Gnd, Next[]];

pads ← EUPadFrame.AddPad[pads, "PhB", $Clk, Next[], ["Clock", "phB"], ["nClock", "nPhB"]];

pads ← EUPadFrame.AddPad[pads, "PadGnd", $PadGnd, Next[]]; -- former VRef

pads ← EUPadFrame.AddPad[pads, "PadGnd", $PadGnd, Next[]];

pads ← EUPadFrame.AddPad[pads, "EUCondition2B", $Out, Next[], ["fromChip", "condition"]];

pads ← EUPadFrame.AddPad[pads, "EURdFromPBus3AB", $In, Next[], ["toChip", "readPBus3AB"]];

pads ← EUPadFrame.AddPad[pads, "PadVdd", $PadVdd, Next[]];

pads ← EUPadFrame.AddPad[pads, "EUWriteToPBus3AB", $In, Next[], ["toChip", "writePBus"]];

pads ← EUPadFrame.AddPad[pads, aluOp[0], $In, Next[], ["toChip", "aluOp[0]"]];

pads ← EUPadFrame.AddPad[pads, "Vdd", $Vdd, Next[]];

pads ← EUPadFrame.AddPad[pads, aluOp[1], $In, Next[], ["toChip", "aluOp[1]"]];

pads ← EUPadFrame.AddPad[pads, aluOp[2], $In, Next[], ["toChip", "aluOp[2]"]];

pads ← EUPadFrame.AddPad[pads, "PadVdd", $PadVdd, Next[]];

pads ← EUPadFrame.AddPad[pads, aluOp[3], $In, Next[], ["toChip", "aluOp[3]"]];

pads ← EUPadFrame.AddPad[pads, condSel[0], $In, Next[], ["toChip", "condSel[0]"]];

pads ← EUPadFrame.AddPad[pads, "PadGnd", $PadGnd, Next[]];

pads ← EUPadFrame.AddPad[pads, condSel[1], $In, Next[], ["toChip", "condSel[1]"]];

pads ← EUPadFrame.AddPad[pads, condSel[2], $In, Next[], ["toChip", "condSel[2]"]];

pads ← EUPadFrame.AddPad[pads, "Gnd", $Gnd, Next[]];

pads ← EUPadFrame.AddPad[pads, condSel[3], $In, Next[], ["toChip", "condSel[3]"]];

-- Top side

SetFirst[top]; -- 132

FOR i: NAT IN [0..16) DO

index: NAT ← 31-2*i;

pads ← EUPadFrame.AddPad[pads, kBus[index], $IOTst, Move[2], -- s on 134

["toChip", Index["fromIFU", index]],

["fromChip", Index["toIFU", index]],

["enWA", "enWrtIFUPhA"],

["enWB", "enWrtIFUPhB"]]; -- EU never write on KBus during PhB

pads ← EUPadFrame.AddPad[pads, kBus[index-1], $IOTst, Next[], -- s on 135

["toChip", Index["fromIFU", index-1]],

["fromChip", Index["toIFU", index-1]],

["enWA", "enWrtIFUPhA"],

["enWB", "enWrtIFUPhB"]];

ENDLOOP;

SetFirst[top]; -- 132

pads ← EUPadFrame.AddPad[pads, "Gnd", $Gnd, Next[]]; -- v on 133

pads ← EUPadFrame.AddPad[pads, "PadVdd", $PadVdd, Move[3]];

pads ← EUPadFrame.AddPad[pads, "Vdd", $Vdd, Move[3]];

pads ← EUPadFrame.AddPad[pads, "PadVdd", $PadVdd, Move[3]];

pads ← EUPadFrame.AddPad[pads, "PadGnd", $PadGnd, Move[3]];

pads ← EUPadFrame.AddPad[pads, "Gnd", $Gnd, Move[3]];

pads ← EUPadFrame.AddPad[pads, "PadGnd", $PadGnd, Move[3]];

pads ← EUPadFrame.AddPad[pads, "PadVdd", $PadVdd, Move[3]];

pads ← EUPadFrame.AddPad[pads, "Vdd", $Vdd, Move[3]];

pads ← EUPadFrame.AddPad[pads, "PadVdd", $PadVdd, Move[3]];

pads ← EUPadFrame.AddPad[pads, "PadGnd", $PadGnd, Move[3]];

pads ← EUPadFrame.AddPad[pads, "Gnd", $Gnd, Move[3]];

pads ← EUPadFrame.AddPad[pads, "PadGnd", $PadGnd, Move[3]];

pads ← EUPadFrame.AddPad[pads, "PadVdd", $PadVdd, Move[3]];

pads ← EUPadFrame.AddPad[pads, "Vdd", $Vdd, Move[3]];

pads ← EUPadFrame.AddPad[pads, "PadVdd", $PadVdd, Move[3]];

pads ← EUPadFrame.AddPad[pads, "Gnd", $Gnd, Move[3]];

cellType ← EUPadFrame.CreatePadFrame[

public: public,

onlyInternal: onlyInternal,

innerInstance: Instance[PWCore.RotateCellType[EUInner.CreateEUInner[cx], $Rot90],

["dStateAd", "dStateAd"], ["hold", "hold"], ["reject", "reject"] ],

pads: pads,

params: [

nbPadsX: hSize,

nbPadsY: vSize,

horizLayer: "metal2",

vertLayer: "metal",

centerDisplacement: [-200*CMosB.lambda, 0]],

name: EUName,

props: props

];

};

END.