It will set up a command tool to wait some files to appear or to be modified.
The path for all files has to be: ///Temp/IP/ (on my machine /Flasher/Cedar/Temp/IP/ )
If the name is:
Print1 => Interpress file to be plotted on the Versatec at scale .63
Useful for schematics or drawing bigger than E size (limit 68 by 68 inches)
Print2 => Interpress file to be plotted on the Versatec at scale 1 rotated by 90 degrees
Useful for E size drawings and D size schematics.
Print3 => Interpress file to be plotted on the thermal transfer printer at scale .75 rotated by 90 degrees (also clipped and translated)
Useful for board outline drawings.
Print4 => Interpress file to be plotted on the Versatec at scale 1 (also clipped and translated)
Useful for board outline drawings.
Print5 => Interpress file to be plotted on the Versatec at scale 2 (also clipped and translated)
Useful for board outline drawings.
Print6 => Gerber file to be plotted on the thermal transfer printer at scale .75 rotated by 90 degrees
Useful for artwork verification.
The set of aperture is defined in ExpertGerber.parameters1
Print7 => Gerber file to be plotted on the Versatec at scale 1
Useful for artwork verification.
The set of aperture is defined in ExpertGerber.parameters1
Print8 => Gerber file to be plotted on the Versatec at scale 2
Useful for artwork verification.
The set of aperture is defined in ExpertGerber.parameters1
Print9 => Interpress file to be plotted on the Versatec at scale 1
Useful for D size drawings or E size schematics.
Print10 => Interpress file to be plotted on the thermal transfer printer at scale .3
Useful E size schematics.
Print11 => Interpress file to be plotted on the Versatec at scale .53
Useful for 10 pages E size schematics (Softcard).
Print12 => Gerber file to be plotted on the Versatec at scale 5
Useful for artwork verification.
The set of aperture is defined in ExpertGerber.parameters1
Print13 => Gerber file to be plotted on the Versatec at scale 1
Useful for artwork verification.
The set of aperture is defined in ExpertGerber.parameters2
Print14 => Gerber file to be plotted on the Versatec at scale 2
Useful for artwork verification.
The set of aperture is defined in ExpertGerber.parameters2
Print15 => Gerber file to be plotted on the thermal transfer printer at scale .75
Useful for artwork verification.
The set of aperture is defined in ExpertGerber.parameters3
Print16 => Gerber file to be plotted on the Versatec at scale 1
Useful for artwork verification.
The set of aperture is defined in ExpertGerber.parameters3
Print17 => Gerber file to be plotted on the Versatec at scale 2
Useful for artwork verification.
The set of aperture is defined in ExpertGerber.parameters3
Print18 => Gerber file to be plotted on the thermal transfer printer at scale .75
Useful for artwork verification.
The set of aperture is defined in ExpertGerber.parameters4
Print19 => Gerber file to be plotted on the Versatec at scale 1
Useful for artwork verification.
The set of aperture is defined in ExpertGerber.parameters4
Print20 => Gerber file to be plotted on the Versatec at scale 2
Useful for artwork verification.
The set of aperture is defined in ExpertGerber.parameters4
Print21 => SSoftcard shematic to be plotted on the thermal transfer printer at scale .3
Print22 => Softcard2 shematic to be plotted on the Versatec printer at scale .54
Print23 => Gerber file to be plotted on the Versatec at scale 1
Useful for artwork verification. (SSoftcard)
The set of aperture is defined in ExpertGerber.parameters5
Print24 => Gerber file to be plotted on the Versatec at scale 1
Useful for artwork verification. (BackPanel)
The set of aperture is defined in ExpertGerber.parameters6
Print25 => Gerber file to be plotted on the Versatec at scale 1
Useful for artwork verification. (MST board)
The set of aperture is defined in ExpertGerber.parameters7
Print26 => Softcard2 Memory shematic to be plotted on the Versatec printer at scale .54
Print27 => Softcard2 shematic to be plotted on the Versatec printer at scale .9
Print28 => Gerber file to be plotted on the Versatec at scale 1
Useful for artwork verification. (Softcard2-Memory)
The set of aperture is defined in ExpertGerber.parameters8
Print29 => Softcard2 Memory shematic to be plotted on the Versatec printer at scale .9
Print30 => SSoftcard shematic to be plotted on the Versatec printer at scale .54