DIRECTORY
CD,
NMos,
NMosTransistors,
NMosContacts,
CDInstances,
CDBasics,
Recognizer,
CStitching;


NMosRecognizerImpl: CEDAR PROGRAM
IMPORTS NMos, NMosTransistors, NMosContacts, CDInstances, Recognizer, CDBasics = 
BEGIN

RegionList: TYPE = LIST OF REF CStitching.Region;

ext: CD.Number = 2*NMos.lambda;
cutExt: CD.Number = NMos.lambda;
cutWidth: CD.Number = 2*NMos.lambda;
cutMmWidth: CD.Number = 3*NMos.lambda;
 	
polyButtingExt: CD.Number = 3*NMos.lambda;  --Starting from the uncovered poly edge of a butting contact, this is the distance from that edge to the start of the region where poly and diffusion overlap;
pullupWidthFor2or3: CD.Number = 4*NMos.lambda;  --The width of the butting contact contained in a pullup.  If the width is less than this than a double or triple covered region list will result otherwise the pullup is wide enough so that only a single rect instance will result.

SingleRectInstances: PROC [active1, active2: CD.Layer, coveredList: RegionList, possibleInstListPtr: REF Recognizer.InstAndForbidLayerList] = 
BEGIN
SELECT active1 FROM
NMos.pol => 
IF active2 = NMos.dif THEN {
SingleRectTransistors[coveredList, possibleInstListPtr];
SingleRectPullups[coveredList, possibleInstListPtr];
};
NMos.dif => 
IF active2 = NMos.pol THEN {
SingleRectTransistors[coveredList, possibleInstListPtr];
SingleRectPullups[coveredList, possibleInstListPtr];
};
NMos.cut => 
IF active2 = NMos.met THEN
SingleRectCutContacts[coveredList, possibleInstListPtr];
NMos.met => 
IF active2 = NMos.cut THEN
SingleRectCutContacts[coveredList, possibleInstListPtr];
NMos.cut2 =>
IF active2 = NMos.met2 THEN
SingleRectMmContacts[coveredList, possibleInstListPtr];
NMos.met2 =>
IF active2 = NMos.cut2 THEN
SingleRectMmContacts[coveredList, possibleInstListPtr];
ENDCASE => NULL;
END;

SingleRectTransistors: PROC [coveredList: RegionList, possibleInstListPtr: REF Recognizer.InstAndForbidLayerList] =
BEGIN
rect: CD.Rect _ coveredList.first.rect;
position: CD.Position _ CDBasics.BaseOfRect[rect]; 
xDistance: CD.Number _ rect.x2 - rect.x1;
yDistance: CD.Number _ rect.y2 - rect.y1;
forbiddenLayerList: LIST OF CD.Layer _ LIST [NMos.cut, NMos.bur];
newObject: CD.Object;
newInst: CD.Instance;
FOR impList: LIST OF NMosTransistors.Implant _ LIST[NMosTransistors.enhancement, NMosTransistors.strongDepletion], impList.rest WHILE impList #NIL DO
position _ [position.x-ext, position.y-ext];
newObject _ NMosTransistors.CreateTransistor[w: xDistance, l: yDistance, implant: impList.first];
newInst _ CDInstances.NewInst[ob: newObject, trans: [position]];
PlaceOnList[newInst, possibleInstListPtr, forbiddenLayerList];
newObject _ NMosTransistors.CreateTransistor[w: xDistance, l: yDistance, implant: impList.first];
newInst _ CDInstances.NewInst[ob: newObject, trans: [position, rotate90]];
PlaceOnList[newInst, possibleInstListPtr, forbiddenLayerList];
newObject _ NMosTransistors.CreateTransistor[w: yDistance, l: xDistance, implant: impList.first];
newInst _ CDInstances.NewInst[ob: newObject, trans: [position]];
PlaceOnList[newInst, possibleInstListPtr, forbiddenLayerList];
newObject _ NMosTransistors.CreateTransistor[w: yDistance, l: xDistance, implant: impList.first];
newInst _ CDInstances.NewInst[ob: newObject, trans: [position, rotate90]];
PlaceOnList[newInst, possibleInstListPtr, forbiddenLayerList];
ENDLOOP;
END;

SingleRectPullups: PROC [coveredList: RegionList, possibleInstListPtr: REF Recognizer.InstAndForbidLayerList] = 
BEGIN
rect: CD.Rect _ coveredList.first.rect;
position: CD.Position _ CDBasics.BaseOfRect[rect]; 
xDistance: CD.Number _ rect.x2 - rect.x1;
yDistance: CD.Number _ rect.y2 - rect.y1;
newObject: CD.Object;
newInst: CD.Instance;
IF xDistance >= pullupWidthFor2or3 THEN {
newObject _ NMosTransistors.CreatePullUp[w: xDistance, l: yDistance];
newInst _ CDInstances.NewInst[ob: newObject, trans: [[position.x-ext, position.y-ext]]];
PlaceOnList[newInst, possibleInstListPtr];
newObject _ NMosTransistors.CreatePullUp[w: xDistance, l: yDistance];
newInst _ CDInstances.NewInst[ob: newObject, trans: [[position.x-ext, position.y-polyButtingExt], rotate180]];
PlaceOnList[newInst, possibleInstListPtr];
};
IF yDistance >= pullupWidthFor2or3 THEN {
newObject _ NMosTransistors.CreatePullUp[w: yDistance, l: xDistance];
newInst _ CDInstances.NewInst[ob: newObject, trans: [[position.x-polyButtingExt, position.y-ext], rotate90]];
PlaceOnList[newInst, possibleInstListPtr];
newObject _ NMosTransistors.CreatePullUp[w: yDistance, l: xDistance];
newInst _ CDInstances.NewInst[ob: newObject, trans: [[position.x-ext, position.y-ext], rotate270]];
PlaceOnList[newInst, possibleInstListPtr];
}
END;

SingleRectCutContacts: PROC [coveredList: RegionList, possibleInstListPtr: REF Recognizer.InstAndForbidLayerList] =
BEGIN
rect: CD.Rect _ coveredList.first.rect;
position: CD.Position _ CDBasics.BaseOfRect[rect];
orient: CD.Orientation _ original;
length: CD.Number _ rect.y2-rect.y1;
forbiddenList: LIST OF CD.Layer _ LIST[NMos.imp];
IF length = cutWidth THEN {
length _ rect.x2-rect.x1+2*cutExt;
orient _ rotate90;
};
position _ [position.x-cutExt, position.y-cutExt];
PlaceOnList[CDInstances.NewInst[ob: NMosContacts.CreatePolyCon[l: length], trans: [position, orient]], possibleInstListPtr];
PlaceOnList[CDInstances.NewInst[ob: NMosContacts.CreateDifCon[l: length], trans: [position, orient]], possibleInstListPtr];
FOR orient: CD.Orientation IN CD.Orientation DO
IF ~CDBasics.IncludesMirrorX[orient] THEN {
PlaceOnList[CDInstances.NewInst[ob: NMosContacts.CreateButCon[], trans: [position, orient]], possibleInstListPtr, forbiddenList];
}
ENDLOOP;
END;

SingleRectMmContacts: PROC [coveredList: RegionList, possibleInstListPtr: REF Recognizer.InstAndForbidLayerList] =
BEGIN
rect: CD.Rect _ coveredList.first.rect;
position: CD.Position _ CDBasics.BaseOfRect[rect];
orient: CD.Orientation _ original;
length: CD.Number _ rect.y2-rect.y1;
IF length = cutMmWidth THEN {
length _ rect.x2-rect.x1;
orient _ rotate90;
};
IF length < 4*NMos.lambda THEN {  --see NMosContactsImpl for why this is needed
position _ [position.x-cutExt, position.y-cutExt];
length _ length+2*cutExt;
}
ELSE
{
position _ [position.x-2*cutExt, position.y-2*cutExt];
length _ length+4*cutExt;
};
PlaceOnList[CDInstances.NewInst[ob: NMosContacts.CreateMmCon[length], trans: [position, orient]], possibleInstListPtr];
END;

DoubleRectInstances: PROC [active1, active2: CD.Layer, coveredList: RegionList, possibleInstListPtr: REF Recognizer.InstAndForbidLayerList] = 
BEGIN
SELECT active1 FROM
NMos.pol => 
IF active2 = NMos.dif THEN {
DoubleRectAngleTransistors[coveredList, possibleInstListPtr];
DoubleRectPullups[coveredList, possibleInstListPtr];
};
NMos.dif => 
IF active2 = NMos.pol THEN {
DoubleRectAngleTransistors[coveredList, possibleInstListPtr];
DoubleRectPullups[coveredList, possibleInstListPtr];
};
ENDCASE => NULL;
END;

DoubleRectAngleTransistors: PROC [coveredList: RegionList, possibleInstListPtr: REF Recognizer.InstAndForbidLayerList] =
BEGIN
rect1: CD.Rect _ coveredList.first.rect;
rect2: CD.Rect _ coveredList.rest.first.rect;
minX: CD.Number_  MIN[rect1.x1, rect2.x1];
minY: CD.Number _ MIN[rect1.y1, rect2.y1];
maxX: CD.Number _ MAX[rect1.x2, rect2.x2];
maxY: CD.Number _ MAX[rect1.y2, rect2.y2];
position: CD.Position _ [minX-ext, minY-ext]; 
forbiddenLayerList: LIST OF CD.Layer _ LIST [NMos.cut, NMos.bur];
IF rect1.x2-rect1.x1 = rect2.y2-rect2.y1 THEN {
length: CD.Number _ rect1.x2-rect1.x1;
width: CD.Number _ rect1.y2-rect1.y1+rect2.x2-rect2.x1-length;
FOR orient: CD.Orientation IN CD.Orientation DO
newObject: CD.Object _ NMosTransistors.CreateAngleTransistor[w: width, l: length];
newInst: CD.Instance _ CDInstances.NewInst[ob: newObject, trans: [position, orient]];
PlaceOnList[newInst, possibleInstListPtr, forbiddenLayerList];
ENDLOOP;
};
IF rect1.y2-rect1.y1 = rect2.x2-rect2.x1 THEN {
length: CD.Number _ rect1.y2-rect1.y1;
width: CD.Number _ rect1.x2-rect1.x1+rect2.y2-rect2.y1-length;
FOR orient: CD.Orientation IN CD.Orientation DO
newObject: CD.Object _ NMosTransistors.CreateAngleTransistor[w: width, l: length];
newInst: CD.Instance _ CDInstances.NewInst[ob: newObject, trans: [position, orient]];
PlaceOnList[newInst, possibleInstListPtr, forbiddenLayerList];
ENDLOOP;
};
END;

DoubleRectPullups: PROC [coveredList: RegionList, possibleInstListPtr: REF Recognizer.InstAndForbidLayerList] = 
BEGIN
rect1: CD.Rect _ coveredList.first.rect;
rect2: CD.Rect _ coveredList.rest.first.rect;
position: CD.Position; 
minX: CD.Number_  MIN[rect1.x1, rect2.x1];
minY: CD.Number _ MIN[rect1.y1, rect2.y1];
maxX: CD.Number _ MAX[rect1.x2, rect2.x2];
maxY: CD.Number _ MAX[rect1.y2, rect2.y2];
width: CD.Number;
length: CD.Number;
newObject: CD.Object;
newInst: CD.Instance;
IF minY = rect1.y1 THEN { 
width _ rect1.x2-rect1.x1;
position.x _ rect1.x1-ext;
}
ELSE {
width _ rect2.x2-rect2.x1;
position.x _ rect2.x1-ext;
};
 IF width <= pullupWidthFor2or3 THEN {
position.y _ minY-ext;
length _ maxY-minY;
newObject _ NMosTransistors.CreatePullUp[w: width, l: length];
newInst _ CDInstances.NewInst[ob: newObject, trans: [position]];
PlaceOnList[newInst, possibleInstListPtr];
};
IF maxX = rect1.x1 THEN {
width _ rect1.y2-rect1.y1;
position.y _ rect1.y1-ext;
}
ELSE {
width _ rect2.y2-rect2.y1;
position.y _ rect2.y1_ext;
};
 IF width <= pullupWidthFor2or3 THEN {
position.x _ minX-polyButtingExt;
length _ maxX-minX;
newObject _ NMosTransistors.CreatePullUp[w: width, l: length];
newInst _ CDInstances.NewInst[ob: newObject, trans: [position, rotate90]];
PlaceOnList[newInst, possibleInstListPtr];
};
IF maxY = rect1.y1 THEN {
width _ rect1.x2-rect1.x1;
position.x _ rect1.x1-ext;
}
ELSE {
width _ rect2.x2-rect2.x1;
position.x _ rect2.x1-ext;
};
IF width <= pullupWidthFor2or3 THEN {
position.y _ minY-polyButtingExt;
length _ maxY-minY;
newObject _ NMosTransistors.CreatePullUp[w: width, l: length];
newInst _ CDInstances.NewInst[ob: newObject, trans: [position, rotate180]];
PlaceOnList[newInst, possibleInstListPtr];
};
IF minX = rect1.x1 THEN { 
width _ rect1.y2-rect1.y1;
position.y _ rect1.y1-ext;
}
ELSE {
width _ rect2.y2-rect2.y1;
position.y _ rect2.y1-ext;
};
 IF width <= pullupWidthFor2or3 THEN {
position.x _ minX-ext;
length _ maxX-minX;
newObject _ NMosTransistors.CreatePullUp[w: width, l: length];
newInst _ CDInstances.NewInst[ob: newObject, trans: [position, rotate270]];
PlaceOnList[newInst, possibleInstListPtr];
};
END;

TripleRectInstances: PROC [active1, active2: CD.Layer, coveredList: RegionList, possibleInstListPtr: REF Recognizer.InstAndForbidLayerList] = 
BEGIN
SELECT active1 FROM
NMos.pol => 
IF active2 = NMos.dif THEN
TripleRectPullups[coveredList, possibleInstListPtr];
NMos.dif => 
IF active2 = NMos.pol THEN 
TripleRectPullups[coveredList, possibleInstListPtr];
ENDCASE => NULL;
END;

TripleRectPullups: PROC [coveredList: RegionList, possibleInstListPtr: REF Recognizer.InstAndForbidLayerList] = 
BEGIN
rect1: CD.Rect _ coveredList.first.rect;
rect2: CD.Rect _ coveredList.rest.first.rect;
rect3: CD.Rect _ coveredList.rest.rest.first.rect;
position: CD.Position; 
minX: CD.Number_  MIN[MIN[rect1.x1, rect2.x1], rect3.x1];
minY: CD.Number _ MIN[MIN[rect1.y1, rect2.y1], rect3.y1];
maxX: CD.Number _ MAX[MAX[rect1.x2, rect2.x2], rect3.y1];
maxY: CD.Number _ MAX[MAX[rect1.y2, rect2.y2], rect3.y2];
width: CD.Number;
length: CD.Number;
newObject: CD.Object;
newInst: CD.Instance;
IF minY = rect1.y1 THEN {
width _ rect1.x2-rect1.x1;
position.x _ rect1.x1-ext;
}
ELSE
IF minY = rect2.y1 THEN {
width _ rect2.x2-rect2.x1;
position.x _ rect2.x1-ext;
}
ELSE {
width _ rect3.x2-rect3.x1;
position.x _ rect3.x1-ext;
};
 IF width <= pullupWidthFor2or3 THEN {
position.y _ minY-ext;
length _ maxY-minY;
newObject _ NMosTransistors.CreatePullUp[w: width, l: length];
newInst _ CDInstances.NewInst[ob: newObject, trans: [position]];
PlaceOnList[newInst, possibleInstListPtr];
};
IF maxX = rect1.x1 THEN  {
width _ rect1.y2-rect1.y1;
position.y _ rect1.y1-ext;
}
ELSE
IF maxX = rect2.x1 THEN {
width _ rect2.y2-rect2.y1;
position.y _ rect2.y1-ext;
}
ELSE {
width _ rect3.y2-rect3.y1;
position.y _ rect3.y1-ext;
}; 
IF width <= pullupWidthFor2or3 THEN {
position.x _ minX-polyButtingExt;
length _ maxX-minX;
newObject _ NMosTransistors.CreatePullUp[w: width, l: length];
newInst _ CDInstances.NewInst[ob: newObject, trans: [position, rotate90]];
PlaceOnList[newInst, possibleInstListPtr];
};
IF maxY = rect1.y1 THEN {
width _ rect1.x2-rect1.x1;
position.x _ rect1.x1-ext;
}
ELSE
IF maxY = rect2.y1 THEN {
width _ rect2.x2-rect2.x1;
position.x _ rect2.x1-ext;
}
ELSE {
width _ rect3.x2-rect3.x1;
position.x _ rect3.x1-ext;
};
IF width <= pullupWidthFor2or3 THEN {
position.y _ minY-polyButtingExt;
length _ maxY-minY;
newObject _ NMosTransistors.CreatePullUp[w: width, l: length];
newInst _ CDInstances.NewInst[ob: newObject, trans: [position, rotate180]];
PlaceOnList[newInst, possibleInstListPtr];
};
IF minX = rect1.x1 THEN {
width _ rect1.y2-rect1.y1;
position.y _ rect1.y1-ext;
}
ELSE 
IF minX = rect2.x1 THEN {
width _ rect2.y2-rect2.y1;
position.y _ rect2.y1-ext;
}
ELSE {
width _ rect3.y2-rect3.y1;
position.y _ rect3.y2-ext;
};
 IF width <= pullupWidthFor2or3 THEN {
position.x _ minX-ext;
length _ maxX-minX;
newObject _ NMosTransistors.CreatePullUp[w: width, l: length];
newInst _ CDInstances.NewInst[ob: newObject, trans: [position, rotate270]];
PlaceOnList[newInst, possibleInstListPtr];
};
END;

PlaceOnList: PROC [instance: CD.Instance, possibleInstListPtr: REF Recognizer.InstAndForbidLayerList, forbiddenLayerList: LIST OF CD.Layer _ NIL] =
BEGIN
possibleInstListPtr^ _ CONS[NEW[Recognizer.InstAndForbidLayerRec _ [instance, forbiddenLayerList]], possibleInstListPtr^];
END;

Recognizer.RegisterPossibleInstanceProc [NMos.nmos, 1, SingleRectInstances];
Recognizer.RegisterPossibleInstanceProc[NMos.nmos, 2, DoubleRectInstances];
Recognizer.RegisterPossibleInstanceProc[NMos.nmos, 3, TripleRectInstances];
Recognizer.RegisterLayerList[technology: NMos.nmos, active1: NMos.dif, active2: NMos.pol, layerList: LIST[NMos.cut, NMos.bur, NMos.imp, NMos.met]];

Recognizer.RegisterLayerList[technology: NMos.nmos, active1: NMos.cut, active2: NMos.met, layerList: LIST[NMos.pol, NMos.dif, NMos.imp]];

Recognizer.RegisterLayerList[technology: NMos.nmos, active1: NMos.cut2, active2: NMos.met2, layerList: LIST[NMos.met]];

END.

ΈNMosRecognizerImpl.mesa The technology dependant part of recognizing objects
Gbier, July 11, 1985 10:48:17 am PDT
Gbier, August 2, 1985 5:01:42 pm PDT
Jacobi, March 19, 1986 6:40:14 pm PST
Last edited by: Christian Jacobi, November 4, 1986 5:15:26 pm PST
--Orientation 0
--Orientation 90
--Orientation180	
--Orientation 270
--Orientation 0
--Orientation 90
--Orientation180	
--Orientation 270
--places instance on possibleInstList
 
Κ
ί˜š
œL™LJš
œ$™$Jš
œ$™$Icode™%K™A—J˜J˜š
Οk	˜	Jšœ
˜J˜J˜J˜
J˜J˜	Jš
œ˜Jš
œ˜—J˜J˜šΟbœœ
˜!JšœJ˜Q—Jš
˜J˜Jš	œœœ
œ
œ˜1J˜Jšœœ˜Jšœœ˜ Jšœ
œ˜$Jšœœ˜&J˜JšœœΟcž
˜Κ
JšœœŸζ
˜–J˜š	žΠbn
œœœ6œ&˜Ž
Jš
˜šœ	˜˜šœœ˜J˜8J˜4J˜——˜šœ˜J˜8J˜4J˜——š
œ˜šœ˜J˜8——š
œ˜šœ˜J˜8——˜šœ˜J˜7——˜šœ˜J˜7——Jšœœ
˜—Jšœ
˜—J˜š œœ0œ%˜sJš
˜Jšœœ˜'Jšœ
œ'˜3J˜)J˜)Jš	œœ
œ
œ	œ˜AJš
œ˜Jšœ	œ
˜š
œ
œ
œœMœ
œ
˜•
Jš
œ,˜,Jš
œa˜aJš
œ@˜@J˜>Jš
œa˜aJš
œJ˜JJ˜>Jš
œa˜aJš
œ@˜@J˜>Jš
œa˜aJš
œJ˜JJ˜>Jšœ
˜—Jšœ
˜—J˜š œœ0œ&˜pJš
˜Jšœœ˜'Jšœ
œ'˜3Jšœœ˜)Jšœœ˜)Jšœœ˜Jšœ	œ
˜šœ!œ˜)Jš
œE˜EJš
œX˜XJ˜*Jš
œE˜EJš
œn˜nJ˜*J˜—šœ!œ˜)Jš
œE˜EJš
œm˜mJ˜*Jš
œE˜EJš
œc˜cJ˜*J˜
—šœ
˜J˜——š œœ0œ%˜sJš
˜Jšœœ˜'Jšœ
œ&˜2J˜"Jš
œ$˜$J˜1˜J˜"J˜J˜—Jš
œ2˜2Jš
œ|˜|š
œ{˜{š	œ	œ
œ
œ
˜/šœ#˜+Jš
œ
˜
Jš
œ
˜
—Jšœ
˜——Jšœ˜—š œœ0œ%˜rJš
˜Jšœœ˜'Jšœ
œ&˜2Jšœœ˜"Jšœœ˜$šœœ˜J˜J˜J˜—šœœŸ-˜OJš
œ2˜2J˜J˜
—š
˜J˜
Jš
œ6˜6J˜J˜—Jš
œw˜wJšœ˜—š œœœ6œ&˜Ž
Jš
˜šœ	˜˜šœœ˜J˜=J˜4J˜——˜šœ˜J˜=J˜4J˜——Jšœœ
˜—Jšœ
˜—J˜šΟnœœ0œ%˜xJš
˜Jšœœ˜(Jšœœ$˜-Jšœœ
œ˜*Jšœœ
œ˜*Jšœœ
œ˜*Jšœœ
œ˜*Jš
œ.˜.Jš	œœ
œ
œ	œ˜A˜/J˜&J˜>š	œ	œ
œ
œ
˜/JšœœE˜RJšœ	œJ˜UJ˜>Jšœ
˜—J˜—˜/J˜&J˜>š	œ	œ
œ
œ
˜/JšœœE˜RJšœ	œJ˜UJ˜>Jšœ
˜—J˜—Jšœ
˜—J˜š œœ0œ&˜pJš
˜Jšœœ˜(J˜-Jšœ
œ˜Jšœœ
œ˜*Jšœœ
œ˜*Jšœœ
œ˜*Jšœœ
œ˜*J˜J˜Jšœœ˜Jšœ	œ
˜Jš
œ™˜J˜J˜J˜
—˜J˜J˜J˜—š
œ&˜&J˜J˜Jš
œ>˜>Jš
œ@˜@J˜*J˜—Jš
œ™˜J˜J˜J˜
—˜J˜J˜J˜—š
œ&˜&J˜!J˜Jš
œ>˜>Jš
œJ˜JJ˜*J˜—J™˜J˜J˜J˜
—˜J˜J˜J˜—š
œ%˜%J˜!J˜Jš
œ>˜>Jš
œK˜KJ˜*J˜—J™˜J˜J˜J˜
—˜J˜J˜J˜—š
œ&˜&J˜J˜Jš
œ>˜>Jš
œK˜KJ˜*J˜—Jšœ
˜—J˜š œœœ6œ&˜Ž
Jš
˜šœ	˜˜šœ˜Jš
œ4˜4——˜šœ˜J˜4——Jšœœ
˜—Jšœ
˜—J˜š œœ0œ&˜pJš
˜Jšœœ˜(J˜-J˜2Jšœ
œ˜Jšœœ
œ ˜9Jšœœ
œ ˜9Jšœœ
œ ˜9Jšœœ
œ ˜9J˜J˜Jšœœ˜Jšœ	œ
˜Jš
œ™˜J˜J˜J˜
—˜˜J˜J˜J˜
—˜J˜J˜——š
œ&˜&J˜J˜Jš
œ>˜>Jš
œ@˜@J˜*J˜—Jš
œ™˜J˜J˜J˜
—˜˜J˜J˜J˜
—˜J˜J˜J˜——š
œ%˜%J˜!J˜Jš
œ>˜>Jš
œJ˜JJ˜*J˜—J™˜J˜J˜J˜
—˜˜J˜J˜J˜
—˜J˜J˜J˜——š
œ%˜%J˜!J˜Jš
œ>˜>Jš
œK˜KJ˜*J˜—J™˜J˜J˜J˜
—˜˜J˜J˜J˜
—˜J˜J˜J˜——š
œ&˜&J˜J˜Jš
œ>˜>Jš
œK˜KJ˜*J˜—Jšœ
˜—J˜š œœœ œ8œ
œ
œ	œ˜“
J™%Jš
˜Jšœœ
œ[˜zJšœ
˜—J˜Jš
œL˜LJš
œK˜KJš
œK˜KJ™
Jšœeœ*˜“
J˜Jšœeœ ˜‰
J˜Jšœgœ˜wJ˜Jšœ
˜—…—7ΪDq